The URL can be used to link to this page

Home My WebLink AboutPLANS Patio 915 Moraine Ave 2021-05-204.12.21 4.12.21 4.12.21 4.12.21 4.12.21 4.12.21 "This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program." 1 REPORT NUMBER: 102083832MID-001d ORIGINAL ISSUE DATE: April 28, 2015 REVISED DATE: NA EVALUATION CENTER Intertek 8431 Murphy Drive Middleton, WI 53562 Rendered To: Serge Ferrari Zone Industrielle BP 54 38352 La Tour Du Pin Cedex 38110 LA TOUR DU PIN France Catherine Merillon catherine.merillon@sergeferrari.com PRODUCT EVALUATED: Precontraint 502 EVALUATION PROPERTY: NFPA 701-10, METHOD 1 STANDARD METHODS OF FIRE TESTS FOR FLAME PROPAGATION OF TEXTILES AND FILMS Report of Testing Precontraint 502 for compliance with the applicable requirements of the following criteria: NFPA 701-10, METHOD 1 Standard Methods of Fire Tests for Flame Propagation of Textiles and Films TE S T R E P O R T Serge Ferrari April 28, 2015 Report No. 102083832MID-001d Page 2 of 8 1 Table of Contents 1 TABLE OF CONTENTS ..................................................................................................... 2 2 INTRODUCTION ................................................................................................................ 3 3 TEST SAMPLES ................................................................................................................ 3 3.1. SAMPLE SELECTION ................................................................................................. 3 3.2. SAMPLE AND ASSEMBLY DESCRIPTION................................................................. 3 4 TESTING AND EVALUATION METHODS ......................................................................... 3 4.1. TEST STANDARD ....................................................................................................... 3 4.2. DEVIATIONS FROM THE STANDARD METHOD ....................................................... 4 5 TESTING AND EVALUATION RESULTS .......................................................................... 4 5.1. RESULTS AND OBSERVATIONS ............................................................................... 4 6 CONCLUSION ................................................................................................................... 5 7 REVISION SUMMARY ....................................................................................................... 5 Serge Ferrari April 28, 2015 Report No. 102083832MID-001d Page 3 of 8 2 Introduction Intertek has conducted testing for Serge Ferrari on Precontraint 502 to assess the propagation of flame beyond the area exposed to the ignition source. Testing was conducted in accordance with NFPA 701-10, Method 1 - Standard Methods of Fire Tests for Flame Propagation of Textiles and Films. This evaluation began April 27, 2015 and ended April 27, 2015. 3 Test Samples 3.1. SAMPLE SELECTION Samples were submitted to Intertek directly from the client. Samples were not independently selected for testing. Samples were received at the Evaluation Center on April 21, 2015 in good condition. 3.2. SAMPLE AND ASSEMBLY DESCRIPTION Sample Name: Precontraint 502 Sample Description: Polyester yarns coated with PVC flame retardant on both sides and varnished. Weight: 590 g/m² ± 5%, Thickness: 0.47mm ± 10%, Polyester 1100 dtex: 28% - PVC flame retardant 72% The test specimen identified as Precontraint 502 was cut into 5.9 in. x 15.75 in. samples by Intertek. The samples were weighed in grams before testing. Ten specimens were numbered, weighed and conditioned for at least 30 min. at 220± 5°F (105± 3°C) before testing. The specimens were removed from the oven one at a time and tested within 2 minutes. 4 Testing and Evaluation Methods 4.1. TEST STANDARD The top edge of the specimen was attached to a pin bar so that the specimen was centered and the long dimension of the specimen is in the vertical position with 0.75” binder clips attached to the specimen at each bottom corner to hold it taut. A specified test flame is applied to the bottom center of the specimen for 45 seconds and then removed with eye observation continued. The average weight loss of ten specimens was not greater than forty percent (40%). The percent weight loss of any individual specimen did not exceed the mean percent weight loss value. The average floor flame of ten specimens was not greater than 2 seconds. Serge Ferrari April 28, 2015 Report No. 102083832MID-001d Page 4 of 8 4.2. Deviations from the Standard Method No deviations. 5 Testing and Evaluation Results 5.1. RESULTS AND OBSERVATIONS Environmental Conditions: 72.8⁰F and 48% R.H. Sample No. Wt. Before (g) Wt. After test (g) Percent Wt. Loss AfterFlame Floor Flame 1 36.33 35.83 1.38 0.0 0.0 2 36.14 35.09 2.91 0.0 0.0 3 36.46 35.04 3.89 0.0 0.0 4 36.86 35.81 2.85 0.0 0.0 5 36.97 35.26 4.63 0.0 3.0 6 35.75 34.87 2.46 0.0 0.0 7 35.68 34.42 3.53 0.0 0.0 8 35.69 35.18 1.43 0.0 0.0 9 36.53 35.48 2.87 0.0 0.0 10 36.15 35.46 1.91 0.0 0.0 Average 36.26 35.24 2.79 0.0 0.3 Any fragments that fell to the floor did not burn more than 2 seconds. The average weight loss of the ten samples was less than 40%. The mean percent weight loss value plus three standard deviations of the percent weight loss is 5.77. Based on this information it is concluded the specimen passes the test criteria. Serge Ferrari April 28, 2015 Report No. 102083832MID-001d Page 5 of 8 6 Conclusion Intertek has conducted testing for Serge Ferrari on Precontraint 502 to assess the propagation of flame beyond the area exposed to the ignition source. Testing was conducted in accordance with NFPA 701-10 Standard Methods of Fire Tests for Flame Propagation of Textiles and Films- Method 1. The sample PASSED the testing criteria for NFPA 701-10, Method 1 - Standard Methods of Fire Tests for Flame Propagation of Textiles and Films. INTERTEK Reported by: _____________________ Tolu Bamikunle Lab Technician III, Verification Center Reviewed by: _____________________ Sandy Osborne Lab Technician II, Verification Center 7 Revision Summary DATE SUMMARY April 28, 2015 Original Report