The URL can be used to link to this page

Home My WebLink AboutPERMIT 950 Comanche St Unit A Sign 2021-09-14Revised 2021-01-06 ks Received Date: Town of Estes Park Received By: Sign Application / Permit Permit Number: Permit Expires: Community Development Department - 170 MacGregor Avenue - P.O. Box 1200 - Estes Park, CO 80517 General Sign Information (970) 577-3735 ▪ FAX (970) 586-0249 ▪ building@estes.org Job Address: Parcel #: Business Name: Town License: Phone: Business Owner: Phone: Business Owner Email Address: Property-Owner Name: Phone: Owner’s Permission Slip:  Yes  No Complete Address: Property Owner Email Address: Sign Company: Town License: Phone: Complete Address: Who will install sign?  Sign Company  Owner  Other: Town License # ______ ___ New  Addition  Alteration  Temporary  Signs to be removed: Provide linear feet of building frontage of business: ft. # of frontages: # of stories:  One  Two Note: Max total sign area is 1.5 sq. ft. of linear feet of building frontage of business, .75 sq. ft. for 2nd floor. Note: Max 250 sq. ft. of sign area per business/Max 150 sq. ft. in CD zoning district. Provide total square feet of all existing signs for business: ft² Provide square feet area of proposed sign: ft² Provide new total square feet of signs for business: ft² Sign Type:  Wall  Free-Standing  Window  Awning / Canopy  Other: _________________ ________ Plot Plans Required except for Wall and Window Signs. Note: Plot plans to include property lines, location and setbacks of sign. For Wall and Window Signs provide graphic that shows location of proposed signs on building. Provide graphic representation with dimensions and height of proposed sign. Note: Height is measured from original grade. Height restrictions vary by zoning & sign type. Max 25’ Note: Utility Locates are property owners responsibility, call 1-800-922-1987 Electrical Involved:  No  Yes – State & Town License Required. State Permit and Inspection Required. Sign Illuminated:  No  Yes -  Indirectly  Internally (Comply with EPMC 17.66.041 & EPDC 7.9. Provide cut sheets for lights.) Total Valuation (Labor & Materials) $ _____________________________ I certify this application is true and correct and agree to perform the work described according to plans/specifications submitted, reviewed and approved, and comply with local ordinances, state and federal laws as well as building codes. I certify that I have the property owner’s authority and permission to apply for this permit. Additionally, I UNDERSTAND THAT I AM RESPONSIBLE FOR ANY FEES OR EXPENSES INCURRED FOR PLAN REVIEW, PERMITS, INSPECTIONS AND OTHER FEES ASSOCIATED WITH THIS APPLICATION. Contractor Owner Tenant Signature Date Print Name _________________________________________________________ *** Office Use Only *** Jurisdiction: _______ Applicable Code: ________ Zoning: ________ Overlay Zoning: ________ (e.g. FPDP, geo-hazard, historic district) Total allowable sign area for business: _____ ft²_ this frontage (max. 250 per business) Sign Type: ______ _ Special Requirements:  Engineering / Building Review Required  Sanitation Required  Life Safety Minimum Setback F ________ S ________ R ________ Maximum Height ___ ___ft Conforming Legally Non-Conforming Ill-legally Non-Conforming Prohibited Exempt Denied Permitted Comments: Sign Permit Fee $ 75.00 Building Permit Fee Planning Review Fee County Tax Planning/Building Official Date Total APPROVED by SAFEbuilt; 2015 International Codes Subject to inspection and compliance to all Relevant, adopted Building & Municipal Codes 09/20/2021 Reviewed by SAFEbuilt 09/20/2021 Use non-corrosive fasteners Reviewed by SAFEbuilt 09/20/2021