HomeMy WebLinkAboutPERMIT 501 Big Thompson Ave Remodel 2011-01-04
ctraufield@estes.org http://www.estesnet.com
(970) 577-3722 P.O. BOX 1200 170 MAC GREGOR AVENUE ESTES PARK, CO 80517 FAX (970) 586-0249
INSPECTION RECORD
JOB ADDRESS: 501 BIG THOMPSON AVE DATE: 2011.01.26-09:00
PERMIT #: B-9003 TYPE OF INSPECTION:FRAMING
CONTACT: TRACY / CLARK ENT CONST 0-567-0677 BL#:????
ADDITIONAL INFO: MCDONDALDS, BETWEEN 12 – 4. 1/25/11-ROLL TO WED AM
INSPECTION STATUS: FRAMING APPROVED
COMMENTS
1. SMALL JOB – REVIEWED WITH TRACY. NEXT CALL = FINAL
Building Inspector / Code Enforcement Officer Traufield
OFFICE USE ONLY
CC Log – Create / Review / Update Planning – Contact / Review with / Submit to
PTWin – Review / Update Other Depts – Contact / Review with / Submit to
Address Folder (e) – Create / Review / Update Download Jpeg / WAV files
Address Folder (paper) – Review Create tickler in Outlook
Create Inspection Record Issue Inspection Record
Create NOV Issue NOV
Ownership research Update contractor folder
U:\\AddressFiles\\Big_Thompson_Ave\\501_Big Thompson Ave (McDonald's)\\501_Building\\501_B-9003\\501_2011.01.26_IR_FRAMING.doc
N/A
80517
10128
10/18/10 JON RYAN
RDS, TD, DP
BOB LUTHER
TERAH DeFORESTEVE ST. JOHN
Cover Page
40914
National Number
501 BIG THOMPSON AVE.
TD, DPFINAL PLAN SET CREATED. TRASH UNIT CHANGED TO "TRASHBOX"11/4/101
Phone Number: 970-586-3434
ESTES PARK, CO
Description
ByDateRev
Date.Drawn By.Designer.Project Manager.Account Executive.Location.Contact.
Job.Sheet Title.Scale.Sheet.
core drilled holes
level the vertical
guaranteed.
Project Manager:Steve St. John(800) 837-8373 Ext. 2073
come in contact with caustic
Use only mild soap and water solution
All freestanding chairs should be removed
If floors are periodically acid washed, then all
Finish PlanReflected Ceiling Plan Elevations ElevationsISI Details G.C. DetailsI.S.I. SpecificationsG.C. Specifications
Sheet Index
: ISI advises that the chairs
from the cleaning area to prevent mop water and chemicals fromadversely affecting the metal chair (especially beneath chair legguards).chairs should be removed from the dining room to
avoid the acidsolution from corroding the chair frame finish. Frames that comeinto contact with corrosive chemicals will appear discolored.to clean the frames and seats.
ISI is not liable for cored steel that becomes unstable as a result of coreISI is not responsible for damage of any mechanicals located within 5" ofIn the event that ISI installers core
through a slab less than 5" a $30 perFloor/base tile must be in good repair before any core drilling begins.The general contractor is to leave a minimum of 40 pounds of floor tileISI
recommends the use of por-rok brand as a cement adhesive forISI recommends when the general contractor/installer are setting cored
ISI does not accept responsibility for its product replacement that is due toLimited Warranty. ISI warrants to the Owner/Client that the products soldA minimum of a 5" concrete slab,
is required, for all core drilling of chairs,
otherwise damaged once ISI's product has been delivered, and or afterdelivery of products to the delivery point. There is NO WARRANTY in casesof damages in transit, negligence, abuse,
abnormal usage, misuse,accidents, normal wear and tear, damage due to environmental or naturalelements, failure to follow ISI's instructions, or improper installation, storageor maintenance.chemical
s (acetone, paint thinner, muriatic acid, nail polish remover,cleaning chemicals other than (kadet) quarry tile cleaner may permanentlydamage the metal finish of your chairs and nullify
the warranty.ISI's design and drawings are the sole property of ISI. ISI requires that theGeneral Contractor and Owner/Client return all sets of drawings andspecifications, except one
for their reference, to ISI upon completion of thework.drilling through a concrete slab less than 5" thick.the finished floor.footing, and set steel. This type of repair is grout to
finish the core drilled holes.cored-in steel.supports, level only the horizontal top plate.
misuse by other entities during construction. The General Contractors isresponsible to protect ISI product from being climbed upon, scratch orinstallation is substantially complete.
here under will be free from material defects in workmanship and materialunder normal use and service for a period of one year from the date of ISI'sbleach, 409) that will damage the
metal finish and/or the seat. Floor booths, tables and halfwalls.hole charge will apply. This charge is to excavate core hole, pour concretepost.
I-1Cover PageI-2Floor PlanI-3I-4I-5 I-6Graphics PageI-7I-8I-9
I-2aDimension Plan I-5a I-7a
Account Executive:Jon Ryan Terah DeFore According to the floor plan, there will be approximately
(913) 530-2959 Project Designer:(559) 423-5764 required for Interior Systems, inc. seating. (does not include decor or halfwallsif applicable.)
PageDescription
Floor and base tile to be grouted, cleaned and in place for a minimum ofThe floor is broom clean.All openings to have glazing and frames installed.The HVAC system to be installed and
in use.The ceiling grid and tile or other system to be installed.Lighting fixtures to be installed.Water supply convenient to work space.Electrical service of two 120v/30 amp circuits
to be available.Work space to be free of other contractors attempting to complete theirDumpster available for packaging disposal.Finished parking lot or subsurface within 1" of finish
grade for delivery of
48 hours.work.product.
ISI shall deliver the products F.O.B. ISI plants. All risk of loss, damage or delay shall passThe General Contractor will alert ISI installation crew to any under slab conditions that
ISI provides design services and custom product design and manufacture to eachPrior to the delivery and installation for ISI fixtures and furnishings: Interior wall finishedRefer to
section titled "Work Covered by the Contract Documents" for ISI's requirements ofThe cleanliness and maintenance of the site is the responsibility of the General
The Owner/Client shall verify the condition of the shipment and notify ISI of any damagewithin 24 hours.Transfer of title occurs upon shipment F.O.B. ISI plants.The Owner/Client shall
accompany an ISI representative on Project completion walkthrough to identify incomplete work. to the Owner/Client upon ISI's delivery of or installation of the products. All delivery
datessuch delivery dates, but does not guarantee to meet such dates. Failure by ISI to meet anyTime for delivery and installation shall not be of the essence.should other elements of
the project cause change. Revisions to the work that affect time free for hazardous work space. ISI agrees to us Owner/Client supplies cleaning materialsfor the final wipe down at time
of project sign-off. The Owner/Client is responsible for thefinal cleaning of the space and all design elements.
are approximate. Delivery dates given by ISI are based on prompt receipt of all necessaryinformation to be provided by the Owner/Client. ISI will use reasonable efforts to meetdelivery
date does not constitute a cause for cancellation and/or damages of any kind. Owner/Client. ISI is not the prime contractor responsible for coordination of all contractorsand vendors.
ISI relies upon the Owner/Client and General Contractor to review allcontract documents from multiple vendors for the work. ISI expects to provide revisions asneeded for proper coordination
of the entire work within reasonable commercial practiceand scope may be subject to change order acceptance. including, but not limited to, wall coverings, wainscoting, paint, chair
rail, molding, shallbe completely installed. General Contractor to provide accurate and timely field dimensions.may be affected by core drilling. Those items include but are not limited
to water lines,rebar, electrical conduit and other common building system elements. Contractor. ISI agrees to dispose of its own packaging and other installation waste in thedisposal
system provided by the General Contractor. ISI agrees to maintain a clean and
PRODUCT REQUIREMENTSEXAMINATION AND CLOSE OUT REQUIREMENTS
table height
4
"28-
1
toe space
knee space
awings, specifications or contract.
6"
19"
42"
36"
nearest
length of wheelchair
obstruction
table edge to the
wheelchair
width of
When different types of seating and/or separate seats are provided, theWhere seating for people in wheelchairs is provided, at fixed tables orWhere seating spaces for people in wheelchairs
are provided at fixedThe tops of accessible tables and counters shall be from 33" to 35" above
A minimum of 5%, but not less than one, of the fixed or freestandingAll permits and fees are the responsibility of the Owner/Client and their
30"
the location of the nearest accessible entrance. The accessible entrancesshall be marked with the symbol of accessibility per ADAAG 4.1.2 (7). Suchsignage is to be provided by the owner/client
and is not in ISI's contractAll facilities and elements of such are required to have signage indicatingAt toilet rooms, where permanent identification is provided, signs shall beWhere
there is no wall space adjacent to the latch side of the door, the signshall be located on the nearest adjacent wall. ADAAG 4.30.6tables shall comply with ADAAG 4.32. An accessible
route should lead towhere a minimum of 5% of the total number of tables comply with theseating requirements. ISI shall not be responsible for any installationswhere the Owner/Client
has decided to provide a number less than thissection of the ADA.accessible seating shall be proportionally distributed throughout the seatingareas.counters, clear floor space complying
with ADAAG 4.2.4 shall be provided.Such clear floor space shall not overlap knee space by more than 41".ADAAG 4.32.2tables or counters, knee space of at least 27" high, 30" wide, and
19" deep,shall be provided. ADAAG 4.32.4the finished floor or ground. ADAAG 4.32.4
Directional signage is required at inaccessible public entrances indicatingunless specifically called out on the draccessibility, and shall use the international symbol of accessibility.installed
on the wall adjacent to the latch side of the door at 60" AFF.and through such fixed or freestanding seating areas. ISI provides layoutsagents. ISI agrees to provide drawings and specifications
to be included inpermit sets as needed.
10128
ility Guidelines (ADAAG)
or tend to screen out people with
ESTES PARK, CO
E
ISI strives for the contract documents to conform to the Internationalcodes.ISI strives for the contract documents to conform to the Title III of theAmericans with Disability Act (ADA).
ISI is not licensed to providesigned/sealed drawings. ISI cooperates with all Owner/Client's licensedcannot be responsible for construction deviations by others from the designthat
may create situations out of compliance with the ADA.Title III prohibits private entities from discriminating on the basis ofdisability in places of public accommodation, and requires
all newlyconstructed and altered places of public accommodation and commercialfacilities to be constructed to be accessible.Places of public accommodation are required to make reasonableauxiliary
aids and services to persons with disabilities; unless doing sowould fundamentally alter the nature of the goods, services, facilities,eligibility criteria that screen out disabilities
from fully enjoying any goods, services, facilities, privileges,advantages or accommodations. This is unless such criteria are necessary toenable the entity to provide the goods, services,
or benefits it is in theFrom the American with Disabilities Act Accessibsubpart A36.103 (C)This part does not invalidate or limit the remedies, rights, and proceduresof any other Federal
Laws, or State or Local Laws (Including State Commonassociated with them.One route at least 36" wide shall connect all entrances and spaces of theAn accessible path shall be provided
into each secondary aisle.Doors shall have a minimum clear opening of 32" with the door open at 90degrees. If doorways have two independently operating doors, at least oneDoor Hardware
on the accessible doors shall have a shape that is easy tograsp with one hand and does not require a tight pinching, grasping ortwisting of the wrist to operate. Lever operated, push-type
and U-shaped48" AFF.Ground and floor surfaces along the accessible routes and in accessibleshall be stable, firm, slip resistant and comply with ADAAG 4.5. ThisObjects protruding from
walls shall extend max. 4" if between 27" AFF andsoffits or other elements suspended from the ceiling.Projections may not reduce the clearance required for an accessible route.At a
sales and service counter, where a cash register is placed, and/orother goods and services are distributed; a portion of the counter will be
Building Code 2003. ISI is not licensed to provide signed/sealed drawings.ISI cooperates with all Owner/Client's their licensed professionals and otherlicensed professionals to provide
drawings and specifications that meet localprofessionals to provide drawings and specifications that meet the law. ISImodifications to their practices, policies or procedures, and to
provideprivileges, advantages and accommodations offered, or would result in andundue burden. A pace of public accommodation may not impose or applybusiness of providing.Law) that
provide greater or equal protection for the rights of individualsbuilding. Main aisles shall be no less than 60" wide for a double walkway.leaf must meet the minimum requirements.handles
are acceptable. Door Hardware shall be mounted no higher thanrooms and spaces including floors, walks, ramps, stairs, and curb ramps,includes any type of mat or rug that may be placed
on top of surfaces.80" AFF max. A minimum head clearance of 80" AFF is required for anyhanging objects such as pendant lighting fixtures, ceiling fans, signage,36" wide when facing
the customer and a maximum height of 34"AFF.
QUALITY REQUIREMENTS
National Number
onnection
they are prepared is completed or executed. If the Owner has paid ISI theschedules and specifications for information and reference in cwith the Owner's use and occupancy of the Project.
If the Owner without ISIthereof. The Owner may not use the drawings, schedules, specifications orthe Project or for any other purpose. ISI (or, as appropriate, itssubcontractor) is
the author and owner of all drawings, schedules,specifications or other instruments of service provided here under andtermination of this Contract for Design Services by ISI due to
the Owner'sschedules, specifications and other instruments of service. The Owner maywith respect to the Project. ISI's written permission must be obtained prior toservice for future
additions or alterations to the Project. The designsthe design. In other words, ISI is the sole proprietary manufacturer of theAll computer files containing conceptual imagery, illustrations
and allAll rights reserved.
Drawings, schedules and specifications and other instruments of service areand shall remain the property of ISI whether or not the Project for whichcompensation described in Section
VI, the Owner shall be permitted toretain copies, including a set of non-reproducible copies of drawings,approval modifies the drawings, schedules and/or specifications, ISI is notresponsible
for any loss, cost or damage relating to use or applicationother instruments of service provided here under for any project other thanretains all statutory and common law copyrights
and other rights. Uponbreach, the Owner shall no longer have the right to use drawings,not permit any third party to use such drawings, schedules, specificationsand other instruments
of service, except as expressly provided herein andusing such drawings, schedules, specifications and other instruments ofdepicted within the contents of the drawings belong to ISI
and that in future"fulfillment" stages of the project that these designs and drawings may notbe used by the Owner to shop for other manufacturers to fulfill the intent ofitems in the
design.images within the contract documents in the form of artwork or othergraphic design are copyrighted and remain the intellectual property of ISI.The Owner/Client and General Contractor
agree that ISI representativesmay visit the site at any point during construction in the interest ofcompleting ISI's work.ISI agrees to cooperate with the Owner/Client and Owner/Client'srepresentati
ves to complete the work as described in the contractdocuments. The Owner/Client agrees to provide conditions conductive toaccurate and timely completion of the work.The General Contractor
agrees to provide conditions conducive to completeinstallation of ISI's work upon delivery of ISI product. The GeneralContractor agrees to cooperate with ISI installation crews in the
interest ofcompletion of the work. The General Contractor will inform ISI if there areany physical restrictions that may impede the completion of ISI's work.ISI product turn around
from execution of contract to delivery andinstallation is eight weeks. The Owner/Client and General Contractor areresponsible for management and communication of schedule which allowsadequate
time for production, shipment and installation of design elementsin the expect time frame.Project meeting that ISI representatives may attend include pre-constructionmeetings, pre-installation
meetings and post installation/punch listmeetings. Two weeks notice of meetings is requested to ensure ISI'sparticipation.
OWNERSHIP AND USE OF DOCUMENTS WORK RESTRICTIONS ADMINISTRATIVE REQUIREMENTS
501 BIG THOMPSON AV
other items delivered by ISI to the site address. In the event that ISI iscontracted to install the product, the items are noted on drawings asprovided by ISI. Items specified by ISI
but not installed by ISI are noted inthe drawings and specifications and re-called out as "installed by G.C."may include the General Contractor's subcontractors or other entities hiredby
the Owner/Client.not part of ISI's responsibilities to install. As part of ISI's design services tothe Owner/Client, ISI specifies interior elements for the overall design.describe
items installed at a later date.coordination of all contract elements from all contracts. The ISI Lightingdesign. The ISI core drill plan, if included, is the basis for location of
designelements, fixtures and furnishings. The General Contractor agrees toprovide ISI with actual field dimensions verifying existing locations of walls,openings, columns, fixed elements
and any other physical element of theproject. If field dimensions are not provided prior to ISI product productionthe General Contractor may be responsible for charges related to any
fieldchanges, product alterations of product being re-produced.At the time of drawing and specification finalization by ISI, some itemsdescribed in the contract documents may include
Owner/Client furnishedproducts, salvaged material and equipment, products delivered to theOwner/Client and Owner/Client installed products. Unless specificallynoted in the contract
documents and drawings, the installation of theseitems is the Owner/Client's responsibility.in these drawings. The contractors separately contracted to complete theWork may include
a General Contractor, Kitchen Equipment Supplier,Contractor is considered the prime entity on site with the responsibility forsite readiness, project scheduling and coordination of
all separate contracts.Contractor, are responsible for orchestrating the sequence of work andwork readiness for ISI and all contractors to complete the work. Changes tosequencing, site
readiness, scheduled time and scope of work may cause achange order to be issued to the Owner/Client.The Owner/Client is responsible for providing ISI drawings andspecifications to
the General Contractor. The Owner/Client is responsiblefor providing any other contractor or vendor drawings and specifications toresponsible for coordination of all drawings and specifications,
andinstallation of any back-up material to support ISI's product as noted in thecontract documents. The Owner/Client and General Contractor areresponsible for communication of any schedule,
scope or other changed tothe project that may affect ISI's completion of the work.
(General Contractor). Items noted to be installed by the General ContractorLayout, if included, is provided as a guideline to complete the intent of theEquipment Vendors, Landscaping
Contractor and others. The GeneralISI that is related to ISI's completion of the work. The General Contractor is
The drawings and specifications produced by ISI include elements that areThe General Contractor is responsible for the means and methods and final
The information in this set of drawings describes the fixtures, furnishings andIn the event that the work is to be phased in time, notes depicting "future" The Owner/Client may contract
with multiple entities to complete the projectThe Owner/Client and the prime contractor, frequently the General
GENERAL REQUIREMENTSMULTIPLE CONTRACT SUMMARY
80517" = 1'-0"
10128
16
10/18/10 JON RYAN
RDS, TD, DP 3
BOB LUTHER
TERAH DeFORE Floor Plan
STEVE ST. JOHN
40914
National Number
501 BIG THOMPSON AVE.
TD, DP11/4/101
FINAL PLAN SET CREATED. TRASH UNIT CHANGED TO "TRASHBOX"
Phone Number: 970-586-3434
ESTES PARK, CO
DateDescriptionByRev
Date.Drawn By.Designer.Project Manager.Account Executive.Location.Contact.
Job.Sheet Title.Scale.Sheet.
WHEELCHAIRACCESSIBLE
ISI HALFWALLG.C. HALFWALL
2" SQ. CORED SUPPORT2" SQ. CORED SUPPORTw/ LARGE PLATE2" SQ. CORED SUPPORTw/ OFFSET PLATE3" SQ. CORED SUPPORT
FLOOR PLAN KEY
HIGH CHAIR
-
843
10
TABLES:
5% W.C. ACCESSIBLE
-
3
10161616
5825
SEATS:
ONE'STWO'STHREE'SFOUR'SFIVES & UP
MENWOMENRESTROOMS
2.3
SN1SN2SN3
SIGNAGE PLACED BY OWNER
SEATING RATIO:
SILL HT: 35"SILL HT: 35"
2
2
2
2
2
"
b2460RL
b2460RR
2
58
2
"
58
4'-4
B6
1BD601BD60
3'-0
B4 3'-1"
B5
2
"
12
E
F
G
I-5a
I-5a 3'-10
I-5a
1BS42
C
1BCRN-R
SILL HT: 35"
2
1111111
1BS42
HIRING KIOSKCLEAR PER ADA
WALL-MOUNTED
A1
30"W x 27"H x 19"D
WITH SIDE SCREENS.
BAR HT.BAR HT.BAR HT.BAR HT.BAR HT.
BAR HT.BAR HT.BAR HT.2
"
78
2S962S602S60
IS STRICTLY PROHIBITED. PURCHASED AND DO NOT FIT IN THE INTENEDED SPACE.
- THIS IS PROPRIETARY TO ISI. ANY UNAUTHORIZED USE OR REPRODUCTION- ISI WILL NOT BE HELD LIABLE FOR NON-ISI ITEMS THE CUSTOMER- ALL DIMENSIONS TO BE VERIFIED.3'-7
D
I-5
11
111
B1
B2
B3
E
a2777BAR HT.
111
11
SILL HT: VERIFY
9'-0"
SERVICE COUNTER
2
B
"
I-5
1
8
3'-8
1
TU
2
1BS42
MENU BOARD
A
CREW ROOM
1 I-5
PLACED BY OWNER
A1
2
8'-5"
SILL HT: 35"
1BCRN-L
8
"3'-0
7
2
EXISTING CBB UNITAND DECOR
C
I-5
"
38
6'-6
BEVERAGE CENTER
80517" = 1'-0"
10128
16
10/18/10 JON RYAN
RDS, TD, DP 3
BOB LUTHER
TERAH DeFORE
STEVE ST. JOHN
40914
National Number
Dimension Plan
501 BIG THOMPSON AVE.
TD, DP11/4/101
FINAL PLAN SET CREATED. TRASH UNIT CHANGED TO "TRASHBOX"
Phone Number: 970-586-3434
ESTES PARK, CO
DateDescriptionByRev
Date.Drawn By.Designer.Project Manager.Account Executive.Location.Contact.
Job.Sheet Title.Scale.Sheet.
MUST BE VERIFIED!
BUILDING DIMENSIONS ARE PER
INTERIOR SYSTEMS INC. SALES REP.
ISI HALFWALLG.C. FULL HEIGHT WALL
10'-2"
WALL KEY
3'-0"6'-5"5'-1"6'-3"
9'-7"3"
"
14
5'-0
1'-3"1'-3"
1'-1"
1'-4"1'-4"
FD= 6'-4"
3'-0"11"
2'-8"
2"
4'-10"6"2'-0"6'-0"2'-0"6"
2'-5"
"
78
4'-4
6'-3"HOLD TO 5'-3"
2'-0"
8"
2'-6"
9'-7"
3'-7"
2"
3'-0"8"
6'-3"
2'-6"
6'-6" VERIFY
1'-3"
10"3'-0"2'-10"2'-4"
2
5'-1"
"4
1
FD= 4'-11"
2'-5"
2'-6"
3"
VERIFY
19'-5"7"3'-0"
HOLD TO 5'-0"
"
34
"
1'-3
12
4
"
3'-4"
34
7'-11"
1'-7
11'-6"
3"
17'-2"
SERVICE COUNTER
2'-5"
2
"4
1
HOLD TO 6'-0"
MENU BOARD
2'-6"2'-10"
6'-3"
9'-7"
SERVICE COUNTER TO BE
5'-4"
"
38
6'-3"HOLD TO 5'-3"1'-3"
8"
MOVED TOWARD DINING AREA BY 2'-0"
2'-8"
1'-3"3'-0"3'-1"4"
HOLD TO 4'-8
2'-11"
6"
BEVERAGE CENTER
4'-11"
5'-10"
12'-1"
80517
10128
10/18/10 JON RYAN
RDS, TD, DP
1/4" = 1'-0"
BOB LUTHER
TERAH DeFORE
STEVE ST. JOHN
Finish Plan
40914
National Number
501 BIG THOMPSON AVE.
TD, DPFINAL PLAN SET CREATED. TRASH UNIT CHANGED TO "TRASHBOX"11/4/101
Phone Number: 970-586-3434
ESTES PARK, CO
DateDescriptionByRev
Date.Drawn By.Designer.Project Manager.Account Executive.Location.Contact.
Job.Sheet Title.Scale.Sheet.
R
O
THIS PLAN IS DESIGNED UTILIZING WALL TILE. IT IS THE
REPRODUCTION IS STRICTLY PROHIBITED.SYSTEMS IS NOT RESPONSIBLE FOR THE VERIFICATION OF ANY LOCAL OSTATE TILE REFLECTIVITY CODES. THE USE OF THE TILES SPECIFIED INTHESE PLANS IS AT
THE SOLE DISCRETION OF THE CUSTOMER. THETO VERIFY WITH ALL STATE AND LOCAL CODES PERTAINING TO THE
- THIS IS PROPRIETARY TO ISI. ANY UNAUTHORIZED USE OR- ALL EXISTING WALL TRIM REFINISHED AS SPECIFIED - SEE SPECIFICATIRESPONSIBILITY OF THE GENERAL CONTRACTOR / OWNER OPERATOR /CUSTOMER
TO VERIFY ALL LOCAL TILE REFLECTIVITY CODES AS THEYPERTAIN TO THE USE OF ANY TILE ON ANY VERTICAL SURFACE. INTERIOGENERAL CONTRACTOR / OWNER OPERATOR OF THIS STORE WILL NEEDREFLECTIVITY
OF THE WALL TILING. DUE TO VARYING STATE ANDREGIONAL CODES, ISI WILL NOT BE RESPONSIBLE FOR MEETING THESECODES DUE TO TILE-LIGHT REFLECTIVITY.
ISI HALFWALLG.C. HALFWALL
21a,24,25,34
FLOOR PLAN KEY
21a,24,25,34
21a,24,25,34
C,25
21a,24,25,34
21a,24,25,34
44
21b
21a,24,25,34
33
35
SERVICE COUNTER
31a
35
MENU BOARD
41
35
46
21a,24,25,34
3545
BEVERAGE CENTER
42
34
333435
31a21b
C,25
21a,24,25,34
FLOOR TILE LEGEND
WALL FINISHES LEGEND
SYMBOLTAGSYMBOLTAG
80517" = 1'-0"
10128
16
10/18/10 JON RYAN
RDS, TD, DP 3
BOB LUTHER
TERAH DeFORE
STEVE ST. JOHN
40914
National Number
501 BIG THOMPSON AVE.
TD, DP11/4/101
FINAL PLAN SET CREATED. TRASH UNIT CHANGED TO "TRASHBOX"
Phone Number: 970-586-3434
Reflected Ceiling Plan
ESTES PARK, CO
DateDescriptionByRev
Date.Drawn By.Designer.Project Manager.Account Executive.Location.Contact.
Job.Sheet Title.Scale.Sheet.
1112
1415
SYMBOLTAG
REFLECTED CEILING PLAN KEY
* ALL LIGHT BULBS TO BE SUPPLIED & INSTALLED BY THE G.C.* G.C. TO CONTACT MCDONALD'S CONSTRUCTION ENGINEER FOR THE FINAL HVAC PLACEMENT.* ALL ELECTRICAL FIXTURES, WIRING, & INSTALLATIONS
TO BE UL APPROVED* G.C. TO CENTER PENDANTS OVER TABLE TOPS, AFTER TABLES HAVE BEEN PERMANENTLY INSTALLED* ALL EXISTING CEILING TILE & TRACK TO BE REMOVED BY THE G.C.* EXISTING BULKHEADS
TO REMAIN - G.C. TO REFINISH AS SPECIFIED.
3
1b
2
EQ
OPEN
E.Q.
CEILING HEIGHT: 8'-8"
4"
E
3'-4"
E.Q.
4'-0"
2
"1'-2
1
7'-9"
EQ
3
EXISTINGCBB SOFFIT
D,21a
ADJUSTMENTS TO LIGHTING QUANTITIES OR
NOTE: USE LIGHTING LAYOUT AS AGUIDELINE ONLY. ISI WILL NOT BE HELDLIABLE FOR ADDITIONAL COSTS DUE TOLOCATIONS FOR PERSONAL PREFERENCE, ORLOCAL CODES.
80517
10128
JON RYAN
10/18/10
RDS, TD, DP
3/8" = 1'-0"
BOB LUTHER
TERAH DeFORE
STEVE ST. JOHN Elevations
40914
National Number
501 BIG THOMPSON AVE.
TD, DP11/4/10
FINAL PLAN SET CREATED. TRASH UNIT CHANGED TO "TRASHBOX"1
Phone Number: 970-586-3434
ESTES PARK, CO
DateDescriptionByRev
Date.Drawn By.Designer.Project Manager.Account Executive.Location.Contact.
Job.Sheet Title.Scale.Sheet.
- THIS IS PROPRIETARY TO ISI. ANY UNAUTHORIZED USE OR REPRODUCTION IS STRICTLY PROHIBITED.- IF SPECIFIED ITEMS ARE NOT AVAILABLE, PLEASE CONTACT ISI IMMEDIAT- WRITTEN DIMENSIONS HAVE
PRECEDENCE OVER SCALE IN ALL CASES.- ALL ARTWORK TO BE CENTERED AT 5'-10" A.F.F.- ALL ARTWORK TO BE PERMANENTLY ATTACHED TO THE WALL.- BOTTOM OF PENDANT LIGHTS TO BE HUNG AT 5'-6" &
6'-0" A.F.F.
34
EXISTING
EXISTING
21a
34
4'-0"
E.Q.E.Q.
4'-0"
E.Q.
4"
2'-10"
35
3
5'-0"
E.Q.
34
42
21a
8'-2"
ELEVATION
OPEN
EQ
TILE PER OWNER
3'-4"
8'-8"
EQ
5'-0"
E
8'-2"
6'-0"
3'-6"
3
33
1'-0"3'-0"
15
EQ.
11'-6"
MENU BOARD
EXISTING CBB DECOR
EQ.
EXISTING CBB SOFFIT
35
4'-0"
E
EQ.
3'-0"A1A1
OPEN
(TYP)
2'-3" CLEAR
5'-6"
2'-6"
ELEVATION
21a
34
34
ELEVATION
ELEVATION
3'-3"
8'-8"
586-3434
80517
10128
JON RYAN
10/18/10
RDS, TD, DP
3/8" = 1'-0"
BOB LUTHER
TERAH DeFORE
STEVE ST. JOHN Elevations
40914
National Number
501 BIG THOMPSON AVE.
TD, DP11/4/10
FINAL PLAN SET CREATED. TRASH UNIT CHANGED TO "TRASHBOX"1
Phone Number: 970-
ESTES PARK, CO
DateDescriptionByRev
Date.Drawn By.Designer.Project Manager.Account Executive.Location.Contact.
Job.Sheet Title.Scale.Sheet.
3'-3"
ANY UNAUTHORIZED USE OR REPRODUCTION IS STRICTLY PROHIBITED.
- THIS IS PROPRIETARY TO ISI.- IF SPECIFIED ITEMS ARE NOT AVAILABLE, PLEASE CONTACT ISI IMMEDIATELY.- WRITTEN DIMENSIONS HAVE PRECEDENCE OVER SCALE IN ALL CASES.- ALL ARTWORK TO BE CENTERED
AT 5'-10" A.F.F.- ALL ARTWORK TO BE PERMANENTLY ATTACHED TO THE WALL.- BOTTOM OF PENDANT LIGHTS TO BE HUNG AT 5'-6" & 6'-0" A.F.F.
5'-10"
3'-11 1/2"
L
C
3
EQ
E.Q.
B5
E.Q.
B3
7'-11 1/2"
5'-8"
L
C
B2
(TYP)
5'-8"5'-6"
2'-0"
3'-3"
7'-11 1/2"
4'-0"
3'-0"
B1
E.Q.
EQ
4'-0"
21b
23a
B4
E.Q.
(TYP)
5'-10"
3'-7"
23a
C
21a
21a
OPEN
34
23a
21a
3'-3"
21a21a ELEVATION
ELEVATION
ELEVATION
4'-0"
8'-8"
8'-8"
80517
10128
10/18/10 JON RYAN
RDS, TD, DP
BOB LUTHER
Not To Scale
TERAH DeFORE
STEVE ST. JOHN
40914
Graphics Page
National Number
501 BIG THOMPSON AVE.
TD, DP11/4/101
FINAL PLAN SET CREATED. TRASH UNIT CHANGED TO "TRASHBOX"
Phone Number: 970-586-3434
ESTES PARK, CO
DateDescriptionByRev
Date.Drawn By.Designer.Project Manager.Account Executive.Location.Contact.
Job.Sheet Title.Scale.Sheet.
B6
DESIGN ELEMENT B - ARTWORKDESIGN ELEMENT C - GRAPHIC WALLCOVERING
B1B2B3B4B5
80517
10128
10/18/10 JON RYANAs Noted
RDS, TD, DP
BOB LUTHER
TERAH DeFORE ISI Details
STEVE ST. JOHN
40914
National Number
501 BIG THOMPSON AVE.
TD, DP11/4/101
FINAL PLAN SET CREATED. TRASH UNIT CHANGED TO "TRASHBOX"
Phone Number: 970-586-3434
ESTES PARK, CO
DateDescriptionByRev
Date.Drawn By.Designer.Project Manager.Account Executive.Location.Contact.
Job.Sheet Title.Scale.Sheet.
1" TRIM
TRIM TO BE FLUSH WITH LAMINATED WALL
INSET ACCENT LAMINATE(INSET 1/2")1" TRIMLAMINATED WALLSUPPORTBASE TILE
4 1/2"
12"
MODENA BOOTH DETAILMET CHAIR DETAILTRASHBOX TRASH UNIT DETAIL
1/2"
48"
DESIGN ELEMENT "A" SECTION
80517
10128
10/18/10 JON RYANAs Noted
RDS, TD, DP
BOB LUTHER
TERAH DeFORE
STEVE ST. JOHN
G.C. Details
40914
National Number
501 BIG THOMPSON AVE.
TD, DP11/4/101
FINAL PLAN SET CREATED. TRASH UNIT CHANGED TO "TRASHBOX"
Phone Number: 970-586-3434
ESTES PARK, CO
DateDescriptionByRev Description
Date.Drawn By.Designer.Project Manager.Account Executive.Location.Contact.
Job.Sheet Title.Scale.Sheet.
VERIFY
PAINT
3
1a
CEILING TILE
SCHLUTERRONDEC-EB
24
WAINSCOT TILE
BUILDING WALL
1b
CEILING TILE
DETAIL IS INTENDED TO SHOWFINISHES ONLY. BULKHEAD ISEXISTING AND CEILING HTS. TOREMAIN THE SAME.
D DETAILBULKHEAD SECTION @ SIDE DINING
WAINSCOT TILE
CORIAN SILLCONTOUR EDGE AS DESIRED
WINDOWMULLION
SEALANT
WOOD OR METAL FRAMING EVERYMOISTURE BARRIER, CONTINUOUS LAYER OF 4MMWAINSCOTTINGWALL SURFACEWALL
POLYTHYLENE FILM (CLEAR OR BLACK)
18-24" OR CONTINUOUS SUPPORT
22
WAINSCOT TILE
1/2"
47
SCHLUTER QUADEC-EB
VERIFY
21a
1a
WALLCOVERING
CEILING TILE
4"
41
FLOOR TILE
31c SCHLUTER DILEX-EHK
WALL TILE
30"
FLOOR SLAB
BUILDING WALL
RESTROOM COVE BASE DETAILCORNER GUAR
SERVICE COUNTER TOP DETAILWINDOW SILL DETAILCHAIR RAIL DETAIL
1a
BULKHEAD SECTION @ BEVERAGE CENTER
CEILING TILE
DETAIL IS INTENDED TO SHOWFINISHES ONLY. BULKHEAD ISEXISTING AND CEILING HTS. TOREMAIN THE SAME.
N/A
80517
10128
10/18/10 JON RYAN
RDS, TD, DP
BOB LUTHER
TERAH DeFORE
STEVE ST. JOHN
40914
National Number
501 BIG THOMPSON AVE.ISI Specifications
TD, DPFINAL PLAN SET CREATED. TRASH UNIT CHANGED TO "TRASHBOX"11/4/101
Phone Number: 970-586-3434
ESTES PARK, CO
DateDescriptionByRev
Date.Drawn By.Designer.Project Manager.Account Executive.Location.Contact.
Job.Sheet Title.Scale.Sheet.
Wilsonart, 7943K-07 Colombian Walnut,
Nearly Chrome w/ Clear Coat
Tiled by GC
Aluminum, Per ISI Production
Nevamar, WZ0018T Natural Bamboo
Abet Laminati, 446 SEI
Aluminum
Wilsonart, 4830K-18 Stainless Steel
Nearly Chrome w/ Clear Coat
Plexiglass Type II Wallcovering
1" Chrome Stand-offs
Base tiled by GC
Wilsonart, 7943K-07 Colombian Walnut, vertical grain
Metal Lettering: Mounted on 1/4" Standoffs on Flat BarLaminated Curved Counter / Soffit: Laminated Support Wall: Laminated Support Wall Base: "M" Logo Cut-out with Stand-offs: Base Guard
for Turn Down: 3/8" Thick Threaded Rod: No Covers, to Support Soffit4"W x 4'-0"L Soffit Opening for Pendant: Wilsonart, 7943K-07
Wall: Laminated Inset Accent: 1" laminated trim: 1/2" Corner Guards: Support: Graphic Output: Hardware: Graphic Output:
A1 Size: 6'-3"L + 6'-3"L x 4'-0"H x 4 1/2"W - Qty: Two ARTWORKvertical grain
HALFWALL B1-B3 Size: 4'-0"L x 2'-0"H - Qty: ThreeB4-B6 Size: 4'-0"L x 3'-0"H - Qty: Three GRAPHIC WALLCOVERING Size: 3'-7"W x 8'-5"HNotes: Supplied by ISI and Installed by GC"refreshments"
METAL CUT-OUT Size: 5'-0" Long x 7" High COMMUNITY TABLE / DECOR WALL Size: 11-6" Long x 3'-4" Wide x 8'-2" High x 3" Thick Colombian Walnut
E
ABC
D
ITEMS SUPPLIED AND INSTALLED BY INTERIOR SYSTEMS
Anodized Anodized
4 1/2" 4 1/2"
Clear
Corian, Chamois Corian, Chamois
Corian, Chamois Corian, Chamois
CF Stinson, Avant AV121 Espresso CF Stinson, Vista VIS-01 Seville
Black (Men's, Women's, Restrooms)
Stainless Steel Stainless Steel
Nearly Chrome w/ Clear Coat Nearly Chrome w/ Clear Coat Nearly Chrome w/ Clear Coat Nearly Chrome w/ Clear Coat Nearly Chrome w/ Clear Coat Nearly Chrome w/ Clear Coat
Wilsonart, 7943K-07 Colombian Walnut Nevamar, WZ0018T Natural Bamboo
Corian, Chamois
Nearly Chrome w/ Clear Coat Nearly Chrome w/ Clear Coat Chrome Chrome
Modena - CoredModena - Cored Bar Ht.Met - FreestandingMet - Cored BHMet - FreestandingMet - CoredTrashbox - SingleTrashbox - Double
3mm, Doelken Woodtape 3mm, Doelken Woodtape
CF Stinson, Avant AV121 Espresso Metaform II, Canyon Maica, M30301 Mansion Maple Maica, M30301 Mansion Maple Wilsonart, 7943K-07 Colombian Walnut Wilsonart, 7943K-07 Colombian Walnut
Wilsonart, 7943K-07 Colombian Walnut, vertical grain Wilsonart, 7943K-07 Colombian Walnut, vertical grain
SEATINGDECOR ELEMENTS BOOTH - TYPE #1 Style: Seat:Support:SETTEE - TYPE #2 Style: Seat:Support:CHAIR - TYPE #1 Style: Seat:CHAIR - TYPE #1 Style: Seat:Support:CHAIR - TYPE #2 Style:
Seat:CHAIR - TYPE #2 Style: Seat:Support:CABINETRY TABLE TOP - TYPE a Surface:Corner Radius:Support:TABLE TOP - TYPE b Surface:Corner Radius:Support:TRASH UNIT - TYPE #1 Style: Unit:Trayslide:Trayst
ops:Corner Guards:TRASH UNIT - TYPE #1 Style: Unit:Trayslide:Traystops:Corner Guards:SIGNAGE SIGNAGE
Backpad:Frame:Backpad:Frame:Footrest:Frame:Footrest:Frame:Edge:Edge:Lettering:Background:Backer:
TUSN
TU2
586-3434
N/A
80517
10128
10/18/10 JON RYAN
RDS, TD, DP
BOB LUTHER
TERAH DeFORE
STEVE ST. JOHN
40914
National Number
501 BIG THOMPSON AVE.
TD, DPFINAL PLAN SET CREATED. TRASH UNIT CHANGED TO "TRASHBOX"11/4/101 GC Specifications
Phone Number: 970-
ESTES PARK, CO
DateDescriptionByRev
Date.Drawn By.Designer.Project Manager.Account Executive.Location.Contact.
Job.Sheet Title.Scale.Sheet.
Unit & Doors
7943K-07 Colombian Walnut, vertical grainTop, Stainless Steel, Existing to Remain
7943K-07 Colombian Walnut, vertical grain
Main TileGroutSolid SurfaceExisting to RemainSolid SurfaceRMHC Signature Art Piece2 Panel Branding Kit w/ POP frames
Wilsonart
Metal Trim
4"
Local Dist
Schluter Systems, Earl Maicus
Eurowest, Jan Deter Laticrete Dupont Dupont Olympus Flag & Banner 800.60.DTHRU
GFX International Inc.
714.309.9551
800.243.4788 800.441.7515 800.441.7515 800.558.9620800.267.0817 ext.3410
Iris-US, Brush Stroke Oyster Stroke #18 Sauterne Corian, Chamois Corian, Chamois Gray 410 (Plaque Part#RMHPLAQGR) Coffee #103
Brushed Stainless Steel
Quadec, EB
12" x 24" 1/2" Thick w/ 1/2" overhang 16" x 16"
Series:Size:MISCELLANEOUS FINISHES SERVICE COUNTER a). Description: Unit Color: Door Color: Contact: Phone:Size:Size:CBB GRAPHICCORNER GUARD
KITCHEN / MENU BOARD TILE Description: Color:Contact:Phone: Description: Color:Contact:Phone:Description: Fascia Size:Color:Contact:Phone:BEVERAGE CENTER b). Description: RESTROOM VANITY
Description: HALFWALL TOPCAP Description: Color:Contact:Phone:RMHC PLAQUE Description: Color:Contact:Phone:Notes: Coordinate purchase with ownerDescription: Color:ContactContact:Notes:
Coordinate purchase with owner
Note: To be used at all tile corners.
Description: Item: Finish: Contact: Phone:
41
42434546
354447
45904590
Main WallcoveringLaminated Accent Wall FinishDoorFrame, PaintedMain Floor TileBase Tile
Cove Base Trim
Solid SurfaceGroutExisting to RemainSpecifications per OwnerMain TileGrout
MDC Wallcovering, Kathy Kennedy Wilsonart Wisonart Benjamin Moore Daltile, Todd Jahnz Daltile, Todd Jahnz Schluter Systems
Metal TrimExisting Wall Trim, Refinish
(262) 781-(262) 781-(800) 472.4588
CH'I
800.621.4006 Local Dist Local Dist Local Dist.
ALPHA4054/4541 (1157-CI Sesame) 7943K-07 Colombian Walnut, horizontal grain Laminate 7943K-07 Colombian Walnut, vertical grain Semi-gloss enamel 2114-10 Bittersweet Chocolate Concrete
Connection CN94 Eastside Brown Concrete Connection CN94 Eastside Brown Brushed Stainless Steel
DupontSchluter Systems, Earl MaicusBenjamin Moore DILEX-EHK Laticrete Eurowest, Jan Deter Laticrete
13" x 13" 3" x 13" Bullnose
714.309.9551
800.441.7515800.267.0817 ext.3410Local Dist 800.243.4788 800.243.4788
Iris-US, Brush Stroke
Corian, ChamoisBrushed Stainless SteelSemi-gloss2114-10 Bittersweet Chocolate #35 Mocha Beige Stroke #81 Buttercream
Rondec-EB
1/2" Thick 12" x 24"
ITEMS BY OWNER / GENERAL CONTRACTOR
WALL FINISH Pattern: Color: Contact: Phone: Color: Contact: Phone: Notes: G.C. to use H-channels/J-channels as connection system for laminated panels
WINDOW SILLS Size: Finish: Color: Contact: Phone: Notes: G.C. to apply black kickplate on door Finish: Color: Contact: Phone:WALL TRIM TILEWORK
Series: Color: Size: Contact: Phone: Series: Color: Size: Contact: Phone: Item: Finish: Contact: Notes: To be used if required
by local codes SERVICE COUNTER FACE TILE Series:Size:
a). Description: b). Description: Description: Color:Contact:Phone:KITCHEN & RESTROOM DOORS a). Description: b). Description: CHAIR RAILFLOOR TILE a). Description: b). Description: c).
Description: Description: Color:Contact:Phone:RESTROOM WALLS Description: Description: BEVERAGE CENTER / WAINSCOTTING TILE Description: Color:Contact:Phone: Description: Color:Contact:Phone:
Note: To be used where tile meets wall finish. Phone:
Description: Item: Finish: Contact: Phone: Description: Finish: Color: Contact: Phone:
2131
22232425323334
)
e
s
a
B
4
6830
2
-
U
G
(
d
e
t
s
a
l
l
a
B
-
f
l
e
S
48484848
SS
LL
FF
28312-BS-ORG LOP-OO-218CFL-BS
CC
Main Ceiling TileAccent Ceiling Tile, #
Track, Exposed Tee System Track, Suprafine Exposed Tee System
Security LightingSecurity Lighting
WW
Brushed Steel / Orange Glass
Existing to RemainPaintN/AMaxi PendantOval Pendant
Armstrong Armstrong Armstrong Armstrong
88
Low Irr. Specular Clear ReflectorWhite Painted Reflector Acrylic Lens
877-Armstrong 877-Armstrong 877-Armstrong 877-Armstrong 1
1
Cortega w/ Tegular Edge White White Woodworks Tegular Unperforated Natural Variations Beech Silver Satin (SA)
))
Benjamin Moore(800) 544-(800) 544- Access / Security Lighting Systems Security Lighting Systems
24" x 24" 15/16" 24" x 24" 9/16"
12
((
Local Dist 800.544.4848 800.544.4848
Semi-gloss 2114-10 Bittersweet Chocolate White Interior/White Exterior
26W Quad Tube G24q-3 Electronic, 120V26W Quad Tube G24q-3 Electronic, 120V
D4226E120 / 4498W (8" Dia.) Compact Fluorescent Quad TubeD4226E120 / 4470W (8" Dia.) Compact Fluorescent Quad Tube
5.5"Dia x 9"H 41"Dia x 14"H x 18"W
Size: Finish: Color: Contact: Phone: Description: Size: Color: Contact: Phone: Size: Finish: Color: Contact: Phone: Description:
Size: Color: Contact: Phone:SOFFIT & BULKHEAD FINISH
CEILING FINISHESWALL FINISHESTILEWORK CEILING TILE/TRACK a). Description: b). Description: RESTROOM CEILING Description: Description: Finish:Color:Contact:Phone:DOWNLIGHTSLIGHT BULBS
Description: PENDANT LIGHTS Description: Product Number:Finish/Glass:Size:Contact:Phone:Notes:PENDANT LIGHTS Description: Product Number:Finish:Size:Contact:Phone:Notes:
LIGHTING
Item: Bulb:Item: Bulb:
Manufacturer: Trim Color: Contact: DOWNLIGHTS @ SERVICE AREA Manufacturer: Trim Color: Contact:
1
23
11
121315
14