Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
DOCUMENT Fire Alarm System 3501 Fall River Rd
April 21, 2008 Della Terra Mountain Chateau 011 • w 11111111111111111111111 • • `( 3501 Fall River Road Estes Park, CO. 80517 C.R. ALARM SYSTEMS, LLC ISAAC E. THOMPSON NICET 114246 FIRE ALARM SYSTEMS, LEVEL III 7-1 Information Sheet for Cover Drawing, 1116 1111111111111111111111 • • 010 ) • Job Number Job Name Add ress Total Sq ft.. City Reg. # Building Height misc Buildin Information County Larimer Della Terra Mountain Chateau 3501 Fall River Road Estes Park, CO. 80517 40' 22,143 Occupancy Class Occupancy Load Inspect Dep Phone Valuation Sprinkled (970) 577-0900 Yes A-2/A-3/R-1 Mixed 509 # of Stories 2 w/ Basement Type of Construction Type V-B 55 Name Add ress Telephone # Owner Information Della Terra Mountain Chateau 3501 Fall River Road Estes Park, CO. 80517 Addition Info Name Add ress Telephone # Architect Information Architecture West, LLC 4710 South College Avenue Fort Collins, CO. 80525 (970) 207-0424 Addition Info Name Address Telephone # Electrical Engineer Information APS, Inc. 7726 Park Ridge Circle Fort Collins, CO. 80528 (970) 206-0269 Addition Info ...................................... Name Address Telephone # General Contractor Information Hill Country Custom Homes, Inc. Post Office Box 271218 Fort Collins, CO. 80527 (970) 493-5639 Addition Info Name Address Telephone # Fire Alarm Designer Information C.R. Alarm Systems LLC 921 13th Ave. Greeley, CO.. 80631 (970) 353-2618 Addition Info Fire Alarm Contractor Name Security & Sound Design; Inc. Address 700 Automation Drive Unit J Windsor, CO. 80550 Telephone # (970) 686-1040 Addition Info Authority Having Jurisdiction Name Estes Park Fire Department Address 901 North Saint Vrain Estes Park, CO. 80517 Telephone # (970) 577-0900 Addition Info CI 1W ill 1111111 11111111111111111 ust ip • i 111 uer FIRE ALARM SYSTEM RECORD OF COMPLETION To be completed by the system installation contractor at the time of system acceptance and approval 1. PROTECTED PROPERTY INFORMATION Name of property: Della Terra Mountain Chateau Address: 3501 Fall River Road, Estes Park, CO. 80517 Description of Property. Bed and Breakfast Occupancy Type: Class A-2/A-3/R-1 Mixed Name of property representative Hill Country Custom Homes, Inc. Address: Post Office Box 271218 Fort Collins, CO. 80527 Phone: (970) 493-5639 Fax: Email: Authority having jurisdiction over this property: Phone: (970) 577-0900 Fax: Estes Park Fire Department Email: 2. FIRE ALARM SYSTEM INSTALLATION, SERVICE, AND TESTING INFORMATION Installation contractor for this equipment: Security 8s Sound Designs, Inc. Address: 700 Automation Drive Unit J, Windsor, CO. 80550 Phone: (970) 686-1040 F'ax Email: Service organization for this equipment: Security & Sound Designs, Inc. Address:. 700 Automation Drive Unit J, Windsor, CO. 80550 Phone: (970) 686-1040 Far Email: Location of as -built drawings: Job Site/Fire Dept Location of historical test reports' Job Site Contracted testing equipment Security & Sound Designs, Inc. Address: 700 Automation Drive Unit J, Windsor, CO. 80550 Phone: (970) 686-1040 tax Email: Contract expires: Apr-09 Cont,-am Number: Frequency of routine inspections: Yearly 3. TYPE OF FIRE ALARM SYSTEM OR SERVICE NFPA 72 Chapter Reference of System Type: Chapters 6 & 8 Name of organization recernving Mann signals with phone numbers (if applicable): Alarm: Central Security Communications Inc. Phone: Supervisory: Central Security Communications Inc. Phone: Trouble: Central Security Communications Inc. Phone: (970) 352-3662 (970) 352-3662 (970) 352-3662 Entity to %%loi°t7 al:omti:rro iriumrmzwi Centr&2 Security Communications Inc. Phone: (970) 352-3662 Method of retraninissien of ;I rrma to uh it organization or location: Phone If Chaplet' 8, note tie means of aii:tat::suou t"ru a the protected premises to the central station: nI Multiplex 2-way radio If Chapter 9, note the hype aconite, , i „ �� tit o8I Local Energy Shunt N/A 1-way radio nN/A 3.1 System Software Operating system fexecutrve so v ire r •a „(ou1 mevel: Version 3.4 Site-specd:c softy, AI c revision cq,,,c° Sep-06 Revision completed by: Firelite 4. SIGNALING LINE CIRCUITS Characteristics of rartalating hire :°Jat° s m i dtr^d to this system (see NFPA 72, Table 6 6.1): QuantoN 36 r:' {r:. 1 Class: B .,1111111111111111111111111111111 0110 thal 1000 00, 6 5. ALARM -INITIATING DEVICES AND CIRCUITS Character sites of trtitiatirtg devices, circuits connected to this system (see NFPA 72, Table 6.5): Quantity: Style: Class: 5.1 Manual Initiating Devices 5.1.1 Maunual Pull Stations Types of devicesr X Acldressab 5.2 Automatic Initiating Device 5.2.1 Area Smoke Detectors Type of coverage: X Complete Area Types of devices: X Addressable Type of smoke detector sensing technology: 5.2.2 Duct Smoke Detectors Type of coverage: nventional Number of manual pull stations: 2 Coded []Transmitter N/A Number of smoke detectors: Partial Area Nonrequired partial area 26 Conventional Coded []Transmitter Ionization []Photoelectric N/A Number of duct smoke detectors: N/A Types of devices: Add! essah+ Type of smoke clew( to; sensing tee' 5.2.3 Heat Detectors Type of coverage: Complex e Types of devices: Addressable X 5.2.4 Sprinkler Waterflow Detectors Types of dcvir s X Acldressah;<. 5.2.5 Alarm Verification Alarm vex .A it -anon n-rr J:a sts ern c, ,ventional I (Coded I (Transmitter I IN/A Ionization Photoelectric Partial Area Conventional onventional hied Number of heat detectors: Nonrequired partial area Coded []Transmitter Number of waterflow detectors: Coded []Transmitter 4 N/A N/A 1 N/A Number of devices subject to alarm verification. Disabled Set for seconds 6. SUPERVISORY SIGNAL-INITIA "TING DEVICES AND CIRCUITS 6.1 Sprinkler System Number of valve supervisory switches: 2 Types of devices: X AddressabI,. I�Conventional []Cocled []Transmitter N/A 6.2 Fire Pump Type of NAx e pump Type of fire pump schc^i�isos tfetri Fire Pump Functions, Swtn:r ves, Fire pump po„E•t i1°:":a:. Engine oe cent! panel tra;7. Other.. 6.3 Engine -Driven Generator" Type of gera :ate' sra i a a. so, a deviv. a , []Engine or" conuiarl panel trta,ri Other c ssabYe Diesel t"anwenuonal []Coded []Transmitter []N/A Fire pump phase level []Selector switch not in auto t irlressable 71t;:onventionai []Coded ITTransmitter N/A c ra r+erator running []Selector switch not in auto ILo it Fuel 116 4661 611( 4161 • • 6 �dJ M 11111111111111111111 I/f DN 7. ANNUNCIATORS- 7.1 Annunciator 1 Type: nActdrc'ssable X Lot 7.2 Annunciator 2 nLocal Type: Addressable 7.3 Annunciator 3 TyPc: Addressable Lo a riRemote lair( Cory nGraphic nN/A Location: Reception nRemote Directory nGraphic nN/A Location: Remote Graphic nN/A Location: 8. ALARM NOTIFICATION DEVI: "➢'`;S AND CIRCUITS 8.1 Emergency Voice Alarm Se c vice Number of single voice alarm channu^' Number of speakers: 8.2 Telephone Jacks Number of telcphon, acl:s installed Type of telephone docks installer.: 8.3 Nonvoice Audible Systy nts. Characteristics of notification cb r__ Quanta 41 x Number of multiple voice alarm channels: Number of speaker zones: 2 Number of telephone handsets stored on site: Electric powered nSound powered nN/A 0 oected to this system (NFPA 72, Table 6.5): I.e. Y Class: 8.4 Types and quanties fo Nonvolce Appliances Installed Bells: With visual clevic Chimes: With visual device: 19. EMERGE CY C r::b NTROL 'f'" l d N Hold -Open Door Releasing Door Unlocking 10. SYSTEM POWER SUPPLY 10.1 Primary Power Normal voltage Horns. 69 With visual device: Bells: With visual device: 'l"IONS ACTIVATED Smoke Management or Smoke Control Elevator Recall °,,r )VAC X 9 Overcurrent protecr,'oon: Type Location (of pi iina1 v supple parte,lh,ori Disconi eoauog menu s locrurol 10.2 Secondary Power Location: Fire Panel Number of standby batteries: Location of crmerge icy generator Location ol° fuel stria age: Calculared capacirof second t i x„vc,r it i+rr In stancldit mode' 0.2389 Circuit Breaker Amps Amps Fire Panel Room 20 CKT Breaker Battery Normal Voltage 24VDC Current rating 24VDC Amp hour rating: 7.5 he system In alarm mode. 0.464 Q)I taiti 110 010 0,0 NO. ilk u rd C 11. RECORD OF INSTALLATION Fill out ajtt'r all installation is complete and tuning has been checked for opens, shorts, ground faults, and improper branching, but bcfor4: conducting operational acceptance tests. The system has beers installed in ac, ;>rd:anca: a ith the following NFPA standards: (Note any or all that apply) NFPA t s I x NFPA 70, National Electric Code, Article 760 Manulartutctpublished tri u,rti if Other (please specify): x x System tic ration from releret +. .• t;nxlards= NONE Signed: I'„rated Name: Date: Organization: Security & Sound Designs Title: Phone: (970) 686-1040 12. RECORD OF SYSTEM OPERATION All operatio,i fcaturei, and functions ai this stem were tested by or in the presence of the signer shown below, on the date shown trddnw, and were •-id rat b • operating properly in accordance with the requirements of: NFPA r' I i NFPA 70, National Electric Code, Article 760 Manufacturer's aiublishccl Other (please specify): Documentation in arrorda i • r u fir 'ion and Testing Form (Figure 10.6.2.3) is attached x x x Signed: Organizat ion: hinted Name: Title: Date: Phone: (970) 686-1040 13. CERTIFICATE AND APPROVALS 13.1 System Installation Contractor This sysu•irr spec r's,•%I herein¢ h:r r t rl(cr9 au ci tested according to all NFPA standards cited herein. Signed. ,Ltecl Name: Organization: Security & So rc.i L`.r sxf,ruts 'C'itic: Date: Phone: (970) 686-1040 13.2 System Service Contror This sy stem ay, spec.na i herein ro.toJ id tuncl tested according to all NFPA standards cited herein. Signed: Printed Name: Date: Organization. Security & So Designs "Title: Phone: (970) 686-1040 13.3 Central Station This system as sp •cified lu^6 c'i,, p,n, torred according to all NFPA standards cited herein. Signed: Organization: Security & Sou::„ t• nCt:d Name: sit u:;t "1'rtfr Date: Phone: (970) 686-1040 13.4 Property Representatzv :• I accepr Onus scstetr. ran have),; bees �,�:Iro a tl tar,yqed to its specifications and all NFPA standards cited herein, Signed Organizrutton• 13.5 Authority Having Jtas rf t tz,uu 1 have witnessed <r :i,4uu.isfactor} f this system and find it to be installed and operating properly in accord,.he with a specifications, its approved sequence of operations. and with ail& NFPA :.[auuuc9 ar riu u:u r ted Name: Date: title: Phone: Signed, 1,'rtcd Name: Date:. Organizal. trnent Tit Phone: (970) 577-0900 Aott k spars Par➢c lure lra r r p__.. 11i 110 l�l U� coogkc 11111111111111111 101 Doi IV • I Sequence of Operations Matra System Outputs = CI ��, ♦ •� � r/ r•� �• � �p 04 s: . SYSTEM INPUTS 1 All Smoke Detectors zn .0 .J-1 f.n a� 1 I) .0 rO-1 I.n G e> CA ISmoke Det. in Elevator Lobby (1st Fl) Smoke Det. in Elevator Equipment Rm All Heat Detectors All Manual Pull Stations All Sprinkler Waterflow Zones All Sprinkler Tamper Devices Ansul System Ground Fault U - C c 5 o z Low Batters - 0 0 Telephone Line Fault Elevator Shunt Trip M %O h 00 y .; ,,,,.„ , ,* ,,,o) 16 • ,* /, i ' . " '. A • • F . ON E. cy •: z n�I z �•, •pi ,♦` . ©Y v b h 00 Q\ ""' Pi I v�1 ..1 NIT .y ..1 I .y b .y h 1.1 00 ..4 ON ..1 • 00!00! : Job: Della Terra Mountain Chateau Address: 3501 Fall River Road, Estes Park, 8051'/1 W•W :e C el Z w z N. in W � W :: 'All Smoke Detectors Smoke Det. in Elev Lobby (BSMT) !Smoke Det- in E1ey Lobby (Main Fl) Smoke Det, in Elev Lobby (Upper Fl) Smoke Det. in Elevator Eq Rm All Heat Detectors 2a• y s All Sprinkler Tamper Devices Ansul System ®, Notification Appliance Short Circuit a °' AC Power Failure Telephone Line Fault 1 Elevator Shunt Trip wl lH M ~ M T.4 l‘O t l00l O\ C.,NM`' 41bh00 O\ N',, • 4)11111 )1i111, 1111111111111111, IND $ kJ/ 110 11 I ( ' 4 0 z .g 1.‘ 00 7 1 -0 g a 11 5 A 72 5-2.4.1$ E 1-5 is 0 g 41 a 5: N , E g E = a 4. d.3 7; fi 2 g 7; -5 g -0 a. OA .4 a r. rn 2 1,17 g 4, E g _ 41 -o „Ts -g 5 41 5 5, A 5 -t1 E -111 E 4 5 0 1 Z T" g -11 z .0 0 41 -P 5 2 5 41 7 P.. s v.) OD 0, 110 111 411 • • 4110 of I NAME: Della Terra 1\1ountain Chateau NOTIFICATION kPPLIANCE WIRE RUNS Item CIRCUIT #I- Basement CIRCUIT #2- Main Floor Location Description Distance Peet ltem Location Description Distance Feet 1 Strobe I5cd 2 Mini Sounder 3 Mini Sounder 4 Strobe I5cd 5 Strobe I5cd 6 Horn/Strobe 75cd 7 Strobe I 5cd 8 Horn/Strobe 75cd 75 25 25 D 50 1 Born/Strobe 75cd 2 Mini Sounder 3 Mini Sounder 4 Strobe I5cd 5 Horn/Strobe 15cd 6 Strobe I5cd 7 I torn/Strobe 30cd 50 25 25 25 25 25 50 8 I'lorn/Strobe 30cd 50 9 Mini Sounder 50 10 Mini Sounder 25 11 Horn/Strobe 75cd I2 Horn/Strobe I5cd 13 ,Horn Strobe Sued 14 WHorn/Strobe I 5cd r 15 Horn/Strobe 30cd Total. Item 1 CIRCt;' FI' #3- Upper Floor 25 50 25 2 45 Location Dist:nce Description l eet Mini Sounder 2 Mini Sounder 3 Horn/Strobe 3t)cd 4 Strobe 15cd 5 6 7 8 Horn/Strobe 75c Horn/Strobe 3tiec Mini Sounder Mini Sounder 9 10 Horn/Strobe 7'7ed Strobe I5eci ._ 1I Strobe 15cd 13 14 25 25 7y 9 1 lore/Strobe 30cd 25 10 Mini Sounder 25 II Horn/Strobe I5cd 25 12 11 loin/Strobe 75cd 13 1,1 lore/Strobe 75cd 75 75 14 5 Total 500 CIRCUIT #4- Wedding Room Item! Location Distance Description Feet I ; Strobe 15cd 50 Strobe 15cd 25 I Zorn/Stroke 30cd 25 4 1lorn/Strobe 75cd 50 Horn/Strobe 75cd 6 IHorn/Strobe 75cd 7 "horn/Strobe 75cd 8 10 I Strobe 15eci d 2 5 12 Horn/Strobe Tied Mini Sounder 15 Mini Sounder Tota I 3 50 50 50 Total 300 )j 011 .III IIVIrh t► 1111111 III If 14.1 ra 5 11 P4 � o G, Lo. A cu • es 4 o 40 z � w z O F d F 7 0 00 0 N 0 ' OS 01 01 b0 00 -I - O 10 al at N 0 i r.+ Co)04 04 IC C os 0 CC O 1 CU VD P z L u 0 A a3 0 0io CO .�1 0 Ey 00 mn 0\ cn N 0 1/40 1/40 0 rM kn 01 00 fr) N fn 00 fn N 00 n cn 0 N kn N O 0 00 fr) N 00 N fr) 0 N O V1 O r 0 0 0 0 0 0 0 0 0 \D N 00 er et O O\ VD M O r lin 10 00 10 M --� N d. \D \D 10 o0 O' O O O O O O O O O O O N N 0 10 10 O Cr) 00 N O N O mn N 0 N fool 0\ O N mn O 1/40 1/40 O 00 N N 00 00 1-- 1-- 0\ 0 0\ O O M In N 0 O a 00 O 00 0; n 0\ O re) M 0 1/40 0 kn 0 0 N 0.4 N 00 01 0\ VD 10 7 0\ 01 00 O V1 O 00 Cr) O\ 0; .--i \D 1/40 \D 0\ 0\ N N 10; 7 \D Cr) In 00 .4444 01 In 7 -y O 0 0 1/40 0 0 CO 01 00 00 01 00 Cr) 0\ Cr) 0\ ,n Cr) 00 0 00 O O O 1/40' N O O 0 n 0\ 1/40 01 VD N 0; 00 vD \D 00 ,-y O 1/40 kn r Cr, cn 00 00 O VD in N O 1/410 N O 10 0\ -n 7 00 0\ 00 7 N N 00 O O 00 r 00 r 00 Cr) Cr;1/40 O O 00 'n N O O O N M In N N N 'n 0\ 0\ r r 00 VD 0\ fn r N 7 'n 'n N O 00 In O 0\ N O a Horn/Strobe 15cd 0 0 0 0 0 N N N N M M M M Cr) NIN el Cl n VD VD 4 4 kn N O N O Horn/Strobe 30cd s) 0\ N O 0; cn r 00 0 1/40 1/40 00 N r ON O 7 0 O 01 O O 0\ Cr) n 00 0\ N 00 \D Cr) 4' ON O O O 0 vo P 00 0\ N 0 0 Cr; M r 00 0\ N 00 \D Cr) VD 0\ 0 O O 0\ 0\ N O O 0; re) 00 0\ N \0 00 1/40 -.y vD 01 0 -17 -~-4 O O 0\ O M a\. O O 0\ - Ir wsl 00 rl o\ 00 1/40 1- 1- er 0 'a, e .-i 1 c7N et) wl dl m41 'I' • • 1101111111)))) 0,10 • Project Information: DESIGN, INC. Della Terra Mountain Chateau CO. Zip: 80517 April 18, 2008 Source Voltage: 20.4 voltage ar Each Device Total 20.3646 20.3778 I 0.1760 20.3418 20.3635 I 0.1930 20.3156 20.3471 I 0.2100 20.2613 20.3131 I 0.2760 20.1859 20.2658 I 0.3550 20.1038 20.2143 I 0.4210 19.9224 20.1006 I 0.5280 19.6980 19.9599 0.6350 19.5051 19.8390 0.7420 19.4084 19.7784 I 0.7590 19.2209 19.6609 I 0.8380 18.6676 19.3140 1 1.0140 18.0081 18.9006 1.1900 18.0081 18.9006 I 1.1900 18.0081 18.9006 I 1.1900 18.0081 18.9006 I 1.1900 18.0081 18.9006 I 1.1900 18.0081 18.9006 I 1.1900 18.0081 18.9006 1.1900 18.0081 18.9006 1.1900 18.0081 18.9006 1.1900 State: Date: aS bA ` 1 20.3439 20.3076 20.2660 ON O� •-•ij O N 20.0603 19.9300 -i N d VD O1 19.2859 18.9798 N �O N 00 00 .-r 18.5287 V1 O 4.1'0 VD t ,•I O\ l M 'VD �O .-r r 16.6039 1 O\ m !O %.O .O , -n O\ M 0 %.O .O — .. O\ m O VO I'0 , ,•I .... ON M O VD �0 �- •I O\ M O VD 'O .-r _ O\ M O ,.0 l0 �.n► O\ M O '..0 'O 3501 Fall River Road City: 1 Estes Park C.R. Alarm Systems LLC rl 0 U - - - 20.0495 OO1 19.6515 19.1930 18.6258 18.1384 ',,,I M 00H1-- - --147.371171 14.3548 I 14.3548 I o0 M 00 M 14.3548 00 M 14.3548 14.3548 Minimun Operating Voltage .. �IIII _i 20.2578 1 20.0606 19.8425 19.5395 19.2094 18.4802 17.5781 16.8028 16.4137 M VD %.O 13.4358 10.7848 10.7848 10.7848 10.7848 10.7848 10.7848 10.7848 I 10.7848 10.7848 u, 0 r .45 A Total x 2 - 000000 _ O M V1 M V1 d 055 O O �p 650 I O O 850 O 0 O O 0 O O 0 O O 0 O O 0 O O O O O O O 1000 Voltage at the End of Curcuit Between - in intnlin NN on O v1 05 on N 25 in N 75 on t- NAC#2 Main Floor Type: Class B / Style Y Current - 00 — - — 0.0170 0.0660 0.0790 0.0660 0.1070 O SS O .-I O O O ,•I O O n O O 0.0790 0 VD S r.. O I 0.1760 II "41 SR P2R P2R P2R P2R P2R P2R I P2R Device Name 'Horn / Strobe 75cd Mini Sounder Mini Sounder Strobe 15cd Horn / Strobe 15cd Strobe 15cd Horn / Strobe 30cd Horn / Strobe 30cd Horn / Strobe 30cd Mini Sounder Horn / Strobe 15cd Horn / Strobe 75cd Horn / Strobe 75cd III »� 001 11)11 dul1111)10 l II to „Ili IIIIII u1, ; luIII ;ll 1111 K 11 'Address: IPreparded By: Protected Property:I ik .w N M et In �C l� 00 O® O .-1 a-1 ,-I N r-1 M .H I• 4n N 4D 1.•I P' ..1 00 rr Q. rl O N 0 • • • 101 • �1 looloOhllhlop 1111,111,1,1,1 h Project InformationDESIGN, INC. . _ - Protected Property:f Della Terra Mountain Chateau r n00 ci. I April 18, 2008 16 Source Voltage: 20.4 Circuit Voltage (a Each Device Total 18ga 16ga I 14ga I 12ga 1 10ga Current 20.3968 I 0.0170 20.3914 I 0.0340 0 -� o tel to M N 20.3218 I 0.2070 20.2070 I 0.3830 20.0913 I 0.4900 20.0486 I 0.5070 20.0039 I 0.5240 19.8267 I 0.7000 19.7244 I 0.7660 19.6138 I 0.8320 19.4948 I 0.8980 OS00'T I 9£Z£'6T 19.2411 1.0220 19.1563 I 1.0390 19.1563 I 1.0390 19.1563 I 1.0390 19.1563 I 1.0390 19.1563 I 1.0390 19.1563 1.0390 19.1563 1.0390 ON ON cc)M O N 20.3863 o..1 N0 20.2752 , -+ ON O 0 ,•O 10 O� 19.8395 19.7681 19.4855 N M O\ 19.1458 0 ON 00 0 N.O 00 18.5512 18.4160 18.4160 0 `Zr7 00 18.4160 18.4160 18.4160 18.4160 3501 Fall River Road I City: I Estes Park I State: C.R. Alarm Systems LLC I Date: ON — 01 en O N 20.3783 20.2876 20.2019 M -r ,-+ ON O\ .-- 00 .-+ VD 0\ .-1 0 .-+ tel O� .-r t� 0\ M O\ .-+ 18.9486 O\ 00 VS 00 .l 18.4094 18.1083 I "4' t� VS l� ,--I 17.4658 17.2513 .M-- v) N ,--i ,M-i in N l� .--- .M -+ V1 N t� ,...1 17.2513 17.2513 17.2513 O t` 00 M 0 CNI 20.3655 ON 0 N N 0 N 20.0845 t - .-+ N N40 O\ ,--+ in in --+ ' Or .-+ M 00 ON 00 ,--1 18.8028 N.O 00 00 0 00 .-+ ..1 \O VD t� ,--I , -+ 0 1K1 1 N 1 - ,-r in 0 it ts- VD y .-+ d' 0 .O 0 V0 ,-I 15.7274 00 In 00 M V1 .-+ 15.3858 _ 15.3858 15.3858 15.3858 15.3858 15.3858 Minimun Operating Voltage 20.3794 20.3451 1 -+ 001 N CO00 .-r ,-� ,�-+ 01 ,--1 18.4204 18.1469 N.O 0000 t - .-w ‘.O VS .-1 V1 0 \O ,--i 15.3581 M in d' .-+ t` oN M ,--i O ON N ,--+ 12.4246 12.4246 12.4246 12.4246 12.4246 12.4246 12.4246 Distance Total x 2 0ST 0 N 250 300 I 400 VO1 V1,,N.O 10 650 700 750 800 850 001 O\ 950 ON O ON I I 950 _ c Voltage at the End of Curcuit Between SL in N 25 ,n N 0S 0 lin in N 25 25 25 In N 25 in N .n N in N Upper Floor Type: Class B / Style Y Device Name Part � Current 0.0170 0.0170 0 O 0.0660 O O O 0.0170 0.0170 O111 0.0660 0.0660 0.0660 0 0.0170 0.0170 P2R P2R SR (Mini Sounder Mini Sounder Horn / Strobe 30cd Strobe 15cd Horn / Strobe 75cd Horn / Strobe 30cd Mini Sounder Mini Sounder Horn / Strobe 75cd Strobe 15cd Strobe 15cd Strobe 15cd Horn / Strobe 30cd !Mini Sounder Mini Sounder (Address: Preparded By: 1NAC#3 Item �k ,-+ N M et N VO t - 00 CT 10 'i rl N rl M rl N rl VO N t` rl 00 ti ON ti O N 1411111 ,VIII t • 11111111111111111111 mgp Olt • • 00100000000 000 1 Security & Sound DESIGN, INC. Della Terra Mountain Chateau 3501 Fa11 River Road I City: 1 Estes Park State: f CO. I Zip: I 80517 C.R. Alarm Systems LLC Date: April 18, 2008 Minimun Operating Voltage 16 Source Voltage: 20.4 Distance Circuit Voltage (a Each Device Total Between Total x 2 I 18ga 16ga 1 14ga 12ga 10ga I Current 20.3917 1 0.0660 20.3751 1 0.1320 20.3398 1 0.2390 20.2431 1 0.4150 O , -r 01 in O 0 19.9168 I 0.7670 19.6871 1 0.9430 19.6871 I 0.9430 19.6871 1 0.9430 19.6871 1 0.9430 19.6871 I 0.9430 19.6871 I 0.9430 19.6871 I 0.9430 19.6871 1 0.9430 19.6871 I 0.9430 19.6871 I 0.9430 19.6871 1 0.9430 19.6871 I 0.9430 19.6871 I 0.9430 19.6871 0.9430 19.6871 0.9430 20.3665 20.3789 20.3867 20.2994 20.3368 20.3602 20.1572 20.2475 F20.3039 19.7675 20.0028 20.1498 19.1991 19.6459 19.9248 18.4518 19.1766 19.6292 17.5257 18.5951 19.2627 17.5257 j 18.5951 19.2627 17.5257 18.5951 19.2627 17.5257 18.5951 19.2627 17.5257 18.5951 19.2627 17.5257 I 18.5951 19.2627 17.5257 18.5951 19.2627 17.5257 I 18.5951 19.2627 17.5257 18.5951 19.2627 17.5257 I 18.5951 19.2627 17.5257 18.5951 19.2627 17.5257 18.5951 19.2627 17.5257 18.5951 19.2627 17.5257 18.5951 19.2627 17.5257 18.5951 19.2627 Notification Appliance Circuits Project Information: 100 1 20.3467 150 I 20.2400 200 I 20.0138 1001 CAW M of .-+ ch oo .-r 500 I 17.3013 600 I 15.8283 M N OO v ,� 600 15.8283 1 600 I 15.8283 600 I 15.8283 600 1 15.8283 600 15.8283 600 115.8283 M ONO �n r , 600 1 15.8283 600 1 15.8283 600 1 15.8283 M ONO mn —I M ONO mn --i M ONO l ..,' 111111 OOE I OS 50 400 009 0 \O 0 V 600 Voltage at the End of Curcuit o 'n mn N un N 0 mn 0 vl NAC#4 Wedding Room Type: Class B / Style Y j4 Amps 0.0660 0.0660 0 0.1760 0.1760 0.1760 04t1 SR SR P1 aaa a N P2R P2R Device Name Strobe 15cd Strobe 15cd Horn / Strobe 30cd Horn / Strobe 75cd Horn / Strobe 75cd Horn / Strobe 75cd Horn / Strobe 75cd %,17 I Address: Preparded By: Protected Property:) N M V N C WON ® ..... 18 I .�.1 N • oFip Security & Sound DESIGN, INC. Secondary Secondary Non -Alarm Non -Alarm Per Unit 1 Total n (-NI 0 o o (y O N O 0 N o O 0.00030 0.00840 0.00030 0.00120 0.00023 0.00046 0.00039 0.00273 0.00027 0.00135 0.00000 0.00000 0 o 0 0 O O 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.29414 Secondary Secondary Non -Alarm Non -Alarm Per Unit Total Firelite MS-9200 Current Draws amps) 10 hh 0 1,1 o `I • :a0 • 03 00 rs,�E" 0 0.06400 o0000 00000 00000 0.40000 0.00000 0 0 0.17600 0.00000 1 0.64000 %•1 CCI 41 O �E+' 11111 A a aka 0.25500 0.32500 0.02500 0.06400 0.00840 _I 0.00000 0.00120 I 0.00000 0.00046 0.00000 I 0.00273 1_ 0.00000 0.00135 I 0.00000 0.00000 0.40000 0.00000 0.00000 0.00000 ( 0.00000 0.00000 I 0.17600 0.00000 0.00000 0.29414 L 11A11 .10d ' WWI UMW uuury-uoH Saxunaj Siumpj a o F z Quantity x (current draw per device) g Total current draw Protected Pro erty: Della Terra Mountain Chateau 'o at0a i•EAd p.,Zp,io6 In o 0.00030 0.00030 0.00023 0.00039 0.00027 0.00000 oao 000 600 0.00000 Totals Primary Non -Alarm Per Unit � '� w O O V) LCD8OF SD355 H355 N coo O O en All Addressable SUPPLIED SUPPLIED SS P2RK SUPPLIED �r Al Description (All Measurments Expressed m Amps) Fire AlannControl Panel Remote Annunciators Smoke Detectors Heat Detectors Manual Pulls Station Monitor Modules Relay Modules Addressable Devices in Alarm Flow Switches Tamper Switches !Outside Horn/Strobe LAnsul System Description LLAR Measurments Expressed in Amps) El * 1. N en to `O t- oo a 0 -' cN1-4 i i\ib1i F CD 0.62500 0.00840 0.00390 IN co Secondary Non -Alarm Total u G y co zp,00 f4 O _1 0.00030 0.00030 Secondary Non -Alarm Per Unit 0.00000 3.39000 ON l- 0 N N o 4.40300 •C' 1 cd E1 py Date: April 18 Primary Primary Non -Alarm Alarm Total Per Unit 0.32500 0.13560 0.06600 0.01700 0 0 .noon In ni000 0000 0 0 o 0 0 o 0 0 o 0.25500 Primary Non -Alarm Total moo ego 0 0 0 0.00000 Totals Primary Non -Alarm Per Unit FL FCPS-24FS6 1 SS P2R 25 SS SR 1 12 1 Part Description # (All Measurments Expressed in Amps) Protected Property: Della 7 Item Description (AD Measurments Expressed in Amps) a a r L. a 2 IHorn/Strobes 3 Strobes 1 4 Mini Sounders m Systems Confidential cc co 0 11' r • ,1,111111111111111111 #d • • 1101111101111, • Firelite MS-9200 Power Supply Calculations iuwiiu�uu��uni��nmm�iuiimmmuuuuuiuumuuuumiwunonumi�uim��mu��mmumutlnimioioNi�iu�maooum�o�m�iium�uibiunl uuiuioi�iiimmomoioumuioiomiu�o�duti�a��imw�wti�muumu�wu�?awiimuu�wuw�tiu�?mwuuuuumi�u�uu;��uu�uw�woi ti�oi�iim � t � .,, �... ,., .. � W4 W��Nf�Y�f�U91�VWV�IVnIWoJ'��,BIVTSll�9����DU^i�wJwl�4'Vi.M'��IMu�V�m�mmIMMV�u�u�V��ipiuVVu�u�uuuVu�Pom�"��i VVNVtl�W�Vilnq��M�N�N!flulliNUllUNOW�NDIIm��ON�I�U4W,�UNWI�N!yIVW'9NVUV�uPu�N'441VV�u��mll�m�VVVVu@�g�uuilM�I�VVV�u�Vuuffo�w{NJ�V9ka'MOMN�1WUftlUUI!9!VViw,�NBn'@! Project Information Protected Property Della Terra Mountain Chateau Address: Prepared By: Date: April 18, 2008 3501 Fall River Road, Estes Park f CO. I 80517 Tele. C.R. Alarm Systems 9Jade E. 7deirrfeew Tele. (970)353-2618 w4w9N1111111 1 111m n11111111111111111duVUV1utluiu111iutluiumi n 1ugl1II111 ln1D1Wuwp1111il11111111 No MN�11111 MfMwv 11V111111tiN II�u�V1ua @ MUVVVumVi nmw 1 111111111111111111111111111111111111111111111111111uwwwww1111 111111111 111 111 11moouwwmim11111ioullum1111uwi1 111fl11 111iuwu'Vuuwuwiuiuuiwuiu;luNuiui1111uuuwwmuiououououw0i00uoiminlloy1ouiiowoum0001000,duuouluuuuiuwWuiwu!uu1010 00010w00utititi AC Branch Current The amount of AC current that must be supplied by the source to power the Fire Alarm Control Panel: 3 Amps 120VAC Maximum allowable AC Branch current 20Amps 111i a m: u i :tia uiiuu is �:r� uuo�iuu�� luu�uu1� u i �� �� ��� � i r iu''w�u>u:�uu:h :u:::uu uu �awu ui uc�uu:u i iiu mu �u�m:mi ii oiu i i i i uuiouiuuuui ua uuuuaruiuuutersuti:ri�uuu,�iuumuiuuuuuiuuiuuu!uu1 ��l Im ON,LVLV IU,I,IVyIUI�fI�JG���lf VUfIJ101<�III�VN�JVOUVIVuII�IVIUVI!'�' �J�NNw�'��'IVIOIVIVuulllu�p�uH'Jutlutllu�I�Ilu�000fu�0�OpII��IIIIIVVUUIII�UVUu�VVIuuUVIUVfIp�uVUI�I�III����IIf�I�II�IINIIfuVf�ININ6uUu�IVfuVOUVHIIVlll41� Primary Standby Load Current Load on the Primary Power Supply during non -alarm condition: Primary Alarm Load Current Load on the Primary Power Supply during alarm conditions. 0.2941 0.6400 Amps The FL MS-9200 can support up to a max. of 1 amp in Standby. Amps The FL MS-9200 can support up to a max. of 6 amps in alarm.. :uiuiuuuu1,111uanuu:uuuuuuuuuur m111VVVuuuiiVVO ii IV 0 ce a ui�uuuuuiniiu uuiiiui000ui a iiiii uuuuuuu u: uuuu in�iuu:u:u uuuuoi uu uNuu: uu ui i iiu10 u0 11u Uuuuusuuruuu:uu nnuuu�umiuuuuu�: iu��uiuuiuiiuuuiiuuiiuuuuiiuuuiuuuuiu�0iii a uiuiiiuiiiiiii uu uu�ui�uuiiuuuiiiiiuiu�a�uu:uuu:urioiiiuui�u�isuuiuuuuuuuuuuuiiuI,v1uu:u1111,1101,1111,11111,11,Q1,11,11111111111,I,I,I,I,I1,111,11,11,11,11ur:uruuiuuuuuuuiu11111uiuuuiuvlioni1vlvi0i1111uu1111ouoi1101uuuoiiGuu1iuuu11oi01uuuuuoiuuuiouuuiuuiouuuiuuuuuiu111uuiuuiuuiuiuuuiuuivauuuuu��� Secondary Standby Load The amount of power that must be supplied by the batteries during non -alarm conditions: Secondary Alarm Load The amount of power that must be supplied by the batteries during an alarm condition: 0.2941 24 7.3535 0.6400 0.0833 0.0533 Amps x Hours Standby Amp/Hours Amps x Minutes Alarm Amp Hours 5 7.4068 Battery Selection: 12 V / 12Ahr uuuyiyuuumuuuuuiumuw1111uummmWmuuuiumuwmm!rwiuioiim1p1piuiuoiuioiriormruoriiii1111)1,111)1111IIIIIIIIIIIIIII)!1,1 Derate Factor 1.2 8.8882 1 1 1111111111 • 1,1121 i Ia 1111014 • r/o Secondary Standby Load The amount of power that must be supplied by the batteries during non -alarm conditions: Secondary Alarm Load The amount of power that must be supplied by the batteries during an alarm condition: Primary Standby Load (Current Load on the Primary Power Supply during non -alarm condition: Primary Alarm Load Current Load on the Primary Power Supply during alarm conditions. Protected Property Address: Prepared By: DESIGN, Firelite FCPS-24FS6 Power Supply Calculations Project Information Della Terra Mountain Chateau 3501 Fall River Road, Estes Park C.R. Alarm Systems 80517 Date: April 18, 2008 Tele. Tele. (970)353-2618 eU�m�,wumumomv»n wsiumUitimwiwmnmi iimwwumu� iwuiowiiitiii wain_.. i uw�l b mulwyr!!iuu'wuu)IU�ywu um mU Imm�pliUliUlwmimw iwuwAw�iuuaumumwim�Ul�a�walVlww>mim�uswoipw���>'twrrrww��m, '>UWywmpN1im111,111110,,I9:00uwh��a�;wqwiwm��mlmwwulplvlJl�uu�umwro�U�UlwlowwrlwW�mu11,',11111Uwmlow�lr!Uum1mnlumGiumwu�iwmmullimimimimuuovlwomuwmmuu11111u!ms,y1,u,l'wmnoomwiUu11iVwiv1VAVIVAVIVIVIVIVIwmIIwwm�VUuuim1111lu'uu111u111m1immm1mnuni00gnnl011w11111,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,tidmoll1111e1111mluuwouvywwuuwwl AC Branch Current 'The amount of AC current that must be supplied by the source to power the Fire Alarm Control Panel: 3.2 Amps 120VAC Maximum allowable AC Branch current 20Amps wmistilwmawUhtiwUuimmmummmmumllUmopiuloimnpumuruumwuuuUuuiUmwlwmmmimmuuumumuowiuiuUlmUwwmumohstiuwmmlummmmmUUUUImIUUUI1mmUmumumummuuum1imuuium1111ummm1momoUUiumm1momwwiu1nmmUmoillum1ImmmmmmummImuiIimuoim!mmwmmomm1muUugmumumuum1lutiwn1luoU u'iuiummmwmmmimiowimmmum U mimimu iu 1 vU I�llum�uUUNuyuwu'umul!mummum�w��i�lUWUuuio[liViimmmmumumumuumiumUw���wuuV4,1111111)),roNminnnmonmiMmumuuluul'�01,1111,w1,wmmmlm1oogpugiul111111V11UU'o11111,1f1u111.1),wumummo 0.2550 4.4030 Amps The FL FCPS-24FS6 can support up to a max. of 1 amp in Standby. Amps The FL FCPS-24FS6 can support up to a max. of 6 amps in alarm. mm wmmmmUimulmmmpilmmmi mwmmwmmwuwmmmmuu!u1wwmw mmmam?mmmmUmUmoimimmm1Immouuummmml1I1Imrumiquiimmi mm11mwmiuiumiwiw,wommmnnm11mmm inouummummuuuumuuuiUimmwmaaumImommImummuummmiwmmnwiiliimiu w�,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,14 041111111,11111uwmnmm111111111111111111111uw11,1,u�d1wuwv!4110umioi1111io11mimm11111mummmumummmmuwmummoNiimif9imiioiomuouoii11111111111111111111111111111111111,11111111111,11,111,11,1111111u1111uuuu>w'wu1u1Uu1w11111,1,1,V104111mmommmuum' 0.2550 24 6.3750 4.4030 0.0833 0.3669 Amps x Hours Standby Amp/Hours Amps x Minutes 5 Alarm Amp Hours 6.7419 z Derate Factor Battery Selection: 12 V / 12Ahr e 1,wmmwmmw11111111111111111111111111111111miioimmmu61iuumim1imuummmm1im1im1i lnummuUmmm!umououmoiim1oimi101oom1mUpmmommmummmmm1muum1i!IluuuuUNlmu10iim1oim1oiim0Wiuuu1o11111oou01umoumummm1imuuuuuuuuuuuuu1 1.2 8.0903 OF-52422:A • A1-40 fter • 11,111111111111111111 11511111, ,110 • 141 MS-9200UDLS(E) Intelligent Addressable FACP with Built -In Communicator General The Fire-Lite MS-92000DLS is a combination FACP (Fire Alarm Control Panel) and DACT (Digital Alarm Communicator/ Transmitter) all on one circuit board. This compact, cost-effec- tive, intelligent addressable control panel has an extensive list of powerful features. While the MS-92000DLS may be used with an SLC configured in the CLIP (Classic Loop Interface Protocol) mode, it can also operate in LiteSpeed' ' mode—Fire•Lite's latest polling tech- nology —for a quicker device response time. LiteSpeed's pat- ented technology polls 10 devices at a time. This improvement allows a fully -loaded panel with up to 198 devices to report an incident and activate the notification circuits in under 10 sec- onds. With Litespeed polling, devices can be wired on stan- dard twisted, unshielded wire up to a distance of 10,000 feet. (Consult the wire table on page 3 for specific installation instructions.) The MS-92000DLS's quick -remove chassis protects the elec- tronics during construction. The backbox can be installed allowing field wiring to be pulled. When construction is com- pleted, the electronics can be quickly installed with just two bolts. Available accessories indude LED, graphic and LCD annunci- ators, and reverse polarity/city box transmitter. The panel is programmed through the FACP's keypad or via a standard PS-2 computer keyboard, which can be plugged directly into the printed circuit board. This permits easy typing of address labels and other programming information. NOTE: Unless otherwise specified, the term MS-9200ODLS is used in this document to refer to both the MS-92000DLS and the MS-92000DLS(E) FACPs (Fire Alarm Control Panels). Features • On -board DACT. • Four Style Y (Class B) or two Class A (Style Z) NAC cir- cuits. - 6.0 amps total NAC power with optional XRM-24. • Selectable strobe synchronization for System Sensor, Wheelock, and Gentex devices. • Complies with UL 864 9th Edition requirements. • Remote Acknowledge, Silence, Reset and Drill via address- able monitor modules. • Up to 32 ACM Series (ACM-16AT or ACM-32 series) annunciators or LCD-80F remote annunciators via EIA-485. • EIA-232 printer/PC interface (variable baud rate) on main circuit board. • Integral 80-character LCD display with backlighting. • Real-time dock/calendar with automatic daylight savings control. • Detector sensitivity test capability (NFPA 72 compliant). • History file with 1,000-event capacity • Maintenance alert warns when smoke detector dust accu- mulation is excessive. • Automatic device type -code verification.. • One person audible or silent walk test with walk -test log and printout Flr+e•uTemarms by Honeywell ip�o��Mmm immm mm �aw� iuu'�" p • Point trouble identification. • Waterflow (nonsilenceable) selection per monitor point. • System alarm verification selection per detector point. • PAS (Positive Alarm Sequence) and presignal delay per point (NFPA 72 compliant). SLC LOOP: • SLC can be configured for NFPA Style 4, 6, or 7 operation, SLC supports up to 198 addressable devices per loop (99 detectors and 99 monitor, control, or relay modules). SLC loop maximum length 10,000 ft. (3,000 m.). See wire table on page 3. NOTIFICATION APPLIANCE CIRCUITS (NACS): • Four onboard NACs with additional NAC capability using output control modules (CMF-300 or CMF-300.6). • Silence Inhibit and Auto Silence timer options. • Continuous, March Time, Temporal or California code for main circuit board NACs with two -stage capability. • Selectable strobe synchronization per NAC. • 2.5 amps maximum per each NAC circuit. NOTE: Maximum or total 24VDC system power shared between all NAC circuits and auxiliary power outputs is 3.6 amps PROGRAMMING AND SOFTWARE: • • Autoprogram (learn mode) reduces installation time. Custom English labels (per point) may be manually entered or selected from an internal library file. Two programmable Form-C relay outputs. 99 software zones. mniHme m umuu ioarmuounwmrn!wmuomeureu a wiwwrwmAuuuuuim rsra umuo rmguumtmumig mxrmrm imnuwmmunmm ,mms amNmimmxtimunm iuuimuummssumuwum omu varmunuriwxsmmmur ruamu mnommutiuuurimuui gmammmiauummmsmm0mmmmonvhmmilwumursxim„wumiu'sm9m srurrr iumriuwom DF-52422 A • 06/29/07 Page 1 of 4 drik, • • 1.0 1,10 (111 • 1111111111111111111111111, 11111111111111111111. • Continuous fire protection during online programming at the front panel. • Program Check automatically catches common errors not linked to any zone or input point. User interface LED INDICATORS • AC POWER (green) • FIRE ALARM (red) • SUPERVISORY (yellow) • ALARM SILENCED (yellow) • SYSTEM TROUBLE (yellow) • MAINTENANCE/PRESIGNAL (yellow) • DISABLED (yellow) • BATTERY FAULT (yellow) • GROUND FAULT (yellow) KEYPAD CONTROLS • ACKNOWLEDGE/STEP • ALARM SILENCE • DRILL • SYSTEM RESET (lamp test) • 16-key alpha -numeric pad (similar to telephone keypad) • 4 cursor keys • ENTER Ordering Options MS-92000DLS(E): 198-point addressable Fire Alarm Control Panel, one SLC loop. Includes 80-character LCD display, sin- gle printed circuit board mounted on chassis, and cabinet 4XTMF Reverse Polarity Transmitter Module: Provides supervised output for local energy municipal box transmitter, alarm, and trouble. DP-9692: Optional dress panel for MS-92000DLS. TR-CE: Trim Ring for semi -flush mounting. BB-26: Battery backbox, holds up to two 25 AH batteries and CHG-75. BB-55F: Battery box, houses two 55 AH batteries. CHG-75: Battery charger for lead -acid batteries with a rating of 25 to 75 AH. CHG-120F: Remote battery charging system for lead -acid batteries with a rating of 55 to 120 AH, Requires additional BB- 55F for mounting. BAT Series: Batteries, see data sheet DF-52397. XRM-24(E): Optional transformer. Increases system power to 6.0 amps. Use XRM-24E with MS-92000DLS(E). PRTIPK-CABLE: Cable printer/personal computer interface cable. PRN-6F: UL listed compatible event printer. Uses tractor -fed paper. COMPATIBLE ANNUNCIATORS ACM-8RF: Relay module provides 8 Form-C 5.0 amp relays. ACS-LED Zone Series: LED -type fire annunciators capable of providing up to 99 software zones of annunciation. Available in increments of 16 or 32 points to meet a variety of applica- tions. LDM Graphic Series: Lamp Driver Module series for use with custom graphic annunciators. LCD-80F (Liquid Crystal Display) point annunciator: 80-character, backlit LCD-type fire annunciators capable of displaying English -language text. NOTE: For more information on Compatible Annunciators for use with the MS-9200UDLS, see the following data sheets (document numbers) ACM-BRFACM-8R (DF-51555), ACS/ACMSeries (DF- 52378), LDM Series (DF-51384), LCD-80F (DF-52185). LITESPEED COMPATIBLE ADDRESSABLE DEVICES All feature a polling LED and rotary switches for addressing. CP355: Addressable low -profile ionization smoke detector. SD355: Addressable low -profile photoelectric smoke detector. SD355T: Addressable low -profile photoelectric smoke detec- tor with thermal sensor. H355: Fast -response, low -profile heat detector. H355R: Fast -response, low -profile heat detector with rate -of - rise option. AD355: Low -profile, intelligent, "Adapt" multi -sensor detector (B350LP base included). CUP MODE ONLY BEAM355: Intelligent beam smoke detector. BEAM355S: Intelligent beam smoke detector with integral sensitivity test. D350PL: Photoelectric low -flow duct smoke detector. D35ORPL: Photoelectric low -flow duct smoke detector with relay option. MMF•300: Addressable Monitor Module for one zone of nor- mally -open dry -contact initiating devices. Mounts in standard 4.0" (10.16 cm.) box. Includes plastic cover plate and end -of - line resistor. Module may be configured for either a Style B (Class B) or Style D (Class A) IDC. MDF-300: Dual Monitor Module. Same as MMF-300 except it provides two Style B (Class B) only IDCs. MMF-301: Miniature version of MMF-300. Excludes LED and Style D option. Connects with wire pigtails. May mount in device badcbox. MMF-302: Similar to MMF-300, but may monitor up to 20 con- ventional two -wire detectors. Requires resettable 24 VDC power. Consult factory for compatible smoke detectors, CMF-300: Addressable Control Module for one Style Y/Z (Class B/A) zone of supervised polarized Notification Appli- ances. Mounts directly to a 4.0" (10.16 cm.) electrical box. Notification Appliance Circuit option requires external 24 VDC to power notification appliances. CRF-300: Addressable relay module containing two isolated sets of Form-C contacts, which operate as a DPDT switch. Mounts directly to a 4.0" (10.16 cm.) box, surface mount using the SMB500. BG-12LX: Addressable manual pull station with interface module mounted inside. 1300: This module isolates the SLC loop from short circuit conditions (required for Style 6 or 7 operation). SMB500: Used to mount all modules except the MMF-301 and M301. MMF-300-10: Ten -input monitor module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six mod- ules on a CHS-6 chassis in a BB-6F. MMF-302-6: Six -zone interface module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six mod- ules on a CHS-6 chassis in a BB-6F. CMF-300-6: Six -circuit supervised control module. Mount one or two modules in a BB.2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F. I01,110IiAiIIIMEMEiYilul \ 1WIUYWnk'JOIiIIIIIIIwti1riw111111IWWIIII1UINnIllpaml111IIUIIIiIWuNdmXriXlflnmMllW',IlrvpUll111u4VIIVIM1YIM1YIM1YIM1YIIX111NmIIM1YNIIII(XpIINIINmXlkkltnpllNldllMlnn6l111a1ffi111>XtIriXXriFN1WI611ri116VWit11111NIriIN1'rIIPI1NfIN18N@IINIPIWIINIINIMIIINImIMml11i11iII111YA,161YNA1GXrv1Y�1U:`OVUVII14\WYWn1111NN1111111161YXIIhIIIIMlfllllll'sI6ri�XW7X�WAA�14UgUgIWIIXUX flIIIIN1hU11\\\IVItlIITWX111fi111111NIlIIIAlNfi7ilSfiNiNINfiIwYY�mhtivpMlXl>iXVl6"N11YI11riNIIXriXIXWY�%'iWriHll ' Page 2 of 4 -,- DG"-52422. A «. 06/29/07 uiulrilrilwulw�u ww�wMl� l�� uu» ural»m�lu YN o }o}olUu}�ti�YUX riluu 1 010 • • #I+ 1110 vn • 111111111111111111111 • • vitt, CRF-300-6: Six Form-C relay control module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F. NOTE: 1) For more information on Compatible Addressable Devices for use with the MS-92000DLS, see the following data sheets (document numbers): AD355 (DF-52386), BG-12LX (DF- 52013), CMF-300-6 (DF-52365), CRF-300-6 (DF-52374), CMF/ CRF Series (DF-52130), CP355 (DF-52383), D350PL/D35ORPL (DF-52398), H355 Series (DF-52385), 1300 (DF-52389), MMF-300 Series/MDF-300 (DF-52121), MMF-300-10 (DF-52347), MMF- 302-6 (DF-52356), SD355/SD355T (DF-52384). 2) Legacy 300 Series detection devices such as the AD355, CP300/CP350, SD300(7)/SD350(7) and older modules such as the M300, M301, M302, C304, and BG-10LX are not compatible with LiteSpeed polling. If the SLC contains one of these devices, polling must be set for standard CUP protocol. Please consult fac- tory for further information on previous 300 Series devices. Wiring Requirements While shielded wire is not required, it is recommended that all SLC wiring be twisted -pair to minimize the effects of electrical interference. Wire size should be no smaller than 18 AWG (0.78 mm2) and no larger than 12 AWG (3.1 mm2). The wire size depends on the length of the SLC circuit. Use the table below to determine the specific wiring requirements for the SLC. SLC ProtocolOW Wire Requirements Distance n Feet Wire Size Wire Type CLIP Twisted -pair, shielded 10,000 feet(3,048 m) 12 AWG (3.31 mm2) Belden 9583, Genesis 4410, Signal 98230, WPW D999 Twisted -pair, shielded 8,000 feet (2,438 m) 14 AWG (2.08 mm2) Belden 9581, Genesis 4408, Signal 98430, WPW D995 Twisted -pair, shielded 4,875 feet (1,486 m) 16 AWG (1.31 mm2) Beldende98630,957,Genesis PW4406, & 4606, - 1 Twisted -pair, shielded 3,225 feet (983 m) 18 AWG (0.78 mm2) g gldenal 98300, WPW D9752 & 4602, Untwisted, unshielded wire' in or out of conduit 3,000 feet (914 m) 12-18 AWG (3.31 mm -0.821 mm2) SLC Protocol ire remen WRequirements Distance ,n Feet Wire Size Wire Type LlteSpeed Twisted -pair, unshielded 10,000 feet (3,048 m) 12 AWG (3.31 mm2) Non -Plenum (FPLR): Genesis 4315, Belden 5020UL Plenum (FPLP): Genesis 4515, Belden 6020UL Twisted -pair, unshielded 8,000 feet (2,438 m) 14 AWG (2.08 mm2) Non -Plenum (FPLR): Genesis 4313, Belden 5120UL Plenum (FPLP): Genesis 4513, Belden 6120UL Twisted -pair, unshielded 4,875 feet (1,486 m) 16 AWG (1.31 mm2) Non -Plenum (FPLR): Genesis 4311, Belden 5220UL Plenum (FPLP): Genesis 4511, Belden 6220UL Twisted -pair, unshielded 3,225 feet (983 m) 18 AWG (0.821 mm2) Non -Plenum (FPLR): Genesis 4306, Belden 5320UL Plenum (FPLP): Genesis 4506, Belden 6320UL uo E MNUMNMIMMUNNsmMiM 1lkppMlnMIgMNI 4M MS-92000DLS Wire Requirements IM176HMNN6NiM0111PT1YNINENNIN{SN111218101@VPo@1uANp9NPY1lMOW 9 g;YmCyIV1AIDN16110IONOM0llNtl(EMIINNINl`NV2$IN9UNIMININiPNMVINWdYE M111161111111YXIR1101\@111YPINIKdNLN@,NXInNOH11YRPeIIEMIRMMIIDN18N'EINIPoN!EMNIENMMIMftlEht1NI116MM01iM1NITNII N4AMINN EM'HIMWM1FIdVIWOWN&MMpYAkMWVMIRM1N414PoANIMINIAIYNMIXrnIXIXIXINIAIYfvirAtNHd111NIlOFMMINiNlE DF. 52422.A 06/29/07 -_. Page 3 of 4 m 11111111111111111111 111111111111111111 • MI I 1 Ill SYSTEM SPECIFICATIONS alznHussriwNlr System Capacity • Intelligent Signalling Line Circuits 1 • Addressable device capacity 198 • Programmable software zones 99 • Annunciators 32 Electrical Specifications yy " r � lG/� t�ir��r/oi i i �� iRr �ii/r/' / r �i ��a � MS9 � t , i1 c VAC, 60 Hz 3.0%afn(i MS- S OOUDLSE: 240 VAC, 50 Hz, 1.5 amps. Wire size: minimum 14 AWG (2.00 mm2) with 600 V insulation. Battery: Two 12 V 18AH lead -acid batteries. Battery charger capacity: 7 -18 AH. MS-92000DLS cabinet holds maximum of two 18 AH batteries. Communication Loop: Supervised and power -limited. Notification Appliance Circuits: Each terminal block pro- vides connections for two Style Y (Class B) or one Style Z (Class A) for a total of four Style Y (Class B) or two Style Z Class A) NACs {G 1 /2 watt (P/N 71252 )"for'Styiev (C`lassAC. Refer to panel documen- tation and Fire•Lite Device Compatibility Document for listed compatible devices. Two Programmable Relays and One Fixed Trouble Relay: Contact rating: 2.0 amps @ 30 VDC (resistive), 0.5 amps @ 30 VAC (resistive). Form-C relays. Special Application Power (24 VDC Nominal): Jumper selectable (JP4) for conversion to resettable power output. Up to 0.5 amps total DC current available from each output. Power -limited. Four -Wire Resettable Special Application Smoke Detector Power (24 VDC nominal): Up to 0.5 amps for powering four - wire smoke detectors. Power -limited. Refer to Fire•Lite Device Compatibility Document for listed compatible devices. Remote Sync Output: Remote power supply synchronization output. Nominal special application power: 24 VDC. Maximum current: 40 mA. End -of -Line Resistor: 4.7K ohm. Output linked to NAC 1 control. Supervised and power -limited. Telephone Interface: Requires dedicated business tele- phone number with a minimum of 7 volts DC. Obtain dedicated phone line directly from your local phone company. Do not use shared phone lines or PBX (digital) type phone line extensions. Cabinet Specifications Door: 19.26" (48.92 cm.) high x 16.82" (42.73 cm.) wide x 0.12" (.30 cm.) deep. Badcbox: 19.00" (48.26 cm.) high x 101111111111111�rdV ii �V71 ISO 9001 C E R TOFU E U MOMS QUALITY SYSTEMS 11111111111111111 111111111111111111111111111111111111111111111111111111111111111 uluuuuii1111i 1111111111:1:u11111111:uo11VOMMINI1uuuhltinuuuuuuuuuuuiu 1111 tzuuurut1111111: 16.65" (42.29 cm.) wide x 5.20" (13.34 cm.) deep. Trim Ring (TR-CE): 22.00" (55.88 cm.) high x 19.65" (49.91 cm.) wide. Shipping Specifications Weight: 26.9 lbs. (12.20 kg.) Dimensions: 20.00" (50.80 cm.) high x 22.5" (57.15 cm.) wide x 8.5" (21.59 cm.) deep. Temperature and Humidity Ranges This system meets NFPA requirements for operation at 0 - 49°C/32 - 120°F and at a relative humidity 93% * 2% RH (noncondensing) at 32°C * 2°C (90°F ± 3°F). However, the useful life of the system's standby batteries and the electronic components may be adversely affected by extreme tempera- ture ranges and humidity. Therefore, it is recommended that this system and its peripherals be installed in an environment with a normal room temperature of 15 - 27°C/60 - 80°F. NFPA Standards The MS-92000DLS complies with the following NFPA 72 Fire Alarm Systems requirements: - LOCAL (Automatic, Manual, Waterflow and Sprinkler Supervisory). - AUXIUARY (Automatic, Manual and Waterflow) (requires 4XTMF). - REMOTE STATION (Automatic, Manual and Waterflow) (Where a DACT is not accepted, the alarm, trouble and supervisory relays may be connected to UL 864 listed transmitters. For reverse polarity signaling of alarm and trouble, 4XTMF is required.) - PROPRIETARY (Automatic, Manual and Waterflow). - CENTRAL STATION (Automatic, Manual and Waterflow, and Sprinkler Supervised). - AUTO DETECTOR SELF TEST Agency Listings and Approvals The listings and approvals below apply to the basic MS- 92000DLS control panel. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. • UL: S624 • FM approved • CSFM: 7165-0075:208 • MEA: 120-06-E LiteSpeed" is a trademark; and FireLite® Alarms is a registered trademark of Honeywell international Inc. Microsoft® and Windows® are registered trademarks of the Microsoft Corporation. 02007 by Honeywell International Inc Ali rights reserved. Unauthorized use of this document is strictly prohibited. 1111 11111l1111151111111111 F 11111111 1111111V1MIIIAui iiNSiL 1Y6 1111iWL4N I INi IIIIIOI<Il1111FN1 g 1i fi MOM This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate.. We cannot cover aII specific applications or anticipate aII requirements. All specifications are subject to change without notice. 181 111 11111 11111111111 I1111O 1111611111 1 Ilmmlmm 1M4011�ue 14141411111111mmmm41111111111111111111111111111111111111111111111 v u1111 mlremmmmmuvn111,1 »:,ilvummWag Made in the U.S A 11111111111 For more information, contact Fire•Lite Alarms, Phone: (800) 627.3473, FAX° (877) 699-4105, www.firelite.com MS11101IhN@I1111I1111111V11111111n}IIhm,7mmiIMOOOSIWIflP 1 N tlYN015SiM1Ifl11110116VNIMIINIIMVNIIfmE'INIIOMtiNII1MY0PIllldM;mq„IpnttVllifI111hININi1691111IIINMN1@SAU11R1'n!,'tfN@q>py,IIIIN7N{IIIYIIIN111111VIIIIli=111@1G(NIMUMMl!S'iENINIIIMMIINbNIVIdIVIM10NMIMt11ANII1taIMtlIIYN&dR'NiWMEPMh191flVNi1YICVfMdVNYOMIM6491MINYNNMIVYNm4NY1YMiV1IPIIMMN'VOIl1U'w1m4%1MN11f11MOYNIIMIN'mN� Page 4 of 4 - - DF-52422:A • 06/29/07 1101 II' 8 • 110 Fire•LITe®Alarms www.firellte.com GENERAL The FCPS-24FS6 is a compact, cost-effective, 6-amp re- mote power supply with battery charger. The FCPS-24FS6 may be connected to any 12- or 24-volt Fire Alarm Control Panel (FACP) or may stand alone. Primary applications include Notification Appliance (bell) Circuit (NAC) expan- sion (to support ADA requirements and NAC synchroniza- tion) or auxiliary power to support 24-volt system acces- sories. The FCPS-24FS6 provides regulated and filtered 24 VDC power to four Notification Appliance Circuits con- figured as either four Class B (Style Y) or Class A (Style A, with ZNAC-4 option module). Altemately, the four outputs may be configured as all non-resettable or all resettable or two non-resettable and two resettable. The FCPS- 24FS6 also contains a battery charger capable of charg- ing up to 18 Amp Hour batteries. FEATURES • UL Listed NAC Synchronization using System Sensor, Wheelock or Gentex (Commander Series) appliances. • Cascadable up to 10 power supplies (four with Gentex) with strobe timing maintained. • Operates as a sync follower or a sync generator (default). * See note on reverse side. • Contains two, fully -isolated input/control circuits (trig- gered from FACP Notification Appliance Circuit [NAC expander mode] or jumpered permanently on [stand- alone mode]). • Optional mounting kit, P/N 90286, to intemally house addressable SLC control module (CRF-300 or CMF- 300) for alarm activation. • Four Class B (Style Y) or four Class A (Style Z) (with ZNAC- 4 Module) Notification Appliance Circuits. • 6.0 A full load output (3.0 A maximum per circuit) in NAC expander mode (UL 864). • 4.0 A continuous output in stand-alone mode (UL 1481). • In stand-alone mode, output power circuits may be configured as resettable (reset line from FACP required) or non-resettable or a mix of two and two. • Fully regulated and filtered power output (optimal for powering four -wire smoke detectors, annunciators and other system peripherals requiring regulated/filtered power). • Power -limiting technology meets UL power -limiting re- quirements. • Form-C normally -closed trouble relay. • Fully supervised power supply, battery and Notification Appliance Circuits. • Selectable earth fault detection, APPROVED M EA 219-02-E Califomia State Fire Marshal 7315-0075:206 July 8, 2004 DF-52301 • D-025 FCPS-24FS6 24 Volt, 6 Amp Remote Power Supply Section: Power Supplies/Accessories LISTED S2424 VI • AC trouble report selectable for immediate or 8 hour delay. • Works with virtually any UL 864 fire alarm control which utilizes an industry -standard reverse -polarity notifica- tion circuit (including unfiltered and unregulated bell power). • Requires input trigger voltage of 9.0 - 32 VDC. • Self-contained in compact, lockable cabinet (15" [38.1 cm] H x 14.5" [36.8 cm] W x 2.75" [7.0 cm] D). • Includes integral battery charger capable of charging up to 18 AH batteries. Cabinet capable of housing 7.0 AH batteries. • Battery charger may be disabled via dip switch for appli- cations requiring larger batteries. • Fixed, clamp -type terminalblocks accommodate up to 12 AWG (3.1 mm2) wire. Fire•Lite® Alarms Is a Honeywell company. This document is not Intended to be used for Installation purposes. We try to keep our product Information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice.. For more Information, contact Fire•Lite Alarms, One Fire-Lite Place, Northford, Connecticut 06472 Phone: (800) 627-3473, Toll -Free FAX: (877) 699-4105.. ISO soon C E R T 1 F 1 E MEWS QUALITY SYSTEMS DF-52301 07108d04 —• Page 11 of 2 ofijik • 4111 Oit • • 410 • 1,1 STANDARDS and CODES The FCPS-24FS6 complies with the following standards: • NFPA 72 National Fire Alarm Code. • UL 864 Standard for Control Units for Fire Alarm Sys- tems (NAC expander mode). • UL 1481 Power Supplies for Fire Alarm Systems (stand-alone mode). SPECIFICATION Primary (AC) Power • Wire size: rnmum 14 A 'VG (2.0 mm2) wit 600V insu- lation. Control Input Circuit • T ; p 1 r ( t" • Trigger Current: 2.0 mA (16 - 32 V). (per input) 1.0 mA (9 -16 V). Trouble Contact Rating • 5.0Aat24VDC. Auxiliary Power Output • Specific Application Power - 500 mA maximum. Output Circuits • +24 VDC filtered, regulated. ▪ VW* u p�. • 4.0 A maximum total continuous current for all outputs (Stand-alone mode). • 6.0 A maximum total short-term current for all outputs (NAC Expander mode). Secondary Power (Battery) Charging Circuit • Supports lead -acid batteries only. oao t h a e a age: • Maximum Battery Capacity: 18 AH. ORDERING INFORMATION FCPS-24FS6 Remote charger power supply (120 VAC). Includes main printed circuit board, transformers, red enclosure, and installation instructions. FCPS-2456RB Replacement mother board. PN 90286 FCPS-24F Module Mounting Kit ZNAC-4 A77-716B BAT-1270 Class A (Style Z) NAC option module 12/24 VDC end -of -line relay for monitoring 4-wire smoke detector power. Battery, 12 volt, 7.0 AH (two required). APPLICATIONS Example 1 Expand notification appliance power an additional 6.0 amps. Use up to 4 Class B (Style Y) outputs or 4 Class A (Style Z) outputs (using the ZNAC-4). In this example, the FACP notification appliance circuits will activate the FCPS-24FS6 when reverse polarity acti- vation occurs. Trouble conditions on the FCPS-24FS6 are sensed by the FACP through the Notification Appli- ance Circuit. Page 2 of 2 _.. DF 52301 07)08104 Example 2 Use the FCPS-24FS6 to expand auxiliary regulated 24 volt system power up to 4 amps. Both non-resettable and resettable power options are available. Resettable outputs are created by connecting the resettable output from the FACP to one or both of the FCPS-24FS6 inputs. Example 3 Use addressable control modules to activate the FCPS- 24FS6 versus the FACP Notification Appliance Circuits. This typically allows for mounting the FCPS-24FS6 at greater distances* away from the FACP while expanding system architecture in various applications. In this example, an addressable control module is used to activate the FCPS-24FS6 and an addressable monitor module is used to sense FCPS-24FS6 trouble conditions. Local auxiliary power output from the FCPS-24FS6 pro- vides power to the addressable control module. •Fire•Lite's MS-9200, MS-92000D, (198-point) or MS-9600 (636- point) addressable FACPs have the capability of locating control and monitor modules up to 10,000 feet (3048 m) away. Sync Follower/Generator Note: In some installations, It is necessary to synchronize the flash timing of all strobes in the system for ADA compliance. Strobes accomplish this by monitoring very short timing pulses on the NAC power, which are created by a Fire Alarm Control Panel such as the Fire•Lite MS-9600. When installed at the end of a MS-9600 NAC wire run, this power supply can track (i.e. "follow") the strobe synchro- nization timing pulses on the existing NAC wire run. This maintains the overall system flash timing of the addi- tional strobes attached to this power supply. When this power supply is configured (via DIP switch settings) as a "sync follower," this supply's NAC outputs track the strobe synchronization pulses present at this supply's sync input terminal. The pulses are originated from an upstream FACP or other power supply. When this power supply is configured (via DIP switch settings) as a "sync generator," this supply's sync input terminal are not used. Rather, this power supply is the originator of the strobe synchronization pulses on this power supply's NAC outputs. In "sync generator" mode, the sync type (System Sensor, Wheelock, or Gentex) is selectable via DIP switch settings. o� C7� s '11111111111111111111 1,0 • LIR 1i FI re.uTe®ALarms www.flrellte.com GENERAL The LCD-80F is a compact, cost-effective, 80-character, backlit LCD remote Fire Annunciator for use with the Fire•Lite MS-92000D and MS-9600 Fire Alarm Control Pan- els (FACPs). The LCD-80F displays complete system point status information and includes control switches for remote control of critical system functions. Up to 32 LCD-80Fs may be connected onto the EIA-485 terminal port (TB7) of each FACP. The LCD-80F requires no programming, which saves time during system commis- sioning. FEATURES • 80-character Liquid Crystal Display. • Mimics all display information from the host panel. • Control switches for System Acknowledge, Signal Silence, Drill and Reset with enable key. • System status LEDs for Power, Alarm, Trouble, Supervisory and Alarm Silenced. • No programming necessary — LCD-80F con- nects to the terminal port (TB7) on the FACP. • Displays device type identifiers, individual point alarm, trouble or supervisory, zone and custom alpha labels. • Time -and -date display field. • Aesthetically pleasing design. • May be powered by 24 VDC from the host FACP or by remote power supplies (requires 24 VDC). • Up to 32 LCD-80F annunciators per FACP. • Plug-in terminal blocks for ease of installation and ser- vice. • Can be remotely located up to 6,000 feet (1828.8 m) from the FACP. • Local piezo sounder with alarm and trouble resound. • Semi -flush mounts to 2.188" (5.556 cm) minimum deep, three -gang electrical box (Fire•Lite P/N 10103) or three- gangable electrical switchbox. • Surface -mounts to Fire•Lite SBB-3 surface backbox. OPERATION The LCD-80F annunciator provides the FACP with point annunciation with full display text on an 80-character LCD display. The LCD-80F also provides an array of LEDs to indicate system status, and includes control switches for remote control of critical system functions. January 26, 2005 LCD-80F DF-52185 • B-150 80-Character Liquid Crystal Display Remote Fire Annunciator Section: Annunciators LISTED S2424 CS635 M EA 72-01-E ANNLINCAA OR it ouou5ni 011MyRINIIIINR, 111111115,10111111111111111101,iou mu a M/I ▪ F 71 i U MAi o R /a LCD-80F California State Fire Marshal 7120-0075:190 APPROVED The LCD-80F provides the FACP with up to 32 remote se- rially connected annunciators. All field -wiring terminations on the LCD-80F use removable, compression -type termi- nal blocks for ease of wiring and circuit testing. Communication between the FACP and the annunciators is accomplished over an EIA-485 serial interface, which greatly reduces wire and installation cost over traditional systems. Six wires total are required: four for the EIA-485 communications (two in and two return); and two for the 24 VDC regulated power. Dip switches control local functions such as: piezo disable, control switches/key-switch disable, transmit/receive mode. INSTALLATION The LCD-80F can be semi -flush mounted to a 2.188" (5.556 cm) minimum deep, three -gang electrical box (Fire•Lite P/N 10103) or three-gangable electrical switchboxes.: Alter- nately, an SBB-3 surface backbox is available for surface - mount applications. Fire•Lite® Alarms Is a Honeywell company. This document Is not intended to be used for installation purposes. We try to keep our product Information tap -to -date and accurate. We cannot cover ail specific applications or anticipate all requirements. Aii specifications are subject to change without notice. For more information, contact Fire•Lite Alarms, One Fire-Lite Place, Northford„, Connecticut 06472. Phone: (800) 621-3473„ loil•Free FAX (877) 699-4105. 0 9001 E Ft T I F 1 E QUALITY SYSTEMS Oi11mNiliINWNON90Nu00NMOMOJ000MONmm111MlIN4 Made V rahe U.S.A. DF•52185. 01'i26105 -•• Page 1 of 2 0)1 0011 111111111111r �y 116 1111111111111111111 100 �IV PRODUCT LINE INFORMATION LCD-80F 80-character, backlit, LCD Fire Annunciator with control switches for remote control of system functions, and key -switch lock. 10103 Three -gang electrical box, minimum 2.188" (5.556 cm) deep, for semi -flush mount applica- tions. SBB-3 Three -gang surface backbox for surface -mount applications. LCD-80F TERMINAL MODE WIRING EXAMPLE h]� ,GI o ill I11,1,�? 151 14 Iw�lui ,dx TAW 111111 11111111111 1 • MI 1111 �,t I n 41 ' 11 As 1111111 Fill 11111 Addressable Fire Alarm Control Panel Up to 6,000 ft. (1828.8 m) between EACH DEVICE in the EIA-485 loop` Terminal Mode LCD-80F LCD-80F EIA-485 r - (2-wires) 24 VDC (2-wires BOSS Up to 6,000 ft. (1828.8 m) / back from last device to end of EIA-485 loop Notes: 1) EIA-485: Maximum of 6,000 feet (1828.8 m) cable length from FACP to LCD-80F annunciators, 6,000ft cable length between each LCD-80F and 6,000 ft from the last LCD-80F back to the FACP. Circuit Is power -limited. 2) Up to 32 LCD-80F annunciators may be used on the EIA-485 circuit. When multiple LCD-80Fs are used, the FACP will re- quire additional power supplies (refer to panel documenta- tion). Terminal Mode EIA-485 retum (2-wires) -a a, BOBS LCD-80F 4 4 3) Between each LCD-80F annunciator are four wires: a twisted - shielded pair for data communications and a pair for 24 VDC power. The retum circuit only requires two wires (twisted) for data communication supervision, wired from the last LCD- 80F annunciator on the loop. MOUNTING TO BACKBOX(ES) The LCD-80F annunciators can be semi -flush mounted in a three -gang electrical box with a minimum depth of 2.188" (5.556 cm) (Fire-Lite P/N 10103). The LCD-80F annunciators can be mounted in three- gangable electrical switchboxes connected together. NOTE: Altemately, LCD-80F annunciators can be mounted to the SBB-3 surface backbox for surface -mount applica- tions. Electrical Installer's Note: This annunciator may not fit easily into a standard 3-gang electrical box if locking clamps are used to secure wiring entering the rear or side knock- outs. Only use the TOP or BOTTOM knockouts to bring wiring into a standard 3-gang electrical box, 5.813" (14.764 cm) wide x 4.0" (10.16 cm) high x minimum Z188" (5.556 cm) deep, three -gang electrical box (Fire•Lite P/N 10103, shown at right). Page 2 of 2 -- DF-52185.01l26/05 Mounting Holes (4) LCD-80F flange FIRE ALARM ANNUNCIATOR FIRE-LITE ALARMS, INC. SYSTEMS ALL NORMAL 1:06A 032001 521185mm.wmf 0 eweisurmans 14) ulE ul ity n Fig 71) opt Fire•ure warms www.firellte.com July 14, 2004 DF-52384 • E-160 SD355(A)/ SD355T(A) Addressable Photoelectric Smoke Detectors Section: Addressable Devices GENERAL The Fire•Lite Alarms SD355 and SD355T addressable, low -profile plug-in photoelectric detectors use a state-of- the-art photoelectric sensing chamber with communica- tions to provide open area protection and are used exclu- sively with Fire•Lite's MS-9200, MS-92000D, and MS-9600 Addressable Fire Alarm Control Panels (FACPs). The SD355T adds thermal sensors that will alarm at a fixed temperature of 135°F (57°C). Since these detectors are addressable, they will help emergency personnel quickly locate a fire during its early stages, potentially saving pre- cious rescue time while also reducing property damage. Two LEDs on each sensor light to provide a local, visible sensor indication. Remote LED annunciator capability is available as an optional accessory (P/N RA400Z). FEATURES SLC loop: • Two -wire loop connection. • Unit uses base for wiring, detector head plugs -in. Addressing: • Addressable by device. • Direct Decade 01 — 99 (MS-9200, MS-92000D) and 01 — 159 (MS-9600) entry of address. Architecture: • Unique single -source, dual -chamber design to respond quickly and dependably to a broad range of fires. ▪ Sleek, Cow -profile design. • Integral communications and built-in type identification. • Buitt-in tamper -resistant feature. • Removable cover and insect -resistant screen for simple field cleaning. Operation: • Withstands air velocities up to 1,500 feet -per -minute (7.6 misec.) without triggering a false alarm. • Factory preset at 1.5% nominal sensitivity for panel alarm threshold level. • Visible LED "blinks" when the unit is addressed (com- municating with the fire panel) and latches on in alarm. Mechanicals: • Sealed against back pressure, • Direct surface mounting or electrical box mounting. ▪ Mounts to: single -gang box, 3.5" (8.89 cm) or 4.0' (10,16 cm) octagonal box, or 4.,0 (1(116 cm) square electrical box (using a plaster ring - included). LISTED S1059 M EA 6934pho1.lvu SD355 with B350LP base California State Fire Marshal 7272-0075:194 APPROVED Other system features: • Fully coated circuit boards and superior RF/transient pro- tection. • 94-V0 plastic flammability rating. • Low standby current. Options: • Remote LED output connection (P/N RA400Z). APPLICATIONS Use photoelectric detectors in life -safety applications to pro- vide a broad range of fire sensing capability„ especially where smoldering fires are anticipated, Ionization detec- tors are often better than photoelectric detectors at sens- ing fast, flaming fires, Fire•Lite® Alarms is a Honeywell company. This document is not intended to be used for installation purposes, We try to keep our product information up-to-date and accurate,, We cannot cover ail specific applications or anticipate all requirements. An specifications are subject to change without notice, For more information, contact Fire•Lite Alarms, One Fire-Lite Place, Northford, Connecticut 06472,, Phone. (800) 627-3473, Toil -Free FAX: (877) 699.4105, ISO soon E R T t F 1 E U rx Diu QUALITY SYSTEMS DF 32384.07114/04 — Page 1 of 2 1' 1011 11) Fib Ali 01 ) Ou CONSTRUCTION These detectors are constructed of off-white LEXAN®. SD355(T) plug-in, low -profile smoke detectors are designed to commercial standards and offer an attractive appear- ance. LEXAN® is a registered trademark of GE Plastics, a subsidiary of General Electric Company. INSTALLATION SD350(T) plug-in detectors use a detachable mounting base to simplify installation, service and maintenance. Mount base on box which is at least 1.5 inches (3.81 cm) deep. Suitable boxes include: • 4.0" (10.16 cm) square box with plaster ring. • 4.0" (10.16 cm) octagonal box. • 3.5' (8.89 cm) octagonal box. • Single -gang box. NOTE: Because of the inherent supervision provided by the SLC loop, end -of -line resistors are not required. Wiring °T--taps° or branches are permitted for Style 4 (Class B) wiring only. OPERATION Each SD355(T) uses one of 99 possible addresses on the MS-9200 and MS-92000D Signaling Line Circuit (SLC), or up to 318 (159 on each loop) on the MS-9600 SLC. It re- sponds to regular polls from the system and reports its type and status. The SD355(T) addressable photoelectric sensor's unique unipolar chamber responds quickly and uniformly to a broad range of smoke conditions and can withstand wind gusts up to 1,500 feet -per -minute (7.6 m/sec.) without sending an alarm level signal. Because of its unipolar chamber, the SD355(T) is approximately two times more responsive than most photoelectric sensors. This makes it a more stable detector. DETECTOR SENSITIVITY TEST Each detector can have their sensitivity tested (required per NFPA 72, Chapter 7 on Inspection, Testing and Main- tenance) when installed/connected to an MS-9200, MS- 92000D, or MS-9600 addressable fire alarm control panel. The results of the sensitivity test can be printed off the MS- 9200, MS-92000D, or MS-9600 for record keeping. SPECIFICATIONS Voltage range: 15 - 32 VDC (peak). �/, fl /p/ PP t by ur ent 300'} %24 VD ar% dl Air velocity: 1,500 ft./min. (7.6 m/sec.) maximum. Diameter: 6.1" (15.5 cm) installed in B350LP base Height: 2.1" (5.33 cm) installed in B350LP base. Weight: 3.6 oz. (102 g). Operating temperature range: for SD355: 0°C to 49°C (32°F to 120°F) SD350; for SD355T: 0°C to 38°C (32°F to 100°F). Temperature: 0°C - 49°C (32°F - 120°F) Relative humidity: 10% -• 93%, non condensing Page 2 of 2 - DF.52384.07/14/04 PRODUCT LINE INFORMATION NOTE: A° suffix indicates ULC-Listed model. SD355 Addressable photoelectric detector (8350LP base included). SD355A Same as SD355 with ULC Listing (8350LPA base included). SD355T Same as SD355 but with thermal element (8350LP base included). SD355TA Same as SD355T with ULC Listing (8350LPA base included). RA400Z(A) Remote LED. Mounts to a single -gang box. B350LP(A) Plug-in detector base (included). Dimen- sions:6.1" (15.5 cm). Mounting: 4.0" (10.16 cm) square box with or without plastic ring, 4.0" (10.16 cm) octagonal box, 3.5" (8.89 cm) octagonal box, or single -gang box. All mount- ing boxes have a minimum depth of 1.5" (3.81 cm). B224RB(A) Plug-in System Sensor relay detector base. Diameter: 6.2" (15.75 cm). Mounting: 4.0" (10.16 cm) square box with or without plastic ring, 4.0" (10.16 cm) octagonal box, or 3.5" (8.89 cm) octagonal box. All mounting boxes have a minimum depth of 1.5" (3.81 cm). B224BI(A) Intelligent isolator base, isolator SLC from shorts on the loop. B501BH(A) Plug-in System Sensor sounder detector base. Diameter: 6.0" (15.24 cm). Mounting: 4.0" (10.16 cm) square box with or without plastic ring. Mounting box has a minimum depth of 1.5" (3.81 cm). B501BHT(A) Same as B501BBH(A), but includes tempo- ral sounder. Accessories: RA400Z(A) SMK400 RMK400 M02-04-01 XR-2 XP-4 Remote LED annunciator. 3 - 32 VDC. Fits U.S. single -gang electrical box. For use with 8501(A) and 8350LP(A) bases only. Surface mounting kit provides for entry of surface wiring conduit For use with 8501(A) base only. Recessed mounting kit, Foruse with 8501(A) base only. Test magnet Detector removal tool., Allows installation and/ or removal of detector heads from bases in high ceding applications. Extension pole for XR-2. Comes in three 5-ft.. (1.524 m) sections. DF 52013:A • E-100 101 • • 1111111111111111, 111111111111111111111 • Oth 1001110114 121(1,1 BG-1 2LX Addressable Manual Pull Station General The Are•Lite BG-12LX is a state-of-the-art, dual -action (i.e., requires two motions to activate the station) pull station that includes an addressable interface (mounted inside) for Fire.Lite's addressable fire alarm control panels (FACPs). Because the BG-12LX is addressable, the control panel can display the exact location of the activated manual station. This leads fire personnel quickly to the location of the alarm. Features • Maintenance personnel can open station for inspection and address setting without causing an alarm condition. • Built-in bicolor LED, which is visible through the handle of the station, flashes in normal operation and latches steady red when in alarm. • Handle latches in down position and the word "ACTIVATED" appears to clearly indicate the station has been operated. • Captive screw terminals wire -ready for easy connection to SLC loop (accepts up to 12 AWG/3.25 mm2 wire). • Can be surface mounted (with SB-10 or SB-I/O) or semi - flush mounted. Semi -flush mount to a standard single - gang, double -gang, or 4" (10.16 cm) square electrical box. • Smooth dual -action design. • Meets ADAAG controls and operating mechanicsms guide- lines (Section 4.1.3[13]); meets ADA requirement for 5 Ib. maximum activation force. • Highly visible. • Attractive shape and textured finish. • Key reset. • Includes Braille text on station handle. • Optional trim ring (BG12TR). • Meets UL 38, Standard for Manually Actuated Signaling Boxes. Construction Shell, door, and handle are molded of durable LEXAN® (or polycarbonate equivalent) with a textured finish. Specifications • Normal operating voltage: 24 VDC. • Maximum SLC loop voltage: 28.0 VDC. ik 'ou 230,00. • Ambient Temperature: 32°F to 120°F (0°C to 49°C) • Relative Humidity 93% t 2% RH (noncondensing) at 32°C t 2°C (90°F ± 3°F) • For use indoors in a dry location Installation The BG-12LX will mount semi -flush into a single -gang, double - gang, or standard 4" (10.16 cm) square electrical outlet box, or will surface mount to the model SB-10 or SB-UO surface back - box. If the BG-12LX is being semi -flush mounted, then the optional trim ring (BG12TR) may be used. The BG12TR is usually needed for semi -flush mounting with 4" (10.16 cm) or double -gang boxes (not with single -gang boxes). NNrvMu MIN,,E11ml rmouuuuuuuuullluW 1105misvuuuuUMIIIl lml IiEGREII51INIMEOIOflIItlmI1I0I21NIIfifi11NmMNIMMuulWldBOMMIMERtl111111111111111111110ll20I111I1MMINI •LIT— SAL by Hone ell PUSH w�N, PULL; DOWN Operation Pushing in, then pulling down on the handle causes it to latch in the down/activated position. Once latched, the word "ACTI- VATED" (in bright yellow) appears at the top of the handle, while a portion of the handle protrudes from the bottom of the station. To reset the station, simply unlock the station with the key and pull the door open. This action resets the handle; dos- ing the door automatically resets the switch. Each manual station, on command from the control panel, sends data to the panel representing the state of the manual switch. Two rotary decimal switches allow address settings (1 - 159 with Breakaway Tab removed for MS-9600, 1 - 99 and MS-92000DLS, 1 - 50 for MS-9050UD). Architectural/Engineering Specifications Manual Fire Alarm Stations shall be non -coded, with a key - operated reset look in order that they may be tested, and so designed that after actual Emergency Operation, they cannot be restored to normal except by use of a key. An operated sta- tion shall automatically condition itself so as to be visually detected as activated. Manual stations shall be constructed of red -colored LEXAN (or polycarbonate equivalent) with dearly visible operating instructions provided on the cover. The word FIRE shall appear on the front of the stations in white letters, 1.00 inches (2.54 cm) or larger. Stations shall be suitable for surface mounting on matching badkbox SB-10 or SB-I/O; or semi -flush mounting on a standard single -gang, double -gang, or 4" (10.16 cm) square electrical box, and shall be installed within the limits defined by the Americans with Disabilities Act (ADA) or per national/Iocai requirements. Manual Stations shall be Underwriters Laboratories listed. 6BINIMIRRMINIMIII1112111IIIIIIIIIIIIIIIIVIIIPdtlllllMIIIVIEi� Pli INIIPII6MINVIIONtiiNmPIMgq'IE 'V'NINIIHI'!nWM't'M6riNINIMMYIAIIN SIERRImffiI iMINVIIR@.k INA11W7MINNIIMIS DF-52013: A. 02/05/2008 Page 1 of 2 0 101 0 lit • 111111111 • tIp 0 s 1 Manual stations shall connect with two wires to one of the con- trol panel SLC loops. The manual station shall, on command from the control panel, send data to the panel representing the state of the manual switch. Manual stations shall provide address setting by use of rotary decimal switches. Product Line Information BG-12LX: Dual -action addressable pull station. Includes key locking feature. SB-10: Surface backbox; metal. SB-VO: Surface bac kbox, plastic. 1111111111111111111111111111111111 Back of station without door Terminal Connections: 1 SLC (-); 2 SLC (+) Cover open to show easy access to miniature monitor module, rotary switch, and UL label. Patented: U.S. Patent No. D428,351; 6,380,846; 6,314,772; 6,632,108. i4gr"�ONhMh"M��h�,ti9��n�riwidllk�ll��Q��YIDdINI�Ni�i ISO 9001 CE riTIF1EO IMARISMI QUALITY STATE BG12TR: Optional trim ring. 17003: Keys, set of two. Agency Listings and Approvals In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in pro- cess. Consult factory for latest listing status. • UL Listed: S711 • MEA:67-02-E • CSFM: 7150-0075:184 • FM Approved Detail of BREAKAWAY TAB* ROTARY DECIMAL SWITCHES * Remove tab to select addresses above 99. Fire•Llte is a registered trademark of Honeywell international Inc. LEXAN® is a registered trademark of GE Plastics, a subsidiary of General Electric Company. C2008 by Honeywell International Inc. Ali rights reserved Unauthorized use of this document Is strictly prohibited.. Ml4 ll II MEEbaMN lll!V11 NL1 P IBML Nf rlrA �1 Vttr0 t�8 u1 � This document is not intended to be used for installation purpose& We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are Subject to change without notice. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473. FAX, (877) 699-4105. www.firelite.com WIv'S1lrlllty12i4411NL�I1itpV Made in the U.S. A. i1=nuu15imurvmii1=u11=uxiuMEMiroINIMasOimiSMumNINiiMiroiSIM1u110A11KIMmMwsIMEMMEMnvrNIMMIuiwumm010n101uHuM0iu0MIHNoMmiuuoMI¢wuiMuMMI1iouuiV0u1irm4%11uoimAi11flurMiwNxiMEMINIMMEuMirmrvMID Page 2 of 2 •— DF-52013:A • 02/05/2008 id March 24, 2005 DF-52385 • E-71 0 a 11111111111111, 11111111111111115 • • I ( • r, FI re•LrTe®ALarms www.firelite.com H355(A) Series Intelligent Addressable Thermal (Heat) Detectors for MS-9600, MS-92000D Section: Addressable Devices GENERAL The Fire•Lite Alarm H355 Series thermal detectors are addressable sensors that use a state-of-the-art thermistor sensing circuit for fast response. These sensors are de- signed to provide open -area protection and are intended for use with Fire•Lite's MS-9600 and MS-92000D Fire Alarm Control Panels (FACPs). Both the H355 and H355R sensors provide fixed tempera- ture alarm detection at 135°F. The H355R sensor responds to rate -of -rise conditions of greater than 15°F/8.3°C per minute. H355HT provides fixed high -temperature detection at 190°F/88°C. These thermal detectors provide cost ef- fective, addressable property protection in a variety of ap- plications. Two LEDs on each sensor light to provide a local, visible sensor indication. Remote LED annunciator capability is available as an optional accessory (P/N RA400Z). FEATURES SLC loop: • Two -wire SLC loop connection. • Unit uses base for wiring. Addressing: • Addressable by device. • Direct Decade 01 — 159 (MS-9600), or 01 — 99 (MS- 92000D) entry of address. Architecture: • Sleek, low -profile, stylish design. • State-of-the-art thermistor technology for fast response. • Integral communications and built-in device -type identi- fication. • Built-in tamper resistant feature. • Built-in functional test switch activated by external mag- net. Operation: • Factory preset at 135°F (57°C). • Rate -of -rise model (H355R), 15°F (8.3°C) per minute. • 360°-field viewing angle of the visual alarm indicators (two bicolor LEDs). LEDs blink green in Normal condi- tion and tum on steady red in Alarm. • Visible LEDs 'blink" every time the unit is addressed. Mechanicals: • Sealed against back pressure. • SEMS screws for wiring of the separate base. • Designed for direct -surface or electrical -box mounting. LISTED S2517 Califomia State Fire Marshal 7270-0075:195 APPROVED 11,11,11,01,1 H355 in B350LP base diamitric 6gaepho1.09 • Plugs into separate base for ease of installation and main- tenance. • Separate base allows interchange of photoelectric, ion- ization and thermal sensors. Other system features: • Remote test feature from the panel. • Walk test with address display. • Low standby current. • 94-5V plastic flammability rating. Options: • Remote LED output connection to optional RA400Z re- mote LED annunciator. • Recessed (RMK400) or surface (SMK400) base mount- ing kits. APPLICATIONS Use thermal detectors for protection of property. CONSTRUCTION These detectors are constructed of off-white Bayblend®. The H355 Series plug-in intelligent thermal detectors are designed to commercial standards and offer an attractive appearance. BayblendS) is a registered trademark of Bayer Corporation. Flre•Lite® Alarms is a Honeywell company. This document is not intended to be used for installation purposes, We try to keep our product informa- tion up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements.. All specifications are subject to change without notice, For more information, contact Fi►e•Lite Alarms, One Fire-Lite Place, Northford, Connecticut 06472, Phone- (800) 627-3473„ Toll -Free FAX. (877) 699-4105. ISO 9001 C E R-r1 F 1 EEO QUAIIIIMTY SYSTEMS DF-52385 • 03/24/05 Page 1 of 2 ,F• 0,10 140, Fib 11 INSTALLATION H355 Series plug-in intelligent thermal detectors use a de- tachable base to simplify installation, service and mainte- nance. Installation instructions are shipped with each de- tector. Mount base (all base types) on box that is at least 1.5" (3.81 cm) deep. Suitable boxes include: • 4.0" (10.16 cm) square box. • 3.5" (8.89 cm) or 4.0" (10.16 cm) octagonal box. • Single -gang box (except relay or isolator base). NOTE: Because of the inherent supervision provided by the SLC loop, end -of -line resistors are not required. Wiring 'T-taps" or branches are permitted for Style 4 (Class B) wiring only. OPERATION Each H355 Series detector uses one of 159 (MS-9600) or 99 (MS-92000D) possible addresses on a control panel SLC loop. It responds to regular polls from the control panel and reports its type and the status. If it receives a test com- mand from the panel (or a local magnet test), it stimulates its electronics and reports an alarm. It blinks its LEDs when polled and tums the LEDs on when commanded by the panel. The H355 Series offers features and performance that represent the latest in thermal detector technology. SPECIFICATIONS Diameter: 6.1" (15.5 cm) installed in B350LP. Height: 2.1" (5.33 cm). Weight: 4.8 oz. (137 g). Installation temperature: -4°F to 100°F (-20°C to 38°C). Humidity range: 10% to 93% relative humidity (non -con- densing). Voltage range: 15 to 32 VDC peak. �/urrifrrehnn/tC/ , o J jVDC(one communication every 5 seconds with LED blink enabled). n#'l .5 P@. 24 f Mounting: B350LP flanged base, included. Fixed -temperature setpoint: 135°F (57°C). Rate -of -rise detection: responds to greater than 15°F/ 8.3°C per minute. Recommended spacing: 50' (15.24 cm) for both 190° fixed and 135° fixed/rate-of-rise models (UL and FM listed dis- tances). Page 2 of 2 -•- DF.52385.03/24/05 PRODUCT LINE INFORMATION NOTE: "A" suffix indicates ULC-Listed model. H355 Intelligent thermal sensor (B350LP base in- cluded). H355A Same as H355 but with ULC Listing (B350LPA base included). H355R Same as H355 with rate -of -rise feature (B350LP base included). H355RA Same as H355R but with ULC Listing (B350LPA base included). H355HT Intelligent high -temperature thermal detector (B350LP base included). H355HTA Same as H355HT but with ULC Listing (B350LPA base included). RA400Z(A) Remote LED. Mounts to a single -gang box. B350LP(A) Plug-in detector base (included). Dimen- sions: 6.1" (15.5 cm). Mounting: 4.0" (10.16 cm) square box with or without plastic ring, 4.0" (10.16 cm) octagonal box, 3.5" (8.89 cm) octagonal box, or single -gang box. All mount- ing boxes have a minimum depth of 1.5" (3.81 cm). M02-04-00 Test magnet. B224RB(A) Plug-in System Sensor relay detector base. Diameter: 6.2" (15.75 cm). Mounting: 4.0" (10.16 cm) square box with or without plastic ring, 4.0" (10.16 cm) octagonal box, or 3.5" (8.89 cm) octagonal box. All mounting boxes have a minimum depth of 1.5" (3.81 cm). B224BI(A): Intelligent isolator base. Isolates SLC from loop shorts. B501BH(A) Plug-in System Sensor sounder detector base. Diameter: 6.0' (15.24 cm). Mounting: 4.0" (10.16 cm) square box with or without plastic ring. Mounting box has a minimum depth of 1.5" (3.81 cm). B501BHT(A)Same as B501BH(A), but includes temporal sounder.. Accessories: RA400Z(A) Remote LED annunciator. 3 - 32 VDC. Fits U.S. single -gang electrical box. For use with 8501(A) and B350LP(A) bases only. SMK400 Surface mounting kit provides for entry of surface wiring conduit. For use with 8501(A) base only. RMK400 Recessed mounting kit. For use with B501(A) base only. M02-04-01 Test magnet. XR-2 Detector removal tool. Allows installation and/ or removal of detector heads from bases in high ceiling applications, XP-4 Extension pole for XR-2, Comes in three 5-ft. (1,524 m) sections, DF-52130:A • E-350 da 001111111111111110 • 0111010000010 j 111010 n Pf j 0 rof CMF and CRF Series Addressable Control and Relay Modules General CMF-300 Control Module: The CMF-300 Addressable Con- trol Module provides Fire•Lite intelligent control panels a circuit for Notification Appliances (horns, strobes, etc.). Addressabil- ity allows the CMF-300 to be activated through panel program- ming, on a select (zone or area of coverage) basis. CRF-300 Relay Module: The CRF-300 Addressable Relay Module provides the system with a dry -contact output for acti- vating a variety of auxiliary devices, such as fans, door hold- ers, dampers, control equipment, etc. Addressability allows the dry contact to be adivated through panel programming, on a select basis. LiteSpeedTm is a communication protocol developed by Fire•Llte Engineering that greatly enhances the speed of com- munication between analog intelligent devices. Intelligent devices communicate in a grouped fashion. If one of the devices within the group has new information, the panel CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of other designs. Features • Built-in type identification automatically identifies these devices to the control panel. • Internal circuitry and relay powered directly by two -wire SLC loop. The CMF-300 module requires power (for horns, strobes, etc.). • Integral LED "blinks" green each time a communication is received from the control panel and turns on in steady red when activated. • High noise immunity (EMF/RFI). • The CMF-300 may be used to switch 24-volt NAC power. • Wide viewing angle of LED. • SEMS screws with clamping plates for wiring ease. • Direct -dial entry of address 01— 159 for MS-9600, 01 — 99 on MS-92000DLS and MS-9050UD. Applications The CMF-300 is used to switch 24 VDC audibleMsual power. The CRF-300 may be programmed to operate dry contacts for door holders, Air Handling Unit shutdown, etc., and to reset four -wire smoke detector power. Construction • The face plate is made of off-white Noryl®. • Controls include two rotary switches for direct -dial entry of address (01-159). • The CMF-300 is configured for a single Class B (Style Y) or Class A (Style Z) Notification Appliance Circuit. • The CRF-300 provides two Form-C dry contacts that switch together. IMMEAMMIMMUMMEMMOMMINIMMONE � 7u> >o nm i�� � ti r �ii i i v i mn�n� �ma� m����nsmrmm�ni�iusmrnmrvmi�uniuwMmNIumitimMmESSEEumitirvEEMENENR .LI _ ,wAL S by Honeywell III O 90 6789 8 35CI 12 , 2 i 13 % TENs 0 1514 67 `9 3 40 ONES 0 LOOP ADDRESS U U CMF-300 Module (see wiring diagram Fig. 5 for CRF-300) III lop 1 2 3 4 U ul�rllll�lldiii Operation Each CMF-300 or CRF-300 uses one of 159 possible module addresses on a SLC loop. It responds to regular polls from the control panel and reports its type and status, including the open/normal/short status of its Notification Appliance Circuit (NAC). The LED blinks with each poll received. On command, it activates its internal relay. The CMF-300 supervises Class B (Style Y) or Class A (Style Z) notification or control circuits. NOTE: Open/short supervision is suspended with the CRF-300. Upon code command from the panel, the CMF-300 will discon- nect the supervision and conned the external power supply in the proper polarity across the load device. The disconnection of the supervision provides a positive indication to the panel that the control relay actually turned ON. The external power supply is always relay isolated from the communication loop so that a trouble condition on the external power supply will never interfere with the rest of the system. Rotary switches set a unique address for each module. The address may be set before or after mounting. The built-in TYPE CODE (not settable) will identify the module to the con- trol panel, so as to differentiate between a module and a sen- sor address Specifications for CMF-300 Normal operating voltage: 15 to 32 VDC. External supply voltage (between Terminals T3 and T4): maximum 80 volts (RMS or DC). VumINEIRMi6Mi9mPoitiva hASIMEN'aIER Ri%�k�Vl�lltll�l%OIMIN��1G�01%V�01f�VXNYNnmOYN.�IN419�M191�Ni0NNlC"ONNgI%4MAti9IIIIIII16Vg11�nXI�OiNtiNIWB@VllIIY�li1fii1111�O1NNII�IN'�i1f�S1ifi9�IlmNll1ll6n11ffiN�OV�IIIXm'WO�I0�99�IIIIV DF 52130 A • 6/11 /07 -- Page 1 d 4 using/in RELAY CONTACT RATINGS nr • M1� '>l • EOL resistance: 47K ohms. Temperature range: 32°F to 120°F (0°C to 49°C). Humidity range: 10% to 93% non -condensing. Dimensions: 4.5' (114.3 mm) high x 4" (101.6 mm) wide x 1.25' (31.75 mm) deep. Mounts to a 4' (101.6 mm) square x 2.125' (53.975 mm) deep box. Specifications for CRF-300 Normal operating voltage: 15 to 32 VDC. fy%rr/na lie„li,i/ ;,,, EOL resistance: not used. Temperature range: 32°F to 120°F (0°C to 49°C). Humidity range: 10% to 93% non -condensing. Dimensions: 4.5" (114.3 mm) high x 4' (101.6 mm) wide x 1.25' (31.75 mm) deep. Mounts to a 4" (101.6 mm) square x 2.125• (53.975 mm) deep box. % iii;uWa Mounting Diagrams Note CB500 Module Barrier, which creates isolated quadrant, FOR BOTH CMF-300 AND CRF-300 MODELS LoadDescription Application Maximum voltage Current Rating Resistive Non -Coded 30 VDC 3.0 A Resistive Coded 30 VDC 2.0 A Resistive Non -Coded 110 VDC 0.9 A Resistive Non -Coded 125 VAC 0.9 A Inductive (UR=5ms) Coded 30 VDC 0.5 A Inductive (L/R=2ms) Coded 30 VDC 1.0 A Inductive (PF=0.35) Non -Coded 125 VAC 0.5 A Agency Listings and Approvals In some cases, certain modules may not be listed by certain approval agencies, or listing may be In process. Consult fac- tory for latest listing status. • UL: S2424 • ULC: CS3965 • FM Approved • CSFM: 7300-0075:185 • MEA: 72-01-E PRODUCT LINE INFORMATION CMF-300: Intelligent Addressable Control Module. CRF-300: Intelligent Addressable Relay Module. SMB500: Optional Surface -Mount Backbox. CB500: Control Module Barrier — required by UL for separat- ing power -limited and non -power limited wiring in the same junction box as CMF-300. o1vuxlxlw1nnau1u1ummoIMnvxivmNISMINNhUMMi MMunERyunEMBIMIin'irU Vrw,9nfiMINESSmiun!UuuPINUMMiNSIUNmaosMItioAIoaNmMMUiNNst'✓uduiu Page 2 of 4 — DF-52130:A • 6/11/07 CAUTION DE -ENERGIZE UNIT PRIOR TO SERVICING IIIN1IM11N17i,I9ISNN6YVXtl10YiNiflMYdLM1MAIMOSMllhmi11011SIN110110UM1116YwU19H1QrgNniYHiNM1@4VpW6VNri6RMIUMUIIMMVSEANItl 11NVAP NiRIWwR;,\\\91h1Nh1YONMERIDENt Pi%191 s ilk 04, 1410 Wiring Diagrams The following wiring diagrams are provided: 1. CMF-300: Typical notification appliance circuit configuration, NFPA Style Y. 2. CMF-300: Typical fault -tolerant notification appliance circuit configuration, NFPA Style Z. 3. CRF-300: Relay module wiring diagram. Figure 1 CMF-300 Typical notification appliance circuit configuration, NFPA Style Y. • Connect modules to Listed compatible Fire•Lite control TO Next panels only. Device • All wiring shown is supervised and power limited. 47K EOL Resistor • Module polarities are ELR-47K shown in alarm. UL listed EOL Relay shown energized 24 VDC coil 672441 wnt EOLR-1 (+) (+) • TO NEXT control module or EOL Relay. • ONE RELAY REQUIRED for each circuit. • Some control panels have the RELAY BUILT IN and do not require external wiring. Rater to the manual. Communication Line 32 VDC max. Refer to panel documentation for type of cable required. FROM Panel or Previous Device 24 VDC Circuit /DO NOT LOOP wire on terminals 3 8 4. Break wire to provide supervision of connections Power Supply: Isolated, regulated, power -limited per NFPA 70. • Listed for fire protection with battery backup. CMF-300 Typical fault -tolerant notification appliance circuit configuration, NFPA Style Z. • Connect modules to Listed compatible Fire•Lite control panels only. • All wiring shown is supervised and power limited. • Module polarities are shown in alarm. EOL Resistor Is internal at terminals 8 8 9 UL listed EOL Relay shown energized 24 VDC coil 672442 wnd EOLR-1 CRF-300 Relay module wiring diagram. • Connect modules to Listed compatible Fire•Lite control panels only. • Module does NOT supervise controlled circuits. Communication Line 32 VDC max. Refer to panel documentation for type of cable required. FROM Panel or Previous 0011,1111,01. Device 24 VDC Circuit DO NOT LOOP wire Ell on terminals 3 8 4 Break wire to provide: supervision of connections ICI I`Yl — (+) (+) • TO NEVI -control module or EOL. Relay. - ONE RELAY REQUIRED for each circuit. • Some control panels have the RELAY BUILT IN and do not require external wiring. Refer to the manual. RELAY COMMON 2 NORMALLY CLOSED 2 NORMALLY OPEN 2 RELAY COMMON 1 NORMALLY CLOSED 1 144445 wnt Power Supply' • Isolated, regulated, power -limited per NFPA 70. • Usted for fire protection with battery backup. CommunkaHon Line 32 VDC maximum. Refer to panel documentation for type of cable required,. uiyuw�mow �ir�miwmmmti�mvemN oMounMiNI iiurry � R1�n�YNMU �(�I�PThNIWIN�OIIIOMIIIWN�I�l�S1Wl1Y�N1Yd'INNIYNnmMolllf�@i llWX1I111llllllllllMINVlt111fiIIIIIIIm9r1RMINIMINIMtlP1fi11NINNEMOMMI16MPoWNk1MVy1tMYWNI'i%IIV4911INA,91'MEMENIENII1MYIpvNNIMIpflYdKNBIttM'WEUIYNU6IWNIXININININIIMMEfMYfilul}p}gpyNhNIIPIp01kYMWiIN DF-52130 A • 6/11 /07 -- Page 3 of 4 l� DF-52121:A • E-325 =r0 • 411111(111(1111111 • • 1r �16 • l • 11l) f) MMF-300(A) Series/ MDF-300 Addressable Monitor Modules General Four different monitor modules are available for Fire•Lite's intelligent controls to suit a variety of applications. Monitor modules are used to supervise a circuit of dry -contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two -wire smoke detectors (MMF-302). MMF-300 is a standard -sized module (typically mounts to a 4' [10.16 cm] square box) that supervises either a Class A (Style D) or Class B (Style B) circuit of dry -contact input devices. MMF-301 is a miniature monitor module (a mere 1.3' (3.302 cm) H x 2.75- (6.985 cm) W x 0.5' (1.270 cm) D) used to supervise a Class B (Style B) circuit. Its compact design allows the MMF 301 to often be mounted in a single -gang box behind the device it's monitoring. MMF-302 is a standard -sized module used to monitor and supervise compatible two -wire, 24 volt, smoke detectors on a Class A (Style D) or Class B (Style B) circuit. MDF-300 is a standard -sized dual monitor module used to monitor and supervise two independent two -wire initiating device circuits (IDCs) at two separate, consecutive addresses in intelligent, two -wire systems. LiteSpeedn' is a communication protocol developed by Fire•Lite Engineering that greatly enhances the speed of com- munication between analog intelligent devices. Intelligent devices communicate in a grouped fashion. If one of the devices within the group has new information, the panel CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of other designs. MMF-300 Monitor Module • Built-in type identification automatically identifies this device as a monitor module to the control panel. • Powered directly by two -wire SLC loop. No additional power required. • High noise (EMF/RFI) immunity. • SEMS screws with clamping plates for ease of wiring. • Direct -dial entry of address: 01 — 159 on LiteSpeed sys- tems, 01 — 99 on CLIP systems. • LED flashes green during normal operation (this is a pro- grammable option) and latches on steady red to indicate alarm. The MMF-300 Monitor Module is intended for use in intelligent, two -wire systems, where the individual address of each mod- ule is selected using the built-in rotary switches. It provides either a two -wire or four -wire fault -tolerant Initiating Device Cir- cuit (IDC) for normally -open -contact fire alarm and supervisory devices. The module has a panel -controlled LED indicator. The MMF-300 can be used to replace M300 modules in exist- ing systems. MMF-300 APPLICATIONS Use to monitor a zone of four -wire smoke detectors, manual fire alarm pull stations, waterflow devices, or other normally - open dry -contact alarm activation devices. May also be used to monitor normally -open supervisory devices with special supervisory indication at the control panel. Monitored circuit FI - -LIT AL by Hone ell O - O MMF-300 and MMF-302 detail of MDF-300 - note "ones" addresses are 0, 2, 4, 6, 8 only may be wired as an NFPA Style B (Class B) or Style D (Class A) Initiating Device Circuit. A 47K ohm End -of -Line Resistor (provided) terminates the Style B circuit. No resistor is required for supervision of the Style D circuit. Maximum IDC loop length is 2,500 ft./762 m (20 ohms maximum). MMF-300 OPERATION Each MMF-300 uses one of 159 available module addresses on an SLC loop. It responds to regular polls from the control panel and reports its type and the status (open/normal/short) of its Initiating Device Circuit (IDC). A flashing LED indicates that the module is in communication with the control panel. The LED latches steady on alarm (subject to current limita- tions on the loop). MMF-300 SPECIFICATIONS Nominal operating voltage: 5 to 32 VDC. v rage operating current 400 pA (LED fleshing) e r EOL resistance: 47K ohms. Temperature range: 32°F to 120°F (0°C to 49°C). Humidity range: 10% to 93% noncondensing. Dimensions: 4.5• (11 43 cm) high x 4' (10,16 cm) wide x 1.25' (3.175 cm) deep. Mounts to a 4' (10.16 cm) square x 2.125' (5.398 cm) deep box. F-301 Mini Monitor Module • Built-in type identification automatically identifies this device as a monitor module to the panel, • Powered directly by two -wire FACP No additional power required, UENIMEMNIMIN ii0MINmuuRIMEmmEMMISiNorvSMumiEMmmBiNrrcoMMIMMEMEMINntinnNDErruwiRIEsiEMENEMEHnmaruEMnmoNUMMIENIMEsvM ¢aEuuhIMUusMMISItimipiunamuMEumiNiMiamMousEouA VOMImnMMIivuMn DP-52121 A • 6/11 /07 ••-- Page 1 d 6 lid 1D aft t 0 • w 191 f • High noise (EMF/RFI) immunity. • Tinned, stripped leads for ease of wiring. • Direct -dial entry of address: 01 — 159 on LiteSpeed sys- tems, 01 — 99 on CLIP systems. 141501 13 2 12 el 3 11 4 10 5 98 7 TENS ADDRESS LOOP 0 J The MMF-301 Mini Monitor Module can be installed in a sin- gle -gang junction directly behind the monitored unit. Its small size and light weight allow it to be installed without rigid mount- ing. The MMF-301 is intended for use in intelligent, two -wire systems where the individual address of each module is selected using rotary switches. It provides a two -wire initiating device circuit for normally -open -contact fire alarm and security devices. The MMF-301 can be used to replace M301 module in existing systems. MMF-301 APPLICATIONS Use to monitor a single device or a zone of four -wire smoke detectors, manual fire alarm pull stations, waterflow devices, or other normally -open dry -contact devices. May also be used to monitor normally -open supervisory devices with special super- visory indication at the control panel. Monitored circuit/device is wired as an NFPA Style B (Class B) Initiating Device Circuit. A 47K ohm End -of -Line Resistor (provided) terminates the cir- cuit. MMF-301 OPERATION Each MMF-301 uses one of 159 available module addresses on an SLC loop. It responds to regular polls from the control panel and reports its type and the status (open/normal/short) of its Initiating Device Circuit (IDC). MMF-301 SPECIFICATIONS Nominal operating voltage: 15 to 32 VDC. ng current t375 pA 9 EOL resistance: 47K ohms. Temperature range: 32°F to 120°F (0°C to 49°C). Humidity range: 109'0 to 93% noncondensing. Dimensions: 1.3" (3.302 cm) high x 2.75' (6.985 cm) wide x 0.5' (1.270 cm) deep. Wire length: 6' (15,24 cm) minimum. 0 MMF-302 Interface Module • Supports compatible two -wire smoke detectors. • Supervises IDC wiring and connection of extemal power source. • High noise (EMF/RFI) immunity. • SEMS screws with clamping plates for ease of wiring.. • Direct -dial entry of address: 01 — 159 on LiteSpeed sys- tems, 01 — 99 on CLIP systems. • LED flashes during normal operation (this is a programma- ble option). • LED latches steady to indicate alarm on command from control panel. The MMF-302 Interface Module is intended for use in intelli- gent, addressable systems, where the individual address of each module is selected using built-in rotary switches. This module allows Intelligent panels to interface and monitor two - wire conventional smoke detectors. It transmits the status (nor- mal, open, or alarm) of one full zone of conventional detectors back to the control panel. All two -wire detectors being moni- tored must be UL compatible with the module. The MMF-302 has a panel -controlled LED indicator and can be used to replace M302 modules in existing systems. MMF-302 APPLICATIONS Use the MMF-302 to monitor a zone of two -wire smoke detec- tors. The monitored circuit may be wired as an NFPA Style B (Class B) or Style D (Class A) Initiating Device Circuit. A 3.9 K ohm End -of -Line Resistor (provided) terminates the end of the Style B or D (class B or A) circuit (maximum IDC loop resis- tance is 25 ohms). Install ELR across terminals 8 and 9 for Style D application. MMF-302 OPERATION Each MMF-302 uses one of 159 available module addresses on an SLC loop. It responds to regular polls from the control panel and reports Its type and the status (open/normal/short) of its Initiating Device Circuit (IDC). A flashing LED indicates that the module is in communication with the control panel. The LED latches steady on alarm (subject to current limita- tions on the loop). MMF-302 SPECIFICATIONS Nominal operating voltage: 15 to 32 VDC. Maximum current draw: 5.1 mA (LED on). Average operating current: 270 pA (LED flashing). EOL resistance: 3.9K ohms. Extemal supply voltage (between Terminals T3 and T4): DC voltage: 18 to 28 volts power limited. Ripple voltage: 0.1 Vrms maximum. Current: 90 mA per module maximum. Requires regulated, resettable 24 VDC power. Temperature range: 32°F to 120°F (0°C to 49°C). Humidity range: 10% to 93% noncondensing, Dimensions: 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25' (3.175 cm) deep. Mounts to a 4' (10.16 cm) square x 2.125' (5.398 cm) deep box. MDF-300 Dual Monitor Module The MDF-300 Dual Monitor Module is intended for use in intel- ligent, two -wire systems. It provides two independent two -wire initiating device circuits (IDCs) at two separate, consecutive addresses. It is capable of monitoring normally open contact fire alarm and supervisory devices, or either normally open or normally closed security devices. The module has a single panel -controlled LED. NOTE: The MDF-300 provides two Class B (Style Y) IDC circuits ONLY. Gass A (Style Z) IDC circuits are NOT supported in any application, MDF-300 SPECIFICATIONS Normal operating voltage range: 15 to 32 VDC, Maximum current draw: 5.1 mA (LED on), mMMEEMIEMoMRMINIMMmmMMINIMnviNEN INNIN MU nEmxii Mm IMMEN aMmuMENIMMEiMI as iumuuamMagNIiuS1111111111V iv 1 iwiEMESSiBEMmNOMMiMMoNiMINCIiMMEwIUMINI Page 2 of 6 -• DF-52121: A • 6/11/07 CO • s 10) 4190 1r Average operating current: 750 pA (LED flashing). EOL resistance: 47K ohms. Maximum IDC wiring resistance: 1,500 ohms. Temperature range: 32° to 120°F (0° to 49°C). Humidity range: 10% to 93% (non -condensing). Dimensions: 4.5" (11.43 cm) high x 4' (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.125' (5.398 cm) deep box. MDF-300 AUTOMATIC ADDRESSING The MDF-300 automatically assigns itself to two addressable points, starting with the original address. For example, if the MDF-300 is set to address "56", then it will automatically assign itself to addresses "56" and "57". NOTE: "ones" addresses on the MDF-300 are 0, 2, 4, 6, or 8 only. Terminals 6 and 7 use the first address, and terminals 8 and 9 use the second address. CAUTION: Avoid duplicating addresses on the system. Installation MMF-300, MMF-302, and MDF-300 modules mount directly to a standard 4" (10.16 cm) square, 2.125' (5.398 cm) deep, electrical box. They may also be mounted to the SMB500 sur- face -mount box. Mounting hardware and installation instruc- tions are provided with each module. All wiring must conform to applicable local codes, ordinances, and regulations. These modules are intended for power -limited wiring only. CAUTION DE -ENERGIZE UNIT PRIOR TO SERVICING Face plate for MMF-300, MMF-302, and MDF-300 The MMF-301 module is intended to be wired and mounted without rigid connections inside a standard electrical bcx. All wiring must conform to applicable local codes, ordinances, and regulations. Agency Listings and Approvals In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult fac- tory for latest listing status. • UL: S2424 • ULC: CS3705 • FM Approved • CSFM: 7300-0075:185 • MEA: 72-01-E Product Line Information MMF-300: Monitor module. MMF-301: Monitor module, miniature. MMF-302: Monitor module, two -wire detectors MDF-300: Monitor module, dual, two independent Class B cir- cuits. SMB500: Optional surface -mount backbox. Architects'IEngineers' Specifications Specifications of these and all Fre•Lite products are available from Fire•Lite. Mounting Diagrams for standard -sized modules 1NIVOXV80NA` U6u1 wiw�yMmRIMmiiwwwmwmi i � � i i ��ti 1¢1�YF�ORIN�@IOVON�tiYImI,�N�v'uw1�111Y101ullY�lOtlAi�tliMINII�IIIP@IMmIM1911101MMtlIMnNINi9R@IIRIVII19FIINIIIgIPdI1am00!w9Bd@IIkN�IpVA�iVdI�7i1gRW;,WIII61Yiwll!�wRIHhIIIR000mflMN�iwIQ�Y;�M1W1�9dIhYOV�190MNIOHIpI�1N1�11�9`�Ip9�INlppii UwH11110V1wINF1=110111\wMMAII.mY.M.N,VWION..H.21NINONWMNIVYpw&IXI&WiMOVOVMNNNV4iNMNNXRIIWOMV010WID DF-52121: A • 6/11 /07.. Page 3 of 6 110 • 01,0 Wiring Diagrams The following wiring diagrams are included: 1. MDF-300: Typical dual two -wire Style B initiating device circuit configuration. 2. MMF-301: Typical two -wire Style B initiating device circuit configuration. 3. MMF-300: Typical two -wire initiating circuit configuration, NFPA Style B. 4. MMF-300: Typical four -wire fault -tolerant initiating circuit configuration, NFPA Style D. 5. MMF-300: Typical two -wire initiating circuit configuration for security systems (with alarm versus short capability). 6. MMF-302: Interface two -wire conventional detectors, NFPA Style B. 7. MMF-302: Interface two -wire conventional detectors, NFPA Style D. 8. CRF-300: Relay control module used to disconnect a power supply. Figure 1 MDF-300 Typical dual two -wire Style B initiating device circuit configuration. Two Initiating Device Circuits (L & H) TO Next each powertimited to Device + \ (- 230 pA max. @ 12 VDC max. 47K EOL Resistor ELR-47K 47K EOL Resistor ELR-47K FROM Panel or Previous Device Communication Line 32 VDC maximum. Twisted -pair is recommended. • All shown wiring Is supervised and power limited. • Connect modules to listed compatible Rie•Ute control panels only • ANY NUMBER of UL Listed contact dosure devices may be used. • DO NOT MIX fire alarm initiating, supervisory, or security devices on the same circuit. • Install contact dosure devices per manufacturer's Installation Instructions. Figure 2 MMF-301 Typical two -wire Style B initiating device circuit configuration. (+) (-) UL LISTED Compatible Control Panel BLACK I. ..m4 RED (-1(*) MMF-f 567 8810 6789 4s g6720wiil wnd 3 2 (+) (—) VIOLET ► 4 YELLOW 47K EOL INCLUDED 6720mt1 wool mSrausmwimEneuimni tiriiNMIBIEMIMIIim I i t E �ni�r��mn^n�iimvntMiewururvrrmMumiuiminNiMMEmuiMEMMUM NM uiMEMINEMBRErHu+ruMt+urvuimirMouuuuuuuuuuuuumMumMMummmMINaoMmWaUNIotMmauwnMrcunuwiduMISSIiM11i1Mo10moi25ni000M Page 4 of 6-- DF- 52121 A • 6/11 /07 NOTE: Wiring Diagrams this Page: MMF-300 • Connect modules to listed compatible Fire•Lite control panels only. • All wiring shown is supervised and power limited. • Install contact closure devices per manufacturers' installa- tion instructions. • Any number of UL-listed contact closure devices may be used. • DO NOT MIX fire alarm initiating, supervisory, or security devices on the same circuit. Figure 3 MMF-300 Typical two -wire initiating circuit configuration, NFPA Style B. Initiating Device Circuit (!DC) NFPA Style B, power limited: 230 pA max. t 12 VDC max. 47K EOL Resistor ELR-47K FROM Panel or Previous Device Communication Line 32 VDC maximum. Twisted -pair Is recommended. �-� Communication Loss (optional connection for panels winch support this feature) FUTURE FEATURE 6720wu2.wmr Figure 4 MMF-300 Typical four -wire fault tolerant initiating circuit configuration, NFPA Style D. ,414444444 ( EOL Resistor Is Internal at terminals 8 8 9 .40 FROM Panel or Previous Device Communication Line 32 VDC maximum. Twisted -pair Is recommended. Communication Loss (optional connection for panels which support this feature) FUTURE FEATURE 67217wid.wm1 Figure 5 MMF-300 Typical two -wire initiating circuit configuration for security systems (with alarm versus short capability). • • R� 1441144441111111111111111144463444444544 i 1 1 initiating Device Circuit (!DC) NFPA Style B, power limited: 230 pA max. @ 12 VDC max. 14K Series Resistor 47K EOL Resistor ELR-47K TO Next (—) Device 4 (+) Il�414444 144141141011004m➢uuuu0000M;'41IIINnIM4411@'fiiMri191 III IIMi"OnM ISSN Om, tll' 441M4ngIIII444=441494444441104444444415114 (+) (—) FROM Panel or Previous 4 Device Communication Line 32 VDC maximum. Twisted -pair is recommended. Communication Loss (optional connection for panels which support this feature) FUTURE FEATURE 6720wn4 wmr MVYhV1'MMMMOIIMIIIIIIIIIIINO414411IIIINN4uI%tiritiNMri14441 41141rin 01641444riIIIIIIO0IIIIIIIIIlm101444441rIP:.womllMtl61=41IIIN V!1401'MN'MV9MPIINIINIINIINII41141NMwINl@ilwlNNhfiiMMi , VMMI'v M DF-52121: A • 6/11 /07 -- Page 5 of 6 YF 11111111110 181) 00) • NOTE: Wiring Diagrams this Page: MMF 302 and CRF-300 • Connect modules to listed compatible Fire•Lite control panels only. • Terminal wiring must be power limited. • DO NOT MIX fire alarm initiating, supervisory, or security devices on the same circuit. • DO NOT LOOP wire under terminals. Break wire run to provide supervision of connections. • Detectors must be UL listed compatible with module. • Install detectors per manufacturers' installation instruc- tions. • Power to the interface module must be externally switched to reset the detectors. An CRF-300 relay control module can be used to switch power from a standard power supply; see Fig. 7 below. Figure 6 MMF-302 Interface two -wire conventional detectors, NFPA Style B. TO Next Device 3.9K EOL Resistor (included) A2143-10 FROM Panel or Previous Device Communication Line 32 VDC maximum. Twisted -pair is recommended. Listed Battery Backup switched DC power supply. - Option! Branch Circuft TO Next Interface Module Module supenrises supply voltage and detector loop. 6720wu5 win! Figure 7 MMF-302 Interface two -wire conventional detectors, NFPA Style D. 3.9K EOL Resistor (included) required at terminals 8 & 9 A2143.10 () ■ FROM Panel or Previous Device Communication Line 32 VDC maximum. Twisted -pair is recommended. Listed Battery Backup switched DC power supply. Option! Branch Circuit TO Next Interface Module Module supervises supply voltage and detector loop. Figure 8 CRF-300 Relay control module used to disconnect a power supply. TO Next Device DC POWER SUPPLY (+)" Listed for Fite (—) Protection with Battery Backup 6700en7. end 6720wip0 wool FROM Panel or Previous Device Communication Line 32 VDC maximum. Twisted.paar re recommended. LiteSpeedTM''is a registered trademark d Honeywell International I'nc C2007 by Haneywelt' International Inc Alt rights reserved Unauthollzed use d this document is stripy prohibited ME ttltittVll@ttt9ulttt1111iHtNTtlRi mloFlTMM. 31021 ME MCC C002 WLutli4tt1Ill1122011011i1ttfltalia»3»tG19t1�0aalttBtMBItYPttNwllVukTl!tt0IIT1TM111111111111WSOpltiataaolttSt tNntIM91N>tNtlfl ISM This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice, For more information, contact Fire•Lite Alarms. Phone (800) 6273473, FAX: (877) 699-4105. www,firelite.00m ISO 9001 E R -rivic MEM II QOALITT SYSTEMS NOM MadeintheUS.A 1mmwmtiu011urmum11rrnum� v ma 01m1d00INNN77NpV0VhMQU=6006I6066M660@l01tt'UXHi';tiiiWW, IOIVfi41MmI1091111116T011➢IImIl06tiV11unI17NNMNf16i0001MfiiWO6616066YANYi600VIM600M6066M71016NY01V20timy;6lkVl",06PSVIIWIVl1WM'IN6CI!MII(00MIMIM0MIIflO0=IIpYI66Ui0kNlYiripV1111iINY7101I41i126111111hIP106MdRSINAIW01%I601pM6IIhYINryp11fYYIIlOPI61111064YM19nIIM00M1101660dry Page 6 of 6 -- DE-52121 A • 6/11/07 ilk 110 r • 1111111111111111 11,11,111111111 40,1 omn oa e Selectable Output Horns, Strobes, and Horn/Strobes SpectrAlerr Advance selectable -output horns, strobes, and horn/strobes are rich with features guaranteed to cut installation times and maximize profits. The SpectrAlert Advance series of notification appliances is designed to simplify installations, with features such as plug in designs, instant feedback messages to ensure correct installation of individual devices, and 11 field -selectable candela settings for wall and ceiling strobes and horn/strobes. When installing Advance products, first attach a universal mounting plate to a four -inch square, four -inch octagon or double -gang junction box.The two -wire mounting plate attaches to a single -gang junction box. Next, connect the notification appliance circuit wiring to the SEMS terminals on the mounting plate. Finally, attach the horn, strobe or horn/strobe to the mounting plate by inserting the product's tabs in the mounting plate's grooves.The device will rotate into position, locking the product's pins into the mounting plate's terminals.The device wiil temporarily hold in place with a catch until it is secured with a captured mounting screw. The SpectrAlert Advance series includes outdoor notification appliances. Outdoor strobes and horn/strobes (two wire and four wire) are available for wall or ceiling. Outdoor horns are available for wall only. All System Sensor outdoor products are rated between minus 40 degrees Fahrenheit and 151 degrees Fahrenheit in wet or dry applications. �llllli 111111 mi 1:9I 11 11111111 1u Features IIIOt 110 • Electrically compatible with existing SpectrAlert products • Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela • Plug-in design • Field selectable candela settings on wall and ceiling units: 15, 15/75, 30, 75, 95,110,115,135,150,177,185 • Same mounting plate for wall and ceiling -mount units • Shorting spring on mounting plate for continuity check before installation • Tamper resistant construction • Outdoor wall and ceiling products rated from -40"F to 151 "F • Design allows minimal intrusion into the back box • Horn rated at 88+ dbA at 16 volts • Rotary switch for horn tone and three volume selections • Outdoor products UL listed to UL 1638 (strobe) and UL 464 (horn) outdoor requirements • Outdoor products NEMA 4X rated • Compatible with MDL sync module Agency Listings SISNAUNO 0 USTED SaOv s'1$ 91 APPROVED approved MEA451,65 IF. 7025-165b B861dndoor eeiubt,e11 ' .1,11 S.1653�: B87 (ou¢daor sula se4 125465$ ties 111eaamroOSBo be, ch1melarobe$1 7135, 86531. B89 (hom, ,h1me,B1 • 10111111111111111, • i SpectrAlert Advance Specifications SpectrAlert Advance homs, strobes and horn/strobes shall mount to a standard 4 x 4 x 1 Vz-inch back box, 4-inch octagon back box or double -gang back box Two -wire products shall also mount to a single -gang 2 x 4 x 17/winch back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance products, when used with the Sync•Circuit` Module accessory, shall be powered from a non -coded notification appliance drcuit output and shall operate on a nominal 12 or 24 volts When used with the Sync•Circuit Module, 12-volt rated notification appliance circuit outputs shall operate between nine and 175 volts; 24-volt rated notification appliance circuit outputs shall operate between 17 and 33 volts. Indoor SpectrAlert Advance products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC, or full -wave rectified, unfiltered power supply. Strobes and horn/strobes shall have field •••selectable candela settings including 15,15/75, 30, 75,95,110,115,135,150,177,185. Strobe The strobe shall be a System Sensor SpectrAlert Advance Model listed to UL 1971 and shall be approved for fire protective service. The strobe shall be wired as a primary• -signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. mntn/Stro Combination The horn/strobe shall be a System Sensor SpectrAlert Advance Model listed to UL 1971 and UL 464 and shall be approved for fire protective service. The horn/strobe shall be wired as a primary -signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobes entire operating voltage range.The strobe light shall consist of a xenon flash tube and associated lens/reflector systemThe hom shall have three audibility options and an option to switch between a temporal three -pattern and a non -temporal (continuous) pattem.These options are set by a multiple position switch. On four -wire products, the strobe shall be powered independently of the sounder.The horn on hom/strobe models shall operate on a coded or non -coded power supply. Outdoorw.,auras SpectrAlert Advance outdoor homs, strobes and horn/strobes shall be listed for outdoor use by UL and shall operate between minus 40 degrees and 151 degrees Fahrenheit The products shall be listed for use with a System Sensor outdoor/weatherproof back box with half inch and three -fourths inch conduit entries Sync hrun n a mode The module shall be a System Sensor Sync•Circuit model MDL listed to UL 464 and shall be approved for fire protective service. The module shall synchronize SpectrAiert strobes at 1 Hz and homs at temporal three Also, while operating the strobes, the module shall silence the homs on hom/strobe models over a single pair of wiresThe module shall mount to a 411/16 x 4°/as x 21/a-inch back box The module shall also control two Style Y (class B) circuits or one Style Z (class A) circuitThe module shall synchronize multiple zones. Daisy chaining two or more synchronization modules together will synchronize all the zones they control. The module shall not operate on a coded power supply. 01111111111111101111l1lIllil01111111111111111101111 1111111111111111U1 111,111111 � U11'11 011,111111111m �!� 0411111 'iln�il ?ff�III 1 111111 ;III l l 1 111111111 III Stan 32°F to 120°F (0°C to 49°C) K Series glen ntmmme -40°F to 151 °F (-40°C to 66°C) tairriity Rant 10 to 93% non -condensing (indoor products) S eimas 1 flash per second i4, rvrinai Regulated 12DC/FWR or regulated 24DC/FWR° 8 to 175 V (12V nominal) or . b„' ,, " 12 to 18 AWG Geltmwg Firvo mt dtkmoensiorw (innduding lens) mount ditrmams FOLK la) 6.8"diameter x 25" high (173 mm diameter x 64 mm high) 5.61x4.7Wx250(142mmLx119mmWx64mmD) Hum tharierm; 5.61x4.7"Wx 131)(142 mm L x 119mmWx 33 mm D) aunt back rt dirneuvsi'ons (885-2, 5.91x5.0"Wx221D(151 mm L x 128 mmWx 56mm D) CiRimnO rmwt+n,un iu 8f SCW-2) 7.1 "diameter x 225" high (180 mm diameter x 57 mm high) Wad mount mrra 5.71x5.1"Wx2.0"D(145mmLx130mmWx51 mm D) 11g-rnour1? eathemprn ratans (SA» 7.1 "diameter x 2.0" high (180 mm diameter 51 mm high) kNrftsm 1. Full Wave Rectified (FWR) voltage is a non -regulated, time varying power source that is used on some power supply and panel outputs 2. P 5, PC, and SC products will operate at 12V nominal only for 15 and 15/75 cd AM-0MS-004 1#) 01) IP 0001v1 ,4) UL Current Draw Data titomalx.1%tin04111111 01,411A 14i 1111111111 11111111, 111111 11111,1111111111111111111,11,11, III 11111111111 li-117_5 Vohs GuideDC Snda ilP 123 (and High Candela Flange 15/75* 142 30* NA 75* NA 95* NA 110 NA 115 NA 135 NA 150 NA 177 NA 185 NA 128 148 NA NA NA NA NA NA NA NA NA flos 77 94 158 181 202 210 228 246 281 286 71 81 96 153 176 195 205 207 220 251 258 1111911,11164o)5, rime1411rOill uiurn Sound Piattern Temporal Temporal Temporal Non -temporal Non -temporal Non -temporal Coded Coded Coded dB High Medium Low High Medium Low High Medium Low s 16-33 Volts DC FV401 57 55 44 49 38 44 57 56 42 50 41 44 57 55 44 51 40 46 DC 69 58 44 69 60 50 69 56 52 75 69 48 75 69 50 75 69 50 .00001100 100001 l'6101..1111P01(14114110111111illtir 41j111FititOlii,1111111 4 mill$ 1441)011111111111111,111111111111111111,11111111111111,111111111111,1111111,1111111111111111111111110111111111111111.111,111,11.11141.1q11.11,01111111111110;lidlimm11111111111111.111111111111111 In I Temporal Medium Temporal Low Non -temporal High Non -temporal Medium Non -temporal Low input 7.5 Volts 16-33 V.11 15 15/75 15 95 NM 1' Si 75 tiggA 75 137 147 01 90 194 132 144 69 80 97 157 182 132 143 66 77 93 154 179 141 152 91 100 116 176 201 133 145 75 85 102 163 187 131 144 68 79 96 156 182 110 212 201 198 221 207 201 115 218 210 207 229 216 210 Temporal High Temporal Medium Temporal Low Nod temporal High Non -temporal Medium Non1emporal Low 136 129 129 142 134 132 155 152 151 161 155 154 88 78 76 103 85 80 97 88 86 112 95 90 iM •„10iNfclill10"11':1;111011011i110'111•:""11"111"1111111011!,1010110.,160.1..1.1..„........„...„!,,,..,... 112 103 101 126 110 105 168 160 160 181 166 161 190 184 184 203 189 184 210 202 194 221 208 202 218 206 201 229 216 211 1111C01111111111 01111111111111111111111111111 111111111111111111111111111111111111,111111111111111111111111111.11, 11.111 111,11,111,1111 111111 1111111 ii11111111111 11 11 11 DC lop t Temporal High Temporal Medlum Temporal Low Non -temporal High Non -temporal Medium Non -temporal Low 135 150 177 245 259 290 297 235 253 288 297 232 251 282 292 255 270 303 309 742 259 293 299 238 254 291 295 thp t Temporal High Temporal Medium Temporal Low Non -temporal High Non Medium Non -temporal Low 135 150 177 215 231 258 209 224 250 207 221 248 233 248 275 219 232 262 214 229 256 las 265 258 256 281 267 262 Candela Derating For K series products used at low temperatures, listed candela ratings must be reduced in accordance with this table. 311(1114%e Out pull IJt andela Qdea 15 _15/75 30 75 Do not use below 32/ 44 95 110 115 135 150 177 70 110 115 Horn Tones and Sound Output Data 1 ern a ncilfileriN St ro e -1705 Switch Volts Mod Sound Pattern dB DC 24 Volt Noon Reverberant DC „chat 88 99 98 96 84 96 92 7Coded High 82 82 88 88 93 92 101 101 135 _00„, ,....„.-0— 81 Coded Medium 78 78 85 85 90 90 97 98 150 185 185 —,„ tOrai4 tow, 78 78 VOA 84 88 2 Temporal Medium 74 74 80 80 86 86 96 Temporal Low 71 73 76 76 83 80 94 89 4 Non -temporal High 82 82 88 88 93 92 100 100 5 Non -temporal Medium 78 78 85 85 90 90 98 98 6 Non -temporal Low 75 75 81 81 88 9' Coded Low 75 75 81 81 88 85 96 92 Settings 7, 8, and 9 are not available on 2-wire hom/strobe AOS-0395-001 0 • 1� 141) s 1 SpectrAlert Advance Dimensions 1 5.98' •-5.05'--y r2.23�y I Wall Gw ckxs 56' /Stlra es 1.-2.251 Dia. c-- Ceiling Iback box skirt SpectrAlert Advance Ordering Information 111, 1111111111111 iriaill1.110.1mIIIIIIIIIIIII111111111111111111111111104111�1 P2R*t 2-wire Horn/Strobe, Standard cd*, Red P2RH* 2-wire Horn/Strobe, High cd, Red P2RK*° 2-wire Horn/Strobe, Standard cd, Red, Outdoor P2RHK° 2-wire Horn/Strobe, High cd, Red, Outdoor P2W* 2-wire Horn/Strobe, Standard cd, White P2WH* 2-wire Horn/Strobe, High cd, White P4R* 4-wire Horn/Strobe, Standard cd, Red P4RH* 4-wire Horn/Strobe, High cd, Red P4RK' 4-wire HorNStrobe, Standard cd, Red, Outdoor P4RHI' 4-wire Horn/Strobe, High cd, Red, Outdoor P4W* 4-wire Horn/Strobe, Standard cd, White P4WH* 4-wire Horn/Strobe, High cd, White Vie st'a s SR*' Strobe, Standard cd, Red SRH*t Strobe, High cd, Red SRK° Strobe, Standard cd, Red, Outdoor SRHK Strobe, High cd, Red, Outdoor SW* Strobe, Standard cd, White SWH* Strobe, High cd, White t°:ellin!a orniStmbes PC2R* 2 wire Horn/Strobe, Standard cd, Red PQRH* 2-wire Horn/Strobe, High cd Red 6.8' Dia. 1 �J Wall weather roof back box 1101111,11,1111,11111 Ceiling weatherpr dabox PC2W*t 2-wire Hom/Strobe, Standard cd, White PC2WH*' 2-wire Horn/Strobe, High cd, White PC4R 4-wire HorNStrobe, Standard cd, Red PC4RH 4-wire HorNStrobe, High cd, Red PC4RK 4-wire HorNStrobe, Standard cd, Red, Outdoor PC4RHK° 4-wire HorNStrobe, High cd, Red, Outdoor PC4W 4-wire Hom/Strobe, Standard cd, White PC4WH 4-wire Horn/Strobe, High cd, White St SCR* SCRH* SCRIM SCRHIC SCW° SCWH*' Strobe, Standard cd, Red Strobe, High cd, Red Strobe, Standard cd, Red, Outdoor Strobe, High cd, Red, Outdoor Strobe, Standard cd, White Strobe, High cd, White HR Hom, Red HRK' HW Hom, Red, Outdoor Hom, White Accesscxie BBS-2 Back Box Skirt, Wall, Red BBSW-2 Back Box Skirt. Wall, White PCZRK" 2-wire Horn/Strobe, Standard cd, Red, Outdoor BBSC 2 PC2RHK° 2-wire Horn/Strobe, High cd, Red, Outdoor Back Box Skirt, Ceiling, Red BBSCW-2 Back Box Skirt, Ceiling, White * Add '-P'to model number for plain housing (no TIRE marking on cover), e.g.„ P2R-P 1 Add'-SP'to model number for"FUEGO' marking on cover, e.g., P2R SP # "Standard cd"refers to strobes that include 15,15/75, 30, 75, 95,110, and 115 candela settings"High cd." refers to strobes that include 135, 150,17/, and 185 candela settings All outdoor units ending in le Include a weatherproof back box. D Add "-R'to model number for weatherproof replacement device (no back box included). 3825 Ohio Avenue • St is harfes, IL 60i 74 Phone: 800 SENSOR2 • Fax 630 377-6495 WOOS System Scream. AnductspActm„x050As+tAe twahengp weirlom nrAkeMgt tysvicamr turna555 d.41111lM i, oductt Iaobrrmabra 555155Ag.. 4IR! Meg 05500A 0155 ;d:ra5055c0 A05,5595-$ R. VOAoW'b75A • NI re ll r • s reed Irk ini- orns The SpectrAlerr Advance series of mini -horn sounders are designed to simplify installations to provide primary and secondary signaling for fire and security applications. Features • 12 and 24V operation • High and low volume settings •Temporal and non -temporal tones • Mounts to single gang back box • Compatible with MDL sync module • Mechanically and electrically compatible with PA400 series Mine -Alert' sounders encyr Listings LISTED APPROVED ¢stw0mo approved "irgammakrt- -"nrrergrxemr,"' !r d1 001,1 , G'1N ' 7J " ltlMrrl10,1Y71 The MHR and MHW mini -horns operate at 12 and 24 volts and are ideal for hotel, motel or residential fire system applications, where a smaller notification device is desired. E he mini -horns offer high and low volume settings, and temporal or non -temporal tones. The horns can be mounted to single gang back boxes for aesthetically sensitive applications. Synchronization is also provided when using the MDL module The MHR and MHW mini -horns can operate between 32 and 120 degrees Fahrenheit from a regulated DC or full wave rectBfied,. unfiltered power supply.They are lasted rco Underwriter's Laboratories Standard UL 464 for fire protective signaling systems. s L s a i 1140 IVY • • ICI v 11) Ito 1 t41 SpectrAiert' Advance Mini -Horn Specifications Ql,una flr , 1 i 1,:„ "° 1 old P; ;mhl 1,i, I LII r % l 0" IJ,dyJ 1'8 tl f orll I t ii;a m,N � 1 �r y Uk1e ()I➢�i „u,!?J ,,i I��V 4 i, (�I{ III (t i) -,ti 6 1 a l , of '''''' 1,,„,, �I11�I�N,Nr:"��,�I,..,I,Illrrl�19I1d,,,'((.((m,(7"�l(;;(�kG??°(;IJfl��I��a41��ll;(flllr��Y�il�%;:f Mini -horns shall be a System Sensor Model MHR or MHW capable of operating at nominal 12 or 24VDC and shall mount to a single gang back box, Mini - horn shall be listed to Underwriter's Laboratories Standard UL464 for fire protective signaling systems Mini -horns shall operate between 32 and 120 degrees Fahrenheit from a regulated DC, or full -wave rectified, unfiltered power supply. When used with the Sync -Circuit" Module, 12volt rated notification appliance circuit outputs shall operate between nine and 17.5 volts; 24-volt rated notification appliance circuit outputs shall operate between 17 and 33 volts. dI „ I�I141011��4��� ����U�l�d�ttiN111111��,>J�Pul��r�����?G��(����I����lr�rr��I{�(11���. III1lhll0nl11, ll, DimertOons III I��ryI !!1 I1 ill1l11111111111t, II?�%PUD� 4.61x2.91Wx.45D 9 2.67oz. Qi per ;zing ll'eorenlp:l ,Mastute N u ua 32°F to 120°F (0°C to 49°C) Momrinitrtuwgl Surface: single -gang back box Flush 4" x 4"BBD deep back box (2W deep) 12 to 18 AWG Regulated 12DC/FWR or regulated 24DC/FWR 9-33 UL Sound Output and Current Draw Data II fI 61111411 I�aI �I � �«�WllJJ 1,1111111110111 �, I IIfllAIUi1�1IIJ!7 �l!IfIlIJ N �I I II�( (J; ur�r(�„ Il1l((f ((, Switch !Setting Pattern 2 Temporal 3 Non -temporal 4 Non-tempora' Ouitput. L High Low High Low 8-175 Ivy 68 66 72 70 67 65 71 69 No a 71 69 75 73 oan rMai 12 70 68 74 72 16-33 VC 081 76 80 78 76 75 79 77 1 �t � �I)�l,% 1,111111 111 (D1 U(�1�II1f1100flII((Ulr1h'11,111JU�il 11 l��1I(UIV1l101111111 "Il ra�,n;llt,t�tl�,l,1,lllrll,1r111nv lll�f�pr� 5wwui'tu h Post 2 S¢muv;:::.1 Pat Temporal H;gh LOW FWR 10 9 DC tali 14 v FWR 15 13 3 Non -temporal High 22 '7 29 25 4 Non -temporal Low 17 13 21 19 Ordering Information ra 1111 1 aI I11 iI rrlrl 1 u d i'II� N11 1111 11,1111111111111111111,1110DIIIIIIIIIIII 11111111111C111 11W11D1111111111,111,0101111011 D101 D �U 0 IdII 1111oIJIII, 9UllR,y U d1? �IlTUU "l1u f1� Ih V1Iftill MHR Mini -Horn, Red MHW Mini -Horn, White 3825 Ohio Avenue - St_ (Ivies, Ih 60174 Phone 800 SiNS©R2 - Fax.. 630-377- eI xb."1,+0011"Kagirmati,rwd,NV�.vp0.: kcal. ttuirtvi:lm^ 'WBr.`m..IW raflee:Aft SIIMp^a"w,Y'uB„a;Muceravv 116, c..oment pu,'Xixr WYII;,ansar'r,!sm11..,uulm,pthe .1",,, 4velawx „:IV Ths r,9aastwlml�" • lap ib • 111111111111111111111 • • 4 TABLES Table 8 Conductor Properties Conductors Direct -Current Resistance at 75°C (167°F) Stranding Overall Copper Size Area Diameter Diameter Area Uncoated Coated Aluminum (AWG or Circular ohm/ ohm/ ohm/ ohm/ ohm/ ohm/ kcmil) mm2 mils Quantity mm in. mm in. nun2 in.' km kFT km kFT km kFT 18 0.823 1620 1 - - 1.02 0.040 0.823 0.001 25.5 7.77 26.5 8.08 42.0 12.8 18 0.823 1620 7 0.39 0.015 1.16 0.046 1.06 0.002 26.1 7.95 27.7 8.45 42.8 13.1 16 1.31 2580 1 - - 1.29 0.051 1.31 0.002 16.0 4.89 16.7 16 1.31 2580 7 0.49 0.019 1.46 0.058 1.68 0.003 16.4 4.99 17.3 1 2.08 4110 1 - - 1.63 0.064 2.08 0.003 10.1 3.07 10.4 i� 2.08 4110 7 0.62 0.024 1.85 0.073 2.68 0.004 10.3 3.14 10.7 5.08 26.4 8.05 5.29 26.9 8.21 16.6 5.06 16.9 5.17 12 3.31 6530 1 - - 2.05 0.081 3.31 0.005 6.34 1.93 6.57 2.01 10.45 3.18 12 3.31 6530 7 0.78 0.030 2.32 0.092 4.25 0.006 6.50 1.98 6.73 2.05 10.69 3.25 • 10 . 5.261 10380 1 - - 2.588 0.102 5.26 0.008 3.984 1.21 4.148 1.26 6.561 2.00 10 5.261 10380 7 0.98 0.038 2.95 0.116 6.76 0.011 4.070 1.24 4.226 1.29 6.679 2.04 8 8.367 16510 1 - - 3.264 0.128 8.37 0.013 2.506 0.764 2.579 0.786 4.125 1.26 8 8.367 16510 7 1.23 0.049 3.71 0.146 10.76 0.017 2.551 0.778 2.653 0.809 4.204 1.28 6 13.30 26240 7 1.56 0.061 4.67 0.184 17.09 0.027 1.608 0.491 1.671 0.510 2.652 0.808 4 21.15 41740 7 1.96 0.077 5.89 0.232 27.19 0.042 1.010 0.308 1.053 0.321 1.666 0.508 3 26.67 52620 7 2.20 0.087 6.60 0.260 34.28 0.053 0.802 0.245 0.833 0.254 1.320 0.403 2 33.62 66360 7 2.47 0.097 7.42 0.292 43.23 0.067 0.634 0.194 0.661 0.201 1.045 0.319 1 42.41 83690 19 1.69 0.066 8.43 0.332 55.80 0.087 0.505 0.154 0.524 0.160 0.829 0.253 1/0 53.49 105600 19 1.89 0.074 9.45 0.372 70.41 0.109 0.399 ' 0.122 0.415 0.127 0.660 0.201 2/0 67.43 133100 19 2.13 0.084 10.62 0.418 88.74 0.137 0.3170 0.0967 0.329 0.101 0.523 0.159 3/0 85.01 167800 19 2.39 0.094 11.94 0.470 111.9 0.173 0.2512 0.0766 0.2610 0.0797 0.413 0.126 4/0 107.2 211600 19 2.68 0.106 13.41 0.528 141.1 0.219 0.1996 0.0608 0.2050 0.0626 0.328 0.100 250 127 - 37 2.09 0.082 14.61 0.575 168 0.260 0.1687 0.0515 0.1753 0.0535 0.2778 0.0847 300 152 - 37 2.29 0.090 16.00 0.630 201 0.312 0.1409 0.0429 0.1463 0.0446 0.2318 0.0707 350 177 - 37 2.47 0.097 17.30 0.681 235 0.364 0.1205 0.0367 0.1252 0.0382 0.1984 0.0605 400 203 - 37 2.64 0.104 18.49 0.728 268 0.416 0.1053 0.0321 0.1084 0.0331 0.1737 0.0529 500 253 - 37 2.95 0.116 20.65 0.813 336 0.519 0.0845 0.0258 0.0869 0.0265 0.1391 0.0424 600 304 - 61 2.52 0.099 22.68 0.893 404 0.626 0.0704 0.0214 0.0732 0.0223 0.1159 0.0353 700 355 - 61 2.72 0.107 24.49 0.964 471 0.730 0.0603 0.0184 0.0622 0.0189 0.0994 0.0303 750 380 - 61 2.82 0.111 25.35 0.998 505 0.782 0.0563 0.0171 0.0579 0.0176 0.0927 0.0282 800 405 - 61 2.91 0.114 26.16 1.030 538 0.834 0,0528 0.0161 0.0544 0.0166 0.0868 0.0265 900 456 - 61 3.09 0.122 27.79 1.094 606 0.940 0.0470 0.0143 0.0481 0.0147 0.0770 0.0235 1000 507 - 61 3.25 0.128 29.26 1.152 673 1.042 0.0423 0.0129 0.0434 0.0132 0.0695 0.0212 1250 633 - 91 2.98 0.117 32.74 1.289 842 1.305 0.0338 0.0103 0.0347 0.0106 0.0554 0.0169 1500 760 - 91 3.26 0.128 35.86 1.412 1011 1.566 0.02814 0.00858 0.02814 0.00883 0,0464 0.0141 1750 887 - 127 2.98 0.117 38.76 1.526 1180 1.829 0.02410 0.00735 0.02410 0.00756 0.0397 0.0121 20001013 - 127 3.19 0.126 41.45 1.632 1349 2.092 0.02109 0.00643 0.02109 0.00662 0,0348 0.0106 Notes: 1. These resistance values are valid only for the parameters as given. Using conductors having coated strands, different stranding type, and, especially, other temperatures changes the resistance. 2. Formula for temperature change: R2 = RI [1 + a (T2 - 75)] where a.,° = 0.00323, aA,, = 0.00330 at 75°C„ 3. Conductors with compact and compressed stranding have about 9 percent and 3 percent, respectively, smeller bare conductor diameters than those shown, See liable 5A for actual compact cable dimensions. 4. The IACS conductivities used: bare copper = 100%. aluminum = 61%. 5. Class B stranding is listed as well as solid for some sizes. Its overall diameter and area is that of its circumscribing circle. FPN: The construction information is per NEMA WC8- 1992 or ANSI/UL 1581.1998. The resistance is calculated per National Bureau of Standards Handbook 100. dated 1966. and Handbook 109, dated 1972. 2005 Edition NATIONAL ELECTRICAL CODE 70-635 dflp Jdi l � or �w MS-92000DLS/E Fire Alarm Control Panel Operating Instructions NORMAL - Only the GREEN A.C. POWER LED is on. All other LED's are off. LCD display will read SYSTEM ALL NORMAL. PANEL KEY - The key to open the panel can be found at the following location: WHEN AUDIBLE DEVICES ARE SOUNDING - FOR ANALARM 1. Evacuate the protected area 2. Notify the monitoring service and/or the Fire Department immediately. Tell them briefly what happened and what your current status is. Phones. Fire Department Monitoring Service 3. If the Fire Department is responding, be prepared to provide directions to arriving firefighters. FOR TROUBLE ONLY 1. Notify the monitoring service and/or Fire department if this panel is connected to either one, and tell them what is happening. 2. Silence audible devices by unlocking and opening the panel and pressing the ACKNOWLEDGE/STEP key. The yellow system TROUBLE LED will remain on. Contact authorized service personnel immediately! (See Below). WARNING! DO NOT ALLOW TROUBLE CONDITIONS TO REMAIN LOGGED IN THE SYSTEM. THE PROTECTION THE SYSTEM OFFERS HAS BEEN COMPROMISED, OR ELIMINATED WHEN A TROUBLE CONDITION EXISTS. To return to normal after an alarm 1. Do not enter the protected area until safe to do so. 2. Clear all initiating devices. Smoke detectors will not reset if there is still smoke in the area. 3. Reset the control panel (PRESS the RESET key) Power failure or brownout If AC power drops too low or fails, the AC POWER LED will go out, the system TROUBLE LED will turn on, and the panel buzzer and any other audible trouble devices will sound, Contact authorized service personnel immediately. See below Fireirre Alarms In the event of trouble. contact the local Fire-Lite Service Representative Name Company Address, Telephone Number. Manual activation (Fire Drill or otherwise) Notification Appliance Circuits (NACs) can be activated by pressing and holding the DRILL key for at least two seconds NOTE You may want to disconnect municipal box by sliding DISCONNECT switch, located on 4XTMF module, to its disconnect position (to the right). If a DACT is con- nected, notify the monitoring service before conducting any fire drills or tests. Alarm Silencing Notification Appliance Circuits may be silenced by pressing the ALARM SILENCE key. The ALARM SILENCED LED will turn on Subsequent alarms will reactivate circuits Press the RESET key to dear the "silenced' condition. NOTE Notification Appliance Circuits may be programmed as nonsilenceable Also, Signal Silence inhibit, if enabled, will prevent silencing of NACs for one minute after an alarm (see manual). To test the lamps, LCD display and piezo sounder Press and release the RESET key and check all LED's Every LED should be on, LCD shows all pixels on, piezo sounder beeps For more information, refer to the MS-92000DLS/E Manual,, Document #52750 It is kept in the following location THIS SHEET SHALL BE FRAMED ADJACENT TO THE CONTROL PANEL Document#62773 Rev ,,A 11/04/05 ECNOS-680